. The Nukeproof Horizon Seat Clamp is CNC-machined to shed excess weight & matches perfectly with the rest of the Horizon component range. It has been CNC-machined from 6061 aluminium to remove any excess weight without effecting durability & uses a unique brass barrel for a secure fit when tightening the clamp

Features:

Material: 6061 Aluminium CNC-machined Brass barrel Laser-etched graphics Built for: All-mountain, cross-country, downhill, freeride Weight: 29g Buy Nukeproof Components from Chain Reaction Cycles, the World’s Largest Online Bike Store.



...

. The Nukeproof Horizon Seat Clamp is CNC-machined to shed excess weight & matches perfectly with the rest of the Horizon component range. It has been CNC-machined from 6061 aluminium to remove any excess weight without effecting durability & uses a unique brass barrel for a secure fit when tightening the clamp

Features:

Material: 6061 Aluminium CNC-machined Brass barrel Laser-etched graphics Built for: All-mountain, cross-country, downhill, freeride Weight: 29g Buy Nukeproof Components from Chain Reaction Cycles, the World’s Largest Online Bike Store.



...

. The Nukeproof Horizon SL Saddle was developed in conjunction with the Nukeproof DH & Enduro pro riders to offer superior comfort & light weight performance Optimised Pedaling Position & Tyre Clearance. The ergonomic design was achieved using a combination of different densities of super light foam to offer maximum comfort without increasing weight. It is curved up at the rear to hold the rider in an optimised pedalling position on long climbs & to provide more tyre clearance for longer travel bikes. It has been finished in a durable vacuum formed water repellent microfibre cover so that even on wet days it will be comfortable

Features:

Material: Glassfibre-reinforced Nylon (base), Microfibre (cover) Padding: Dual density light weight foam Dimensions: 134mm x 260mm Rails: Cr Mo Intended Use: Trail, All Mountain, Enduro, Downhill, Freeride Buy Nukeproof Components from Chain Reaction Cycles, the World’s Largest Online Bike Store.



...

. The Nukeproof Horizon SL Saddle was developed in conjunction with the Nukeproof DH & Enduro pro riders to offer superior comfort & light weight performance Optimised Pedaling Position & Tyre Clearance. The ergonomic design was achieved using a combination of different densities of super light foam to offer maximum comfort without increasing weight. It is curved up at the rear to hold the rider in an optimised pedalling position on long climbs & to provide more tyre clearance for longer travel bikes. It has been finished in a durable vacuum formed water repellent microfibre cover so that even on wet days it will be comfortable

Features:

Material: Glassfibre-reinforced Nylon (base), Microfibre (cover) Padding: Dual density light weight foam Dimensions: 134mm x 260mm Rails: Cr Mo Intended Use: Trail, All Mountain, Enduro, Downhill, Freeride Buy Nukeproof Components from Chain Reaction Cycles, the World’s Largest Online Bike Store.



...

. The Nukeproof Horizon SL Saddle was developed in conjunction with the Nukeproof DH & Enduro pro riders to offer superior comfort & light weight performance Optimised Pedaling Position & Tyre Clearance. The ergonomic design was achieved using a combination of different densities of super light foam to offer maximum comfort without increasing weight. It is curved up at the rear to hold the rider in an optimised pedalling position on long climbs & to provide more tyre clearance for longer travel bikes. It has been finished in a durable vacuum formed water repellent microfibre cover so that even on wet days it will be comfortable

Features:

Material: Glassfibre-reinforced Nylon (base), Microfibre (cover) Padding: Dual density light weight foam Dimensions: 134mm x 260mm Rails: Cr Mo Intended Use: Trail, All Mountain, Enduro, Downhill, Freeride Buy Nukeproof Components from Chain Reaction Cycles, the World’s Largest Online Bike Store.



...

. The Nukeproof Horizon Stem is the newest addition to the Nukeproof cockpit component range. Developed alongside Nukeproof pro athletes & staff, the Horizon stem has been tested in the most demanding Enduro & Downhill conditions; Nukeproof has optimised this stem to be lightweight & ultra-strong Precision CNC Machined for Strength & To Reduce Weight. The stem can be mounted either way, providing 5mm of bar height adjustability allowing you to tailor your cockpit set up with 5mm rise or fall. It has been precision CNC machined to maintain high strength & to remove unnecessary material to save weight & give a sleek modern, stylish look. Offset Design for Durability & Easier Fitting. The Horizon stem steerer clamp features an offset design, which provides maximum thread contact for the steerer bolts. All sharp edges have been removed during the machining process to ensure a smooth feel while eliminating any risk of injury should your body come in contact with the stem. The face plate has also been designed specifically with "no gap" at the top to give it a clean look & to make fitting assembly easier The fitting instructions for this stem can be found HERE for your convenience & is also included within the stem packaging

Features: Precision CNC-machined Opposing offset steerer clamp to give maximum thread contact Knee-friendly steerer clamp design Four-bolt front mount face plate Bar Clamp: 31 8mm, 35mm Steerer Diameter: 1 1/8" Length: 35mm, 50mm, 60mm Rise: +/- 5mm Stack

Height: 35mm Weight: 128g (31.8 x 35mm), 171g (35 x 50mm) Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.



...

. The Nukeproof Horizon Stem is the newest addition to the Nukeproof cockpit component range. Developed alongside Nukeproof pro athletes & staff, the Horizon stem has been tested in the most demanding Enduro & Downhill conditions; Nukeproof has optimised this stem to be lightweight & ultra-strong Precision CNC Machined for Strength & To Reduce Weight. The stem can be mounted either way, providing 5mm of bar height adjustability allowing you to tailor your cockpit set up with 5mm rise or fall. It has been precision CNC machined to maintain high strength & to remove unnecessary material to save weight & give a sleek modern, stylish look. Offset Design for Durability & Easier Fitting. The Horizon stem steerer clamp features an offset design, which provides maximum thread contact for the steerer bolts. All sharp edges have been removed during the machining process to ensure a smooth feel while eliminating any risk of injury should your body come in contact with the stem. The face plate has also been designed specifically with "no gap" at the top to give it a clean look & to make fitting assembly easier The fitting instructions for this stem can be found HERE for your convenience & is also included within the stem packaging

Features: Precision CNC-machined Opposing offset steerer clamp to give maximum thread contact Knee-friendly steerer clamp design Four-bolt front mount face plate Bar Clamp: 31 8mm, 35mm Steerer Diameter: 1 1/8" Length: 35mm, 50mm, 60mm Rise: +/- 5mm Stack

Height: 35mm Weight: 128g (31.8 x 35mm), 171g (35 x 50mm) Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.



...

. The Nukeproof Horizon Stem is the newest addition to the Nukeproof cockpit component range. Developed alongside Nukeproof pro athletes & staff, the Horizon stem has been tested in the most demanding Enduro & Downhill conditions; Nukeproof has optimised this stem to be lightweight & ultra-strong Precision CNC Machined for Strength & To Reduce Weight. The stem can be mounted either way, providing 5mm of bar height adjustability allowing you to tailor your cockpit set up with 5mm rise or fall. It has been precision CNC machined to maintain high strength & to remove unnecessary material to save weight & give a sleek modern, stylish look. Offset Design for Durability & Easier Fitting. The Horizon stem steerer clamp features an offset design, which provides maximum thread contact for the steerer bolts. All sharp edges have been removed during the machining process to ensure a smooth feel while eliminating any risk of injury should your body come in contact with the stem. The face plate has also been designed specifically with "no gap" at the top to give it a clean look & to make fitting assembly easier The fitting instructions for this stem can be found HERE for your convenience & is also included within the stem packaging

Features: Precision CNC-machined Opposing offset steerer clamp to give maximum thread contact Knee-friendly steerer clamp design Four-bolt front mount face plate Bar Clamp: 31 8mm, 35mm Steerer Diameter: 1 1/8" Length: 35mm, 50mm, 60mm Rise: +/- 5mm Stack

Height: 35mm Weight: 128g (31.8 x 35mm), 171g (35 x 50mm) Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.



...

. The Nukeproof Horizon Stem is the newest addition to the Nukeproof cockpit component range. Developed alongside Nukeproof pro athletes & staff, the Horizon stem has been tested in the most demanding Enduro & Downhill conditions; Nukeproof has optimised this stem to be lightweight & ultra-strong Precision CNC Machined for Strength & To Reduce Weight. The stem can be mounted either way, providing 5mm of bar height adjustability allowing you to tailor your cockpit set up with 5mm rise or fall. It has been precision CNC machined to maintain high strength & to remove unnecessary material to save weight & give a sleek modern, stylish look. Offset Design for Durability & Easier Fitting. The Horizon stem steerer clamp features an offset design, which provides maximum thread contact for the steerer bolts. All sharp edges have been removed during the machining process to ensure a smooth feel while eliminating any risk of injury should your body come in contact with the stem. The face plate has also been designed specifically with "no gap" at the top to give it a clean look & to make fitting assembly easier The fitting instructions for this stem can be found HERE for your convenience & is also included within the stem packaging

Features: Precision CNC-machined Opposing offset steerer clamp to give maximum thread contact Knee-friendly steerer clamp design Four-bolt front mount face plate Bar Clamp: 31 8mm, 35mm Steerer Diameter: 1 1/8" Length: 35mm, 50mm, 60mm Rise: +/- 5mm Stack

Height: 35mm Weight: 128g (31.8 x 35mm), 171g (35 x 50mm) Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.



...

. The Nukeproof Horizon Stem is the newest addition to the Nukeproof cockpit component range. Developed alongside Nukeproof pro athletes & staff, the Horizon stem has been tested in the most demanding Enduro & Downhill conditions; Nukeproof has optimised this stem to be lightweight & ultra-strong Precision CNC Machined for Strength & To Reduce Weight. The stem can be mounted either way, providing 5mm of bar height adjustability allowing you to tailor your cockpit set up with 5mm rise or fall. It has been precision CNC machined to maintain high strength & to remove unnecessary material to save weight & give a sleek modern, stylish look. Offset Design for Durability & Easier Fitting. The Horizon stem steerer clamp features an offset design, which provides maximum thread contact for the steerer bolts. All sharp edges have been removed during the machining process to ensure a smooth feel while eliminating any risk of injury should your body come in contact with the stem. The face plate has also been designed specifically with "no gap" at the top to give it a clean look & to make fitting assembly easier The fitting instructions for this stem can be found HERE for your convenience & is also included within the stem packaging

Features: Precision CNC-machined Opposing offset steerer clamp to give maximum thread contact Knee-friendly steerer clamp design Four-bolt front mount face plate Bar Clamp: 31 8mm, 35mm Steerer Diameter: 1 1/8" Length: 35mm, 50mm, 60mm Rise: +/- 5mm Stack

Height: 35mm Weight: 128g (31.8 x 35mm), 171g (35 x 50mm) Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.



...