About Us
Contact Us
Privacy Policy
Cookie Usage
Add Your Store

More From Contributor

Nukeproof Horizon Stem
- Black - With Set Up
Lines, Black
£69.99
Nukeproof Horizon Stem Tested on tough enduro & downhill trails, Nukeproof's Horizon Stem features a sturdy but sleek design, ideal for thrill seeking racing. Taking feedback from Nukeproof's expert riders & staff, this trusted mountain bike stem is lightweight without sacrificing any strength & means that you can adjust the bar height to ensure you're sitting in the optimal riding position. Precision CNC Machined for Strength & To Reduce Weight The stem can be mounted either way, providing 5mm of bar height adjustability allowing you to tailor your cockpit set up with 5mm rise or fall. It has been precision CNC machined to maintain high strength & to remove unnecessary material to save weight & give a sleek modern, stylish look. Offset Design for Durability & Easier Fitting The Horizon stem steerer clamp features an offset design, which provides maximum thread contact for the steerer bolts. All sharp edges have been removed during the machining process to ensure a smooth feel while eliminating any risk of injury should your body come in contact with the stem. The face plate has also been designed specifically with ""no gap"" at the top to give it a clean look & to make fitting assembly easier. The fitting instructions for this stem can be found HERE for your convenience & are also included within the stem packaging.
Features: Precision CNC-machined Opposing offset steerer clamp to give maximum thread contact Knee-friendly steerer clamp design Four-bolt front mount face plate Rise: +/- 5° Stack
Height: 35mm Invertible: Yes Stem Cap Included: No Weight: 128g (31.8 x 35mm), 171g (35 x 50mm) Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

...
Available
Nukeproof Horizon Stem
- Black - With Set Up
Lines, Black
£69.99
Nukeproof Horizon Stem Tested on tough enduro & downhill trails, Nukeproof's Horizon Stem features a sturdy but sleek design, ideal for thrill seeking racing. Taking feedback from Nukeproof's expert riders & staff, this trusted mountain bike stem is lightweight without sacrificing any strength & means that you can adjust the bar height to ensure you're sitting in the optimal riding position. Precision CNC Machined for Strength & To Reduce Weight The stem can be mounted either way, providing 5mm of bar height adjustability allowing you to tailor your cockpit set up with 5mm rise or fall. It has been precision CNC machined to maintain high strength & to remove unnecessary material to save weight & give a sleek modern, stylish look. Offset Design for Durability & Easier Fitting The Horizon stem steerer clamp features an offset design, which provides maximum thread contact for the steerer bolts. All sharp edges have been removed during the machining process to ensure a smooth feel while eliminating any risk of injury should your body come in contact with the stem. The face plate has also been designed specifically with ""no gap"" at the top to give it a clean look & to make fitting assembly easier. The fitting instructions for this stem can be found HERE for your convenience & are also included within the stem packaging.
Features: Precision CNC-machined Opposing offset steerer clamp to give maximum thread contact Knee-friendly steerer clamp design Four-bolt front mount face plate Rise: +/- 5° Stack
Height: 35mm Invertible: Yes Stem Cap Included: No Weight: 128g (31.8 x 35mm), 171g (35 x 50mm) Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

...
Available
Nukeproof Horizon Top
Headset Cup - Blue -
EX34-28.6 - T1, Blue
£29.99
Nukeproof Horizon Top Headset Cup Nukeproof have launched a range of headset's which use the titanium coated race bearings with stainless steel balls. The titanium coating is applied using “ Physical Vapour Deposition” which means that the material is vapourised in a vacuum environment & then deposited on the bearing races as a composition coating. This process allows the structure, density & stoichiometry of the coating to be controlled allowing the exact attributes in our design brief to be achieved. The coating is 0.000118” thick & has a molecular bond to the bearing races so it won't wear off or corrode. The bearing is ABEC 5 certified which means that it has passed tests which include ID & OD tolerance's, roundness of ball, trueness of faces & surfaces aswell as noise testing at high RPM making it the perfect bearing for use in a headset. These bearings have been designed for use in the harshest weathers & have went through various tests by the Nukeproof team during development so they are 100% confident in their performance. To back this up Nukeproof are offering a 5 year warranty so you can be rest assured your purchase will be a good one. These headsets have been revised, enhanced & expanded for optimum fit, sealing & performance as well as compatibility with a wide range of fork & frame standards. Featuring sealed angular contact bearings, split alloy crown races & upper & lower bearing cups CNC-machined from proprietary aluminium, the headset offers the optimum balance of light weight, strength & durability for performance across all riding disciplines. All models feature a super tough black hard anodised finish, with laser-etched graphics.A top cap, star nut & bolt is also included
Features:  Headset Type: Specific Top Cup  Bearings: Replaceable, angular contact type   Graphics: Laser-etched   Finish: Hard Anodised   Options: Internal & external  
Includes:: Top cap & bolt supplied             Model      Headtube Internal Diameter      Steerer              Black EX34-28.6
- T1 1.1/8" Top Cap Included      34mm      1 1/8"              Black ZS44-28.6
- T2 1.1/8" Top Cap Included      44mm      1 1/8"              Black ZS49-28.6
- T3 1.1/8" Top Cap Included      49mm      1 1/8"      Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.




...
Available
Nukeproof Horizon Top
Headset Cup - Blue -
ZS44-28.6 - T2, Blue
£29.99
Nukeproof Horizon Top Headset Cup Nukeproof have launched a range of headset's which use the titanium coated race bearings with stainless steel balls. The titanium coating is applied using “ Physical Vapour Deposition” which means that the material is vapourised in a vacuum environment & then deposited on the bearing races as a composition coating. This process allows the structure, density & stoichiometry of the coating to be controlled allowing the exact attributes in our design brief to be achieved. The coating is 0.000118” thick & has a molecular bond to the bearing races so it won't wear off or corrode. The bearing is ABEC 5 certified which means that it has passed tests which include ID & OD tolerance's, roundness of ball, trueness of faces & surfaces aswell as noise testing at high RPM making it the perfect bearing for use in a headset. These bearings have been designed for use in the harshest weathers & have went through various tests by the Nukeproof team during development so they are 100% confident in their performance. To back this up Nukeproof are offering a 5 year warranty so you can be rest assured your purchase will be a good one. These headsets have been revised, enhanced & expanded for optimum fit, sealing & performance as well as compatibility with a wide range of fork & frame standards. Featuring sealed angular contact bearings, split alloy crown races & upper & lower bearing cups CNC-machined from proprietary aluminium, the headset offers the optimum balance of light weight, strength & durability for performance across all riding disciplines. All models feature a super tough black hard anodised finish, with laser-etched graphics.A top cap, star nut & bolt is also included
Features:  Headset Type: Specific Top Cup  Bearings: Replaceable, angular contact type   Graphics: Laser-etched   Finish: Hard Anodised   Options: Internal & external  
Includes:: Top cap & bolt supplied             Model      Headtube Internal Diameter      Steerer              Black EX34-28.6
- T1 1.1/8" Top Cap Included      34mm      1 1/8"              Black ZS44-28.6
- T2 1.1/8" Top Cap Included      44mm      1 1/8"              Black ZS49-28.6
- T3 1.1/8" Top Cap Included      49mm      1 1/8"      Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.




...
Available
Nukeproof Horizon Top
Headset Cup - Blue -
ZS49-28.6 - T3, Blue
£29.99
Nukeproof Horizon Top Headset Cup Nukeproof have launched a range of headset's which use the titanium coated race bearings with stainless steel balls. The titanium coating is applied using “ Physical Vapour Deposition” which means that the material is vapourised in a vacuum environment & then deposited on the bearing races as a composition coating. This process allows the structure, density & stoichiometry of the coating to be controlled allowing the exact attributes in our design brief to be achieved. The coating is 0.000118” thick & has a molecular bond to the bearing races so it won't wear off or corrode. The bearing is ABEC 5 certified which means that it has passed tests which include ID & OD tolerance's, roundness of ball, trueness of faces & surfaces aswell as noise testing at high RPM making it the perfect bearing for use in a headset. These bearings have been designed for use in the harshest weathers & have went through various tests by the Nukeproof team during development so they are 100% confident in their performance. To back this up Nukeproof are offering a 5 year warranty so you can be rest assured your purchase will be a good one. These headsets have been revised, enhanced & expanded for optimum fit, sealing & performance as well as compatibility with a wide range of fork & frame standards. Featuring sealed angular contact bearings, split alloy crown races & upper & lower bearing cups CNC-machined from proprietary aluminium, the headset offers the optimum balance of light weight, strength & durability for performance across all riding disciplines. All models feature a super tough black hard anodised finish, with laser-etched graphics.A top cap, star nut & bolt is also included
Features:  Headset Type: Specific Top Cup  Bearings: Replaceable, angular contact type   Graphics: Laser-etched   Finish: Hard Anodised   Options: Internal & external  
Includes:: Top cap & bolt supplied             Model      Headtube Internal Diameter      Steerer              Black EX34-28.6
- T1 1.1/8" Top Cap Included      34mm      1 1/8"              Black ZS44-28.6
- T2 1.1/8" Top Cap Included      44mm      1 1/8"              Black ZS49-28.6
- T3 1.1/8" Top Cap Included      49mm      1 1/8"      Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.




...
Available
Nukeproof Horizon Top
Headset Cup - Copper -
ZS44-28.6 - T2,
Copper
£29.99
Nukeproof Horizon Top Headset Cup Nukeproof have launched a range of headset's which use the titanium coated race bearings with stainless steel balls. The titanium coating is applied using “ Physical Vapour Deposition” which means that the material is vapourised in a vacuum environment & then deposited on the bearing races as a composition coating. This process allows the structure, density & stoichiometry of the coating to be controlled allowing the exact attributes in our design brief to be achieved. The coating is 0.000118” thick & has a molecular bond to the bearing races so it won't wear off or corrode. The bearing is ABEC 5 certified which means that it has passed tests which include ID & OD tolerance's, roundness of ball, trueness of faces & surfaces aswell as noise testing at high RPM making it the perfect bearing for use in a headset. These bearings have been designed for use in the harshest weathers & have went through various tests by the Nukeproof team during development so they are 100% confident in their performance. To back this up Nukeproof are offering a 5 year warranty so you can be rest assured your purchase will be a good one. These headsets have been revised, enhanced & expanded for optimum fit, sealing & performance as well as compatibility with a wide range of fork & frame standards. Featuring sealed angular contact bearings, split alloy crown races & upper & lower bearing cups CNC-machined from proprietary aluminium, the headset offers the optimum balance of light weight, strength & durability for performance across all riding disciplines. All models feature a super tough black hard anodised finish, with laser-etched graphics.A top cap, star nut & bolt is also included
Features:  Headset Type: Specific Top Cup  Bearings: Replaceable, angular contact type   Graphics: Laser-etched   Finish: Hard Anodised   Options: Internal & external  
Includes:: Top cap & bolt supplied             Model      Headtube Internal Diameter      Steerer              Black EX34-28.6
- T1 1.1/8" Top Cap Included      34mm      1 1/8"              Black ZS44-28.6
- T2 1.1/8" Top Cap Included      44mm      1 1/8"              Black ZS49-28.6
- T3 1.1/8" Top Cap Included      49mm      1 1/8"      Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.




...
Available
Nukeproof Horizon Top
Headset Cup - Copper -
ZS49-28.6 - T3,
Copper
£29.99
Nukeproof Horizon Top Headset Cup Nukeproof have launched a range of headset's which use the titanium coated race bearings with stainless steel balls. The titanium coating is applied using “ Physical Vapour Deposition” which means that the material is vapourised in a vacuum environment & then deposited on the bearing races as a composition coating. This process allows the structure, density & stoichiometry of the coating to be controlled allowing the exact attributes in our design brief to be achieved. The coating is 0.000118” thick & has a molecular bond to the bearing races so it won't wear off or corrode. The bearing is ABEC 5 certified which means that it has passed tests which include ID & OD tolerance's, roundness of ball, trueness of faces & surfaces aswell as noise testing at high RPM making it the perfect bearing for use in a headset. These bearings have been designed for use in the harshest weathers & have went through various tests by the Nukeproof team during development so they are 100% confident in their performance. To back this up Nukeproof are offering a 5 year warranty so you can be rest assured your purchase will be a good one. These headsets have been revised, enhanced & expanded for optimum fit, sealing & performance as well as compatibility with a wide range of fork & frame standards. Featuring sealed angular contact bearings, split alloy crown races & upper & lower bearing cups CNC-machined from proprietary aluminium, the headset offers the optimum balance of light weight, strength & durability for performance across all riding disciplines. All models feature a super tough black hard anodised finish, with laser-etched graphics.A top cap, star nut & bolt is also included
Features:  Headset Type: Specific Top Cup  Bearings: Replaceable, angular contact type   Graphics: Laser-etched   Finish: Hard Anodised   Options: Internal & external  
Includes:: Top cap & bolt supplied             Model      Headtube Internal Diameter      Steerer              Black EX34-28.6
- T1 1.1/8" Top Cap Included      34mm      1 1/8"              Black ZS44-28.6
- T2 1.1/8" Top Cap Included      44mm      1 1/8"              Black ZS49-28.6
- T3 1.1/8" Top Cap Included      49mm      1 1/8"      Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.




...
Available
Nukeproof Horizon Top
Headset Cup - Grey -
EX34-28.6 - T1, Grey
£29.99
Nukeproof Horizon Top Headset Cup Nukeproof have launched a range of headset's which use the titanium coated race bearings with stainless steel balls. The titanium coating is applied using “ Physical Vapour Deposition” which means that the material is vapourised in a vacuum environment & then deposited on the bearing races as a composition coating. This process allows the structure, density & stoichiometry of the coating to be controlled allowing the exact attributes in our design brief to be achieved. The coating is 0.000118” thick & has a molecular bond to the bearing races so it won't wear off or corrode. The bearing is ABEC 5 certified which means that it has passed tests which include ID & OD tolerance's, roundness of ball, trueness of faces & surfaces aswell as noise testing at high RPM making it the perfect bearing for use in a headset. These bearings have been designed for use in the harshest weathers & have went through various tests by the Nukeproof team during development so they are 100% confident in their performance. To back this up Nukeproof are offering a 5 year warranty so you can be rest assured your purchase will be a good one. These headsets have been revised, enhanced & expanded for optimum fit, sealing & performance as well as compatibility with a wide range of fork & frame standards. Featuring sealed angular contact bearings, split alloy crown races & upper & lower bearing cups CNC-machined from proprietary aluminium, the headset offers the optimum balance of light weight, strength & durability for performance across all riding disciplines. All models feature a super tough black hard anodised finish, with laser-etched graphics.A top cap, star nut & bolt is also included
Features:  Headset Type: Specific Top Cup  Bearings: Replaceable, angular contact type   Graphics: Laser-etched   Finish: Hard Anodised   Options: Internal & external  
Includes:: Top cap & bolt supplied             Model      Headtube Internal Diameter      Steerer              Black EX34-28.6
- T1 1.1/8" Top Cap Included      34mm      1 1/8"              Black ZS44-28.6
- T2 1.1/8" Top Cap Included      44mm      1 1/8"              Black ZS49-28.6
- T3 1.1/8" Top Cap Included      49mm      1 1/8"      Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.




...
Available
Nukeproof Horizon Top
Headset Cup - Grey -
ZS44-28.6 - T2, Grey
£29.99
Nukeproof Horizon Top Headset Cup Nukeproof have launched a range of headset's which use the titanium coated race bearings with stainless steel balls. The titanium coating is applied using “ Physical Vapour Deposition” which means that the material is vapourised in a vacuum environment & then deposited on the bearing races as a composition coating. This process allows the structure, density & stoichiometry of the coating to be controlled allowing the exact attributes in our design brief to be achieved. The coating is 0.000118” thick & has a molecular bond to the bearing races so it won't wear off or corrode. The bearing is ABEC 5 certified which means that it has passed tests which include ID & OD tolerance's, roundness of ball, trueness of faces & surfaces aswell as noise testing at high RPM making it the perfect bearing for use in a headset. These bearings have been designed for use in the harshest weathers & have went through various tests by the Nukeproof team during development so they are 100% confident in their performance. To back this up Nukeproof are offering a 5 year warranty so you can be rest assured your purchase will be a good one. These headsets have been revised, enhanced & expanded for optimum fit, sealing & performance as well as compatibility with a wide range of fork & frame standards. Featuring sealed angular contact bearings, split alloy crown races & upper & lower bearing cups CNC-machined from proprietary aluminium, the headset offers the optimum balance of light weight, strength & durability for performance across all riding disciplines. All models feature a super tough black hard anodised finish, with laser-etched graphics.A top cap, star nut & bolt is also included
Features:  Headset Type: Specific Top Cup  Bearings: Replaceable, angular contact type   Graphics: Laser-etched   Finish: Hard Anodised   Options: Internal & external  
Includes:: Top cap & bolt supplied             Model      Headtube Internal Diameter      Steerer              Black EX34-28.6
- T1 1.1/8" Top Cap Included      34mm      1 1/8"              Black ZS44-28.6
- T2 1.1/8" Top Cap Included      44mm      1 1/8"              Black ZS49-28.6
- T3 1.1/8" Top Cap Included      49mm      1 1/8"      Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.




...
Available
Nukeproof Horizon Top
Headset Cup - Grey -
ZS49-28.6 - T3, Grey
£29.99
Nukeproof Horizon Top Headset Cup Nukeproof have launched a range of headset's which use the titanium coated race bearings with stainless steel balls. The titanium coating is applied using “ Physical Vapour Deposition” which means that the material is vapourised in a vacuum environment & then deposited on the bearing races as a composition coating. This process allows the structure, density & stoichiometry of the coating to be controlled allowing the exact attributes in our design brief to be achieved. The coating is 0.000118” thick & has a molecular bond to the bearing races so it won't wear off or corrode. The bearing is ABEC 5 certified which means that it has passed tests which include ID & OD tolerance's, roundness of ball, trueness of faces & surfaces aswell as noise testing at high RPM making it the perfect bearing for use in a headset. These bearings have been designed for use in the harshest weathers & have went through various tests by the Nukeproof team during development so they are 100% confident in their performance. To back this up Nukeproof are offering a 5 year warranty so you can be rest assured your purchase will be a good one. These headsets have been revised, enhanced & expanded for optimum fit, sealing & performance as well as compatibility with a wide range of fork & frame standards. Featuring sealed angular contact bearings, split alloy crown races & upper & lower bearing cups CNC-machined from proprietary aluminium, the headset offers the optimum balance of light weight, strength & durability for performance across all riding disciplines. All models feature a super tough black hard anodised finish, with laser-etched graphics.A top cap, star nut & bolt is also included
Features:  Headset Type: Specific Top Cup  Bearings: Replaceable, angular contact type   Graphics: Laser-etched   Finish: Hard Anodised   Options: Internal & external  
Includes:: Top cap & bolt supplied             Model      Headtube Internal Diameter      Steerer              Black EX34-28.6
- T1 1.1/8" Top Cap Included      34mm      1 1/8"              Black ZS44-28.6
- T2 1.1/8" Top Cap Included      44mm      1 1/8"              Black ZS49-28.6
- T3 1.1/8" Top Cap Included      49mm      1 1/8"      Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.




...
Available

Nukeproof Horizon Top Headset Cup - Copper - EX34-28.6 - T1, Copper

Nukeproof Horizon Top Headset CupNukeproof have launched a range of headset's which use the titanium coated race bearings with stainless steel balls. The titanium coating is applied using “Physical Vapour Deposition” which means that the material is vapourised in a vacuum environment and then deposited on the bearing races as a composition coating. This process allows the structure, density and stoichiometry of the coating to be controlled allowing the exact attributes in our design brief to be achieved. The coating is 0.000118” thick and has a molecular bond to the bearing races so it won't wear off or corrode. The bearing is ABEC 5 certified which means that it has passed tests which include ID and OD tolerance's, roundness of ball, trueness of faces & surfaces aswell as noise
testing at high RPM making it the perfect bearing for use in a headset. These bearings have been designed for use in the harshest weathers and have went through various tests by the Nukeproof team during development so they are 100% confident in their performance. To back this up Nukeproof are offering a 5 year warranty so you can be rest assured your purchase will be a good one. These headsets have been revised, improved and expanded for optimum fit, sealing and performance as well as compatibility with a wide range of fork and frame standards. Featuring sealed angular contact bearings, split alloy crown races and upper and lower bearing cups CNC-machined from proprietary aluminium, the headset offers the optimum balance of light weight, strength and durability for performance across
all riding disciplines.All models feature a super tough black hard anodised finish, with laser-etched graphics.A top cap, star nut and bolt is also includedFeatures:  Headset Type: Specific Top Cup  Bearings: Replaceable, angular contact type   Graphics: Laser-etched   Finish: Hard Anodised   Options: Internal and external   Includes: Top cap and bolt supplied             Model      Headtube Internal Diameter      Steerer              Black EX34-28.6 - T1 1.1/8" Top Cap Included      34mm      1 1/8"              Black ZS44-28.6 - T2 1.1/8" Top Cap Included      44mm      1 1/8"              Black ZS49-28.6 - T3 1.1/8" Top Cap Included      49mm      1 1/8"      Buy Nukeproof Components from Chain
Reaction Cycles, the World's Largest Online Bike Store.
Buy
Availability: In Stock
£29.99
cycling Cycling
Description Reviews / Comments Add New

Product Description

Nukeproof Horizon Top Headset Cup Nukeproof have launched a range of headset's which use the titanium coated race bearings with stainless steel balls. The titanium coating is applied using “ Physical Vapour Deposition” which means that the material is vapourised in a vacuum environment & then deposited on the bearing races as a composition coating. This process allows the structure, density & stoichiometry of the coating to be controlled allowing the exact attributes in our design brief to be achieved. The coating is 0.000118” thick & has a molecular bond to the bearing races so it won't wear off or corrode. The bearing is ABEC 5 certified which means that it has passed tests which include ID & OD tolerance's, roundness of ball, trueness of faces & surfaces aswell as noise testing at high RPM making it the perfect bearing for use in a headset. These bearings have been designed for use in the harshest weathers & have went through various tests by the Nukeproof team during development so they are 100% confident in their performance. To back this up Nukeproof are offering a 5 year warranty so you can be rest assured your purchase will be a good one. These headsets have been revised, enhanced & expanded for optimum fit, sealing & performance as well as compatibility with a wide range of fork & frame standards. Featuring sealed angular contact bearings, split alloy crown races & upper & lower bearing cups CNC-machined from proprietary aluminium, the headset offers the optimum balance of light weight, strength & durability for performance across all riding disciplines. All models feature a super tough black hard anodised finish, with laser-etched graphics.A top cap, star nut & bolt is also included
Features:  Headset Type: Specific Top Cup  Bearings: Replaceable, angular contact type   Graphics: Laser-etched   Finish: Hard Anodised   Options: Internal & external  
Includes:: Top cap & bolt supplied             Model      Headtube Internal Diameter      Steerer              Black EX34-28.6
- T1 1.1/8" Top Cap Included      34mm      1 1/8"              Black ZS44-28.6
- T2 1.1/8" Top Cap Included      44mm      1 1/8"              Black ZS49-28.6
- T3 1.1/8" Top Cap Included      49mm      1 1/8"      Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Reviews/Comments

Add New

Intelligent Comparison

Oooops!
We couldn't find anything!
Perhaps this product's unique.... Or perhaps we are still looking for comparisons!
Click to bump this page and we'll hurry up.

Price History

Oooops!
We couldn't find any historical pricing!

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Aluminium - Corrosion resistant lightweight metal
Stainless steel - A stain and corrosion resistant steel blend
Copper - A metal element with a chemical formula of CU. A excellent conductor of electricity and heat.
Black - A colour which does not emit any colour of the spectrum. Black absorbs all frequencies of the spectrum.
Diameter - A measurement across a circle passing through the middle
Steel - An alloy made predominately of Iron combined with <2% carbon
Warranty - A service provided by the retailer or manufacturer to ensure a device works for a period from new
star - A giant ball of plasma held together by gravity.
team - A group of people or animals linked by a common purpose.
Graphics - A general term for visual aspects of an item/display
Physical - Used to describe strength or visual properties of an item
World - A physical grouping, commonly used to describe earth and everything associated with ti
RPM - Revolutionss per minute, the number of rotations per minute around a fixed axel.
weight - A measure of the force applied on an object by gravity. Measured metric in grams and kilos or imperial in lbs and oz
Year - The time it takes the planet earth to orbit the sun. This takes around 365.25 days.
Components - Multiple items used to complete the product.
Warranty - A purchasers guarantee from the manufacturer for replacement/fix of goods when faulty.
Vacuum - An area which does not have any matter in it.
Wide - Something with a large width.
Balance - Something that is evenly weighted to keep something upright.
Bearings - A direction or a way someone moves around.
Composition - A way in which something is made up.
Year - 365 days (366 days in a leap year), the time taken for planet earth to make one full revolution around the sun.
Design - A drawing or styles that shows the look and functionality of something before its made.
Angular - Something that has sharp corners or angles.
Feature - An attribute that makes something stand out.
Performance - When someone is presenting a form of entertainment, also how well someone is doing within a role.
Model - A representation of a person or thing, usually smaller scale. It can also be a person that wears clothing.
Environment - The conditions and surrounding area.
Vacuum - A space, void, containing no matter
Vacuum - A consumer device utilising an air pump to create a vacuum which sucks up dust and dirt.

Supplier Information

Chain Reaction Cycles
Chain Reaction Cycles offers a great collection of cycling gear right from everyday bikes and special makes intended for use on rough terrain or races, to knee guards, shoes and cycling outfits, including an exhaustive list of components and spare parts, brakes, drive trains, frames and forks, wheels and tyres, and protective gear. The buyer would just be spoilt for choice under most scenarios. This is the most appropriate location for cycling enthusiasts of all types; casual, health-conscious, adventurous or even the professional racers. The site stocks gear from reputed brands and guarantees a 5 per cent price drop in the price everyday as long as the stocks last. Online shopping facility is available at the site, with free delivery and money-back options. CRC also offers periodic clearance sale offers with good enough discount margins. Those training or participating in Triathlon events will find CRC particularly helpful as the site offers choicest and unique accessories appropriate for each stage of the event, swimming, running and cycling, with nutritional and training supplements also being part of the product line.
Page Updated: 2021-06-06 11:05:47

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu