Nukeproof Horizon V2 Front Wheel This MTB front wheel features a revised design, which gives you fast & smooth-rolling performance as you shred the trails. Coming equipped with Nukeproof's extensively trailed & tested alloy blend, its rim construction is specifically made to meet the demands of both enduro & DH riders. Producing a hardness similar to 7-series alloy but with the ductility & yield properties of a 6-series, this front wheel gives you the best of both worlds in terms of strength, stiffness & weight. Nukeproof has ensured this front wheel's rim profile is the same as the rear (sold separately), with the only difference being that the front has a thinner sidewall for greater weight savings. Another benefit is it comes equipped with J-bend spokes, which means that tensioning & spoke replacement is quick & easy. Enduro ABEC 5 Bearings After extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this front wheel. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate. LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box & after a couple of rides it will become free. Nukeproof Horizon V2 Hub This MTB front wheel features a revised Nukeproof Horizon V2 hub, which is available for both 15mm & 20mm spacings in both boost & non boost. We also sell end caps for QR separately. What's Included? Wheels come taped with tubeless valve installed so all you need to do is fit your tyre & add sealant. The tubeless valve supplied is the revised Nukeproof Horizon valve, which is compatible with Nukeproof ARD & other tyre inserts, as well as the cap having a core remover built-in. Spoke lengths on Nukeproof wheels are the same regardless of spacing, the length changes with wheel

Size: Wheel Wheel Size Non Drive Side Spoke Length Driveside Spoke Length Front 27.5" 269 270 Front 29" 288 289 Conversion kits & replacement end caps available separately. Caps Nukeproof Part Number Replacement or Conversion Front 9mm QR NUKHORV2F9QRCAPS 15mm Non Boost Hub to QR Front 15mm NUKHORV2F15CAPS Replacement 15mm caps Front 20mm NUKHORV2F20CAPS Replacement 20mm caps

Features: Rim

Material: Alloy Nukeproof Blend Use: MTB, All Mountain, Enduro & DH Spacing Options: 15x 100mm; 15x 110mm; 20x 110mm Non Boost & 20x 110mm Boost Wheel

Size: 27.5" or 29" options Inner Rim

Width: 30mm Outer Rim

Width: 35mm Rim

Height: 21.6mm Tubeless Ready: Yes, pre-taped & valve supplied Spoke Count: 32 Spoke Type: J-Bend Disc Mount: 6-Bolt Lacing Pattern: 3x Build: Hand built Single or Pair: Single Weight: 27.5” 15mm Boost: 884g; 27.5” 20mm Boost: 946g Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.













...

Nukeproof Horizon V2 Front Wheel This MTB front wheel features a revised design, which gives you fast & smooth-rolling performance as you shred the trails. Coming equipped with Nukeproof's extensively trailed & tested alloy blend, its rim construction is specifically made to meet the demands of both enduro & DH riders. Producing a hardness similar to 7-series alloy but with the ductility & yield properties of a 6-series, this front wheel gives you the best of both worlds in terms of strength, stiffness & weight. Nukeproof has ensured this front wheel's rim profile is the same as the rear (sold separately), with the only difference being that the front has a thinner sidewall for greater weight savings. Another benefit is it comes equipped with J-bend spokes, which means that tensioning & spoke replacement is quick & easy. Enduro ABEC 5 Bearings After extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this front wheel. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate. LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box & after a couple of rides it will become free. Nukeproof Horizon V2 Hub This MTB front wheel features a revised Nukeproof Horizon V2 hub, which is available for both 15mm & 20mm spacings in both boost & non boost. We also sell end caps for QR separately. What's Included? Wheels come taped with tubeless valve installed so all you need to do is fit your tyre & add sealant. The tubeless valve supplied is the revised Nukeproof Horizon valve, which is compatible with Nukeproof ARD & other tyre inserts, as well as the cap having a core remover built-in. Spoke lengths on Nukeproof wheels are the same regardless of spacing, the length changes with wheel

Size: Wheel Wheel Size Non Drive Side Spoke Length Driveside Spoke Length Front 27.5" 269 270 Front 29" 288 289 Conversion kits & replacement end caps available separately. Caps Nukeproof Part Number Replacement or Conversion Front 9mm QR NUKHORV2F9QRCAPS 15mm Non Boost Hub to QR Front 15mm NUKHORV2F15CAPS Replacement 15mm caps Front 20mm NUKHORV2F20CAPS Replacement 20mm caps

Features: Rim

Material: Alloy Nukeproof Blend Use: MTB, All Mountain, Enduro & DH Spacing Options: 15x 100mm; 15x 110mm; 20x 110mm Non Boost & 20x 110mm Boost Wheel

Size: 27.5" or 29" options Inner Rim

Width: 30mm Outer Rim

Width: 35mm Rim

Height: 21.6mm Tubeless Ready: Yes, pre-taped & valve supplied Spoke Count: 32 Spoke Type: J-Bend Disc Mount: 6-Bolt Lacing Pattern: 3x Build: Hand built Single or Pair: Single Weight: 27.5” 15mm Boost: 884g; 27.5” 20mm Boost: 946g Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.













...

Nukeproof Horizon V2 Front Wheel This MTB front wheel features a revised design, which gives you fast & smooth-rolling performance as you shred the trails. Coming equipped with Nukeproof's extensively trailed & tested alloy blend, its rim construction is specifically made to meet the demands of both enduro & DH riders. Producing a hardness similar to 7-series alloy but with the ductility & yield properties of a 6-series, this front wheel gives you the best of both worlds in terms of strength, stiffness & weight. Nukeproof has ensured this front wheel's rim profile is the same as the rear (sold separately), with the only difference being that the front has a thinner sidewall for greater weight savings. Another benefit is it comes equipped with J-bend spokes, which means that tensioning & spoke replacement is quick & easy. Enduro ABEC 5 Bearings After extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this front wheel. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate. LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box & after a couple of rides it will become free. Nukeproof Horizon V2 Hub This MTB front wheel features a revised Nukeproof Horizon V2 hub, which is available for both 15mm & 20mm spacings in both boost & non boost. We also sell end caps for QR separately. What's Included? Wheels come taped with tubeless valve installed so all you need to do is fit your tyre & add sealant. The tubeless valve supplied is the revised Nukeproof Horizon valve, which is compatible with Nukeproof ARD & other tyre inserts, as well as the cap having a core remover built-in. Spoke lengths on Nukeproof wheels are the same regardless of spacing, the length changes with wheel

Size: Wheel Wheel Size Non Drive Side Spoke Length Driveside Spoke Length Front 27.5" 269 270 Front 29" 288 289 Conversion kits & replacement end caps available separately. Caps Nukeproof Part Number Replacement or Conversion Front 9mm QR NUKHORV2F9QRCAPS 15mm Non Boost Hub to QR Front 15mm NUKHORV2F15CAPS Replacement 15mm caps Front 20mm NUKHORV2F20CAPS Replacement 20mm caps

Features: Rim

Material: Alloy Nukeproof Blend Use: MTB, All Mountain, Enduro & DH Spacing Options: 15x 100mm; 15x 110mm; 20x 110mm Non Boost & 20x 110mm Boost Wheel

Size: 27.5" or 29" options Inner Rim

Width: 30mm Outer Rim

Width: 35mm Rim

Height: 21.6mm Tubeless Ready: Yes, pre-taped & valve supplied Spoke Count: 32 Spoke Type: J-Bend Disc Mount: 6-Bolt Lacing Pattern: 3x Build: Hand built Single or Pair: Single Weight: 27.5” 15mm Boost: 884g; 27.5” 20mm Boost: 946g Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.













...

Nukeproof Horizon V2 Front Wheel This MTB front wheel features a revised design, which gives you fast & smooth-rolling performance as you shred the trails. Coming equipped with Nukeproof's extensively trailed & tested alloy blend, its rim construction is specifically made to meet the demands of both enduro & DH riders. Producing a hardness similar to 7-series alloy but with the ductility & yield properties of a 6-series, this front wheel gives you the best of both worlds in terms of strength, stiffness & weight. Nukeproof has ensured this front wheel's rim profile is the same as the rear (sold separately), with the only difference being that the front has a thinner sidewall for greater weight savings. Another benefit is it comes equipped with J-bend spokes, which means that tensioning & spoke replacement is quick & easy. Enduro ABEC 5 Bearings After extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this front wheel. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate. LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box & after a couple of rides it will become free. Nukeproof Horizon V2 Hub This MTB front wheel features a revised Nukeproof Horizon V2 hub, which is available for both 15mm & 20mm spacings in both boost & non boost. We also sell end caps for QR separately. What's Included? Wheels come taped with tubeless valve installed so all you need to do is fit your tyre & add sealant. The tubeless valve supplied is the revised Nukeproof Horizon valve, which is compatible with Nukeproof ARD & other tyre inserts, as well as the cap having a core remover built-in. Spoke lengths on Nukeproof wheels are the same regardless of spacing, the length changes with wheel

Size: Wheel Wheel Size Non Drive Side Spoke Length Driveside Spoke Length Front 27.5" 269 270 Front 29" 288 289 Conversion kits & replacement end caps available separately. Caps Nukeproof Part Number Replacement or Conversion Front 9mm QR NUKHORV2F9QRCAPS 15mm Non Boost Hub to QR Front 15mm NUKHORV2F15CAPS Replacement 15mm caps Front 20mm NUKHORV2F20CAPS Replacement 20mm caps

Features: Rim

Material: Alloy Nukeproof Blend Use: MTB, All Mountain, Enduro & DH Spacing Options: 15x 100mm; 15x 110mm; 20x 110mm Non Boost & 20x 110mm Boost Wheel

Size: 27.5" or 29" options Inner Rim

Width: 30mm Outer Rim

Width: 35mm Rim

Height: 21.6mm Tubeless Ready: Yes, pre-taped & valve supplied Spoke Count: 32 Spoke Type: J-Bend Disc Mount: 6-Bolt Lacing Pattern: 3x Build: Hand built Single or Pair: Single Weight: 27.5” 15mm Boost: 884g; 27.5” 20mm Boost: 946g Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.













...

Nukeproof Horizon V2 Front Wheel This MTB front wheel features a revised design, which gives you fast & smooth-rolling performance as you shred the trails. Coming equipped with Nukeproof's extensively trailed & tested alloy blend, its rim construction is specifically made to meet the demands of both enduro & DH riders. Producing a hardness similar to 7-series alloy but with the ductility & yield properties of a 6-series, this front wheel gives you the best of both worlds in terms of strength, stiffness & weight. Nukeproof has ensured this front wheel's rim profile is the same as the rear (sold separately), with the only difference being that the front has a thinner sidewall for greater weight savings. Another benefit is it comes equipped with J-bend spokes, which means that tensioning & spoke replacement is quick & easy. Enduro ABEC 5 Bearings After extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this front wheel. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate. LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box & after a couple of rides it will become free. Nukeproof Horizon V2 Hub This MTB front wheel features a revised Nukeproof Horizon V2 hub, which is available for both 15mm & 20mm spacings in both boost & non boost. We also sell end caps for QR separately. What's Included? Wheels come taped with tubeless valve installed so all you need to do is fit your tyre & add sealant. The tubeless valve supplied is the revised Nukeproof Horizon valve, which is compatible with Nukeproof ARD & other tyre inserts, as well as the cap having a core remover built-in. Spoke lengths on Nukeproof wheels are the same regardless of spacing, the length changes with wheel

Size: Wheel Wheel Size Non Drive Side Spoke Length Driveside Spoke Length Front 27.5" 269 270 Front 29" 288 289 Conversion kits & replacement end caps available separately. Caps Nukeproof Part Number Replacement or Conversion Front 9mm QR NUKHORV2F9QRCAPS 15mm Non Boost Hub to QR Front 15mm NUKHORV2F15CAPS Replacement 15mm caps Front 20mm NUKHORV2F20CAPS Replacement 20mm caps

Features: Rim

Material: Alloy Nukeproof Blend Use: MTB, All Mountain, Enduro & DH Spacing Options: 15x 100mm; 15x 110mm; 20x 110mm Non Boost & 20x 110mm Boost Wheel

Size: 27.5" or 29" options Inner Rim

Width: 30mm Outer Rim

Width: 35mm Rim

Height: 21.6mm Tubeless Ready: Yes, pre-taped & valve supplied Spoke Count: 32 Spoke Type: J-Bend Disc Mount: 6-Bolt Lacing Pattern: 3x Build: Hand built Single or Pair: Single Weight: 27.5” 15mm Boost: 884g; 27.5” 20mm Boost: 946g Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.













...

Nukeproof Horizon V2 Pawls & Springs These pawls & springs are designed to replace the ones that came with Nukeproof Horizon V2 hubs. This set

Includes:: six pawls & six springs as well as a plastic cover for the Nukeproof Horizon V2 freehub. Nukeproof offers two options in these which are loud or quiet & are available to select separately. This is due to Nukeproof hubs coming with the loud pawls & springs pre-installed as standard, but there is also the option for a quieter ride if you prefer it.
Features: Use: MTB Compatibility: Nukeproof Horizon V2 hubs
Includes:: x 6 pawls; x 6 springs plus Plastic cover for the freehub Compatibility: Nukeproof Horizon V2 hubs Compatibility: Nukeproof Horizon V2 hubs Nukeproof Part Numbers: Loud: NUKHORV2PSGOLD; Quiet: NUKHORV2PSSILBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.



...

Nukeproof Horizon V2 Rear Axle This MTB axle is specifically designed as a direct replacement for the original rear axle that comes with Nukeproof Horizon V2 hubs. This rear axle is available in 142mm, 148mm & 150mm axle options. You will need to choose the correct axle to suit your hub spacing.
Features: Use: MTBCompatibility: Replacement axle for Nukeproof Horizon V2 hubs Nukeproof Part Numbers: 142mm: NUKHORV2142AXLE; 148mm: NUKHORV2148AXLE & 150mm: NUKHORV2150AXLEBuy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
...

Nukeproof Horizon V2 Rear Axle This MTB axle is specifically designed as a direct replacement for the original rear axle that comes with Nukeproof Horizon V2 hubs. This rear axle is available in 142mm, 148mm & 150mm axle options. You will need to choose the correct axle to suit your hub spacing.
Features: Use: MTBCompatibility: Replacement axle for Nukeproof Horizon V2 hubs Nukeproof Part Numbers: 142mm: NUKHORV2142AXLE; 148mm: NUKHORV2148AXLE & 150mm: NUKHORV2150AXLEBuy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
...

Nukeproof Horizon V2 Rear Axle This MTB axle is specifically designed as a direct replacement for the original rear axle that comes with Nukeproof Horizon V2 hubs. This rear axle is available in 142mm, 148mm & 150mm axle options. You will need to choose the correct axle to suit your hub spacing.
Features: Use: MTBCompatibility: Replacement axle for Nukeproof Horizon V2 hubs Nukeproof Part Numbers: 142mm: NUKHORV2142AXLE; 148mm: NUKHORV2148AXLE & 150mm: NUKHORV2150AXLEBuy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
...

Nukeproof Horizon V2 Rear Wheel 102t This MTB rear wheel features a revised design, which gives you fast & smooth-rolling performance as you shred the trails. Coming equipped with Nukeproof's extensively trailed & tested alloy blend, its rim construction is specifically made to meet the demands of both enduro & DH riders. Producing a hardness similar to 7-series alloy but with the ductility & yield properties of a 6-series, this rear wheel gives you the best of both worlds in terms of strength, stiffness & weight. Nukeproof has ensured this rear wheel's rim profile is the same as the front (sold separately), with the only difference being that the rear has a thicker sidewall for added strength on the trails. Another benefit is it comes equipped with J-bend spokes, which means that tensioning & spoke replacement is quick & easy. Enduro ABEC 5 Bearings After extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this rear wheel. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate. LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box & after a couple of rides it will become free. Nukeproof Horizon V2 Hub This MTB rear wheel features a revised Nukeproof Horizon V2 hub that now has 102 points of engagement & comes in a range of freehub options. Freehubs are also available separately & easily changeable if you choose upgrade your drivetrain in the future. Nukeproof's 142mm hub can be converted to 135mm QR & the 148mm hub can be converted to 141mm using end caps. The hub has also been machined to remove excess material & make it as strong & light as possible. Nukeproof has fitted these hubs with our louder pawls & springs, this gives the wheel a nice buzz as you head down the trail. If you prefer the quiet life, you can get the quieter ones which are available separately. What's Included? Wheels come taped with tubeless valve installed so all you need to do is fit your tyre & add sealant. The tubeless valve supplied is the new Nukeproof Horizon valve which is compatible with Nukeproof ARD & other tyre inserts aswell as the cap having a core remover built in. A full range of spares are available to service your hub in the future. Spoke length's on Nukeproof wheels are the same regardless of spacing, the length changes with wheel

Size: Wheel Wheel Size Non Drive Side Spoke Length Driveside Spoke Length Rear 27.5" 271 268 Rear 29" 289 286 Conversion kits & replacement end caps available separately. Caps Nukeproof Part Number Replacement or Conversion Rear 135mm QR   NUKHORV2R135CAPS  Convert Non Boost 142mm hub to QR Rear 141mm  NUKHORV2R141BCAPS   Convert Boost 148mm hub to 141mm QR Rear 142/148/157mm  NUKHORV2R148CAPS  Replacement caps for 142mm, 148mm & 157mm  Rear 150mm     NUKHORV2R150CAPS  Replacement 150mm caps

Features: Rim

Material: Alloy Nukeproof Blend Use: MTB, All Mountain, Enduro & DH Spacing Options: 142x 12mm; 148x 12mm & 150/157x 12mm Conversion Options: 142x 12mm can be converted to 135mm QR, 148x 12mm can be converted to 141mm Boost with end caps (sold separately) Freehub Options: Shimano HG, Shimano Microspline & SRAM XD Rear Hub Engagement: 102 points of engagement (every 3.52°) Wheel

Size: 27.5" or 29" options Inner Rim

Width: 30mm Outer Rim

Width: 35mm Rim

Height: 21.6mm Tubeless Ready: Yes, pre-taped & valve supplied Spoke Count: 32 Spoke Type: J-Bend Disc Mount: 6-Bolt Lacing Pattern: 3x Build: Hand built Single or Pair: Single Weight: 27.5” 148x 12mm: 1093g; 27.5” 150x 12mm: 1116g Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.













...