Ritchey WCS C220 Stem The Ritchey WCS 220 Stem improves  the performance benefits from the Ritchey C260 stem, being lighter, more  durable & easy to install. The WCS 220 is faster & easier to install or remove  thanks to the press-fit handlebar clamp interface which makes fitting to your  bike & attaching your handlebars instant & the forward-facing hardware makes  fine tune adjustments a breeze. Secure & Stable Handlebar Engagement The C220 handlebar clamp design  interface creates a secure & stable handlebar engagement, which increases  handlebar stiffness. The bolt engagements are aligned with the clamp face so  that it holds the handlebar efficiently & avoids handlebar wear by reducing  flexing. This specific clamp design means that the faceplate & stem body can  be lighter & does not sacrifice reliability, strength or stiffness.
Features: 

Material: 3D Forged 2014 Alloy body  Faceplate Bolts: 4 x 4mm coated Cr Mo Steel  Steerer Tube Clamp Bolts: 2x 4mm coated Cr Mo Steel offset   Torque Bolt Values: 5 Nm Max on all hardware  Steerer

Height: 42mm  Steerer: 1-1/8"  Faceplate

Width: 42mm  Weight: 121g (110mm) Buy Ritchey Components from Chain Reaction Cycles, the World's Largest Online Bike Store.






...

Ritchey WCS C220 Stem The Ritchey WCS 220 Stem improves  the performance benefits from the Ritchey C260 stem, being lighter, more  durable & easy to install. The WCS 220 is faster & easier to install or remove  thanks to the press-fit handlebar clamp interface which makes fitting to your  bike & attaching your handlebars instant & the forward-facing hardware makes  fine tune adjustments a breeze. Secure & Stable Handlebar Engagement The C220 handlebar clamp design  interface creates a secure & stable handlebar engagement, which increases  handlebar stiffness. The bolt engagements are aligned with the clamp face so  that it holds the handlebar efficiently & avoids handlebar wear by reducing  flexing. This specific clamp design means that the faceplate & stem body can  be lighter & does not sacrifice reliability, strength or stiffness.
Features: 

Material: 3D Forged 2014 Alloy body  Faceplate Bolts: 4 x 4mm coated Cr Mo Steel  Steerer Tube Clamp Bolts: 2x 4mm coated Cr Mo Steel offset   Torque Bolt Values: 5 Nm Max on all hardware  Steerer

Height: 42mm  Steerer: 1-1/8"  Faceplate

Width: 42mm  Weight: 121g (110mm) Buy Ritchey Components from Chain Reaction Cycles, the World's Largest Online Bike Store.






...

Ritchey WCS C220 Stem. You really can have it all—the new wcs c 220 stem rivals the performance of the revolutionary c 260 stem design, but it’s quicker & easier to install & remove thanks to a press-fit handlebar clamp interface & forward-facing hardware First proven on the ritchey trail stem, the c 220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body ‘embraces’ the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate & stem body with no sacrifice in strength or stiffness The stem body is forged 2014 aluminum for further weight reduction. Premium quality crmo steel bolts are used throughout

Features: 4 x 4mm coated Cr Mo steel forward-facing faceplate bolts 2 x 4mm coated Cr Mo steel offset steer tube clamp bolts 5 Nm torque max on all hardware Compatible with all 31.8 bars Press-fit clamp design installs & removes like a standard stem Specifications:

Material: 3d forged 2014 alloy body Angle: 84/6° Steerer

Height: 42mm Steerer: 1-1/8" Faceplate

Width: 42mm Weight: 121g (110mm) Buy  Ritchey Components from Chain Reaction Cycles, the World’s Largest Online Bike Store.







...

Ritchey WCS C220 Stem. You really can have it all—the new wcs c 220 stem rivals the performance of the revolutionary c 260 stem design, but it’s quicker & easier to install & remove thanks to a press-fit handlebar clamp interface & forward-facing hardware First proven on the ritchey trail stem, the c 220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body ‘embraces’ the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate & stem body with no sacrifice in strength or stiffness The stem body is forged 2014 aluminum for further weight reduction. Premium quality crmo steel bolts are used throughout

Features: 4 x 4mm coated Cr Mo steel forward-facing faceplate bolts 2 x 4mm coated Cr Mo steel offset steer tube clamp bolts 5 Nm torque max on all hardware Compatible with all 31.8 bars Press-fit clamp design installs & removes like a standard stem Specifications:

Material: 3d forged 2014 alloy body Angle: 84/6° Steerer

Height: 42mm Steerer: 1-1/8" Faceplate

Width: 42mm Weight: 121g (110mm) Buy  Ritchey Components from Chain Reaction Cycles, the World’s Largest Online Bike Store.







...

Ritchey WCS C220 Stem. You really can have it all—the new wcs c 220 stem rivals the performance of the revolutionary c 260 stem design, but it’s quicker & easier to install & remove thanks to a press-fit handlebar clamp interface & forward-facing hardware First proven on the ritchey trail stem, the c 220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body ‘embraces’ the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate & stem body with no sacrifice in strength or stiffness The stem body is forged 2014 aluminum for further weight reduction. Premium quality crmo steel bolts are used throughout

Features: 4 x 4mm coated Cr Mo steel forward-facing faceplate bolts 2 x 4mm coated Cr Mo steel offset steer tube clamp bolts 5 Nm torque max on all hardware Compatible with all 31.8 bars Press-fit clamp design installs & removes like a standard stem Specifications:

Material: 3d forged 2014 alloy body Angle: 84/6° Steerer

Height: 42mm Steerer: 1-1/8" Faceplate

Width: 42mm Weight: 121g (110mm) Buy  Ritchey Components from Chain Reaction Cycles, the World’s Largest Online Bike Store.







...

Ritchey WCS C260 Stem At 103 grams this is lightest, most advanced alloy stem in the Ritchey line, & possibly the world This revolutionary patented design starts with a bar clamp that wraps a full 260 degrees around the handlebar to distribute clamping stress more evenly through the handlebar, faceplate, hardware & stem body. The steer tube clamp uses three bolts & a curved slot to reduce clamp stress on the steer tube The body is 3D forged from an advanced 7050 aluminum & internally machined for further weight reduction. Premium quality Cr Mo steel bolts are used throughout, but in a smaller T-20 Torx size that shaves a few more grams with no sacrifice in strength or rigidity The resulting CEN-approved stem is 20 grams lighter & even stiffer than our already stiff & lightweight 4 Axis
Features:4 x T-20 faceplate bolts & patented 260 degree bar clamp design reduces weight, increases stiffness & distributes stress more evenly 3 x T-20 steer tube bolts & curved clamp slot reduces weight & steer tube stress 5 Nm torque max on all hardware 30% stiffer than Ritchey’s legendary WCS 4 Axis & 20 grams lighter Fits most road & mountain bars Installs without removal of levers Specifications:
Material: 3D forged & internally machined 7050 alloy body Angle: 84/6 degree Steerer

Height: 42mm Steerer: 1-1/8" Faceplate

Width: 36mm Finish: BB Black Weight: 103g (100mm) Buy  Ritchey Components from Chain Reaction Cycles, the World's Largest Online Bike Store.





...

Ritchey WCS C260 Stem At 103 grams this is lightest, most advanced alloy stem in the Ritchey line, & possibly the world This revolutionary patented design starts with a bar clamp that wraps a full 260 degrees around the handlebar to distribute clamping stress more evenly through the handlebar, faceplate, hardware & stem body. The steer tube clamp uses three bolts & a curved slot to reduce clamp stress on the steer tube The body is 3D forged from an advanced 7050 aluminum & internally machined for further weight reduction. Premium quality Cr Mo steel bolts are used throughout, but in a smaller T-20 Torx size that shaves a few more grams with no sacrifice in strength or rigidity The resulting CEN-approved stem is 20 grams lighter & even stiffer than our already stiff & lightweight 4 Axis
Features:4 x T-20 faceplate bolts & patented 260 degree bar clamp design reduces weight, increases stiffness & distributes stress more evenly 3 x T-20 steer tube bolts & curved clamp slot reduces weight & steer tube stress 5 Nm torque max on all hardware 30% stiffer than Ritchey’s legendary WCS 4 Axis & 20 grams lighter Fits most road & mountain bars Installs without removal of levers Specifications:
Material: 3D forged & internally machined 7050 alloy body Angle: 84/6 degree Steerer

Height: 42mm Steerer: 1-1/8" Faceplate

Width: 36mm Finish: BB Black Weight: 103g (100mm) Buy  Ritchey Components from Chain Reaction Cycles, the World's Largest Online Bike Store.





...

Ritchey WCS C260 Stem At 103 grams this is lightest, most advanced alloy stem in the Ritchey line, & possibly the world This revolutionary patented design starts with a bar clamp that wraps a full 260 degrees around the handlebar to distribute clamping stress more evenly through the handlebar, faceplate, hardware & stem body. The steer tube clamp uses three bolts & a curved slot to reduce clamp stress on the steer tube The body is 3D forged from an advanced 7050 aluminum & internally machined for further weight reduction. Premium quality Cr Mo steel bolts are used throughout, but in a smaller T-20 Torx size that shaves a few more grams with no sacrifice in strength or rigidity The resulting CEN-approved stem is 20 grams lighter & even stiffer than our already stiff & lightweight 4 Axis
Features:4 x T-20 faceplate bolts & patented 260 degree bar clamp design reduces weight, increases stiffness & distributes stress more evenly 3 x T-20 steer tube bolts & curved clamp slot reduces weight & steer tube stress 5 Nm torque max on all hardware 30% stiffer than Ritchey’s legendary WCS 4 Axis & 20 grams lighter Fits most road & mountain bars Installs without removal of levers Specifications:
Material: 3D forged & internally machined 7050 alloy body Angle: 84/6 degree Steerer

Height: 42mm Steerer: 1-1/8" Faceplate

Width: 36mm Finish: BB Black Weight: 103g (100mm) Buy  Ritchey Components from Chain Reaction Cycles, the World's Largest Online Bike Store.





...

Ritchey WCS C260 Stem At 103 grams this is lightest, most advanced alloy stem in the Ritchey line, & possibly the world This revolutionary patented design starts with a bar clamp that wraps a full 260 degrees around the handlebar to distribute clamping stress more evenly through the handlebar, faceplate, hardware & stem body. The steer tube clamp uses three bolts & a curved slot to reduce clamp stress on the steer tube The body is 3D forged from an advanced 7050 aluminum & internally machined for further weight reduction. Premium quality Cr Mo steel bolts are used throughout, but in a smaller T-20 Torx size that shaves a few more grams with no sacrifice in strength or rigidity The resulting CEN-approved stem is 20 grams lighter & even stiffer than our already stiff & lightweight 4 Axis
Features:4 x T-20 faceplate bolts & patented 260 degree bar clamp design reduces weight, increases stiffness & distributes stress more evenly 3 x T-20 steer tube bolts & curved clamp slot reduces weight & steer tube stress 5 Nm torque max on all hardware 30% stiffer than Ritchey’s legendary WCS 4 Axis & 20 grams lighter Fits most road & mountain bars Installs without removal of levers Specifications:
Material: 3D forged & internally machined 7050 alloy body Angle: 84/6 degree Steerer

Height: 42mm Steerer: 1-1/8" Faceplate

Width: 36mm Finish: BB Black Weight: 103g (100mm) Buy  Ritchey Components from Chain Reaction Cycles, the World's Largest Online Bike Store.





...

Ritchey WCS C260 Stem At 103 grams this is lightest, most advanced alloy stem in the Ritchey line, & possibly the world This revolutionary patented design starts with a bar clamp that wraps a full 260 degrees around the handlebar to distribute clamping stress more evenly through the handlebar, faceplate, hardware & stem body. The steer tube clamp uses three bolts & a curved slot to reduce clamp stress on the steer tube The body is 3D forged from an advanced 7050 aluminum & internally machined for further weight reduction. Premium quality Cr Mo steel bolts are used throughout, but in a smaller T-20 Torx size that shaves a few more grams with no sacrifice in strength or rigidity The resulting CEN-approved stem is 20 grams lighter & even stiffer than our already stiff & lightweight 4 Axis
Features:4 x T-20 faceplate bolts & patented 260 degree bar clamp design reduces weight, increases stiffness & distributes stress more evenly 3 x T-20 steer tube bolts & curved clamp slot reduces weight & steer tube stress 5 Nm torque max on all hardware 30% stiffer than Ritchey’s legendary WCS 4 Axis & 20 grams lighter Fits most road & mountain bars Installs without removal of levers Specifications:
Material: 3D forged & internally machined 7050 alloy body Angle: 84/6 degree Steerer

Height: 42mm Steerer: 1-1/8" Faceplate

Width: 36mm Finish: BB Black Weight: 103g (100mm) Buy  Ritchey Components from Chain Reaction Cycles, the World's Largest Online Bike Store.





...