Ritchey WCS Carbon Matrix C220 Stem You really can have it all—the new wcs c 220 stem rivals the performance of the revolutionary c 260 stem design, but it’s quicker & easier to install & remove thanks to a press-fit handlebar clamp interface & forward-facing hardware First proven on the ritchey trail stem, the c 220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body ‘embraces’ the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate & stem body with no sacrifice in strength or stiffness The Carbon Matrix stem body is forged 7075 aluminum with a stiffness-enhancing carbon exoskeleton which makes this 12% stiffer than the WCS alloy C220 stem. Premium quality crmo steel bolts are used throughout

Features: 4 x 4mm coated Cr Mo steel forward-facing faceplate bolts 2 x 4mm coated Cr Mo steel offset steer tube clamp bolts 5 Nm torque max on all hardware Compatible with all 31.8 bars Press-fit clamp design installs & removes like a standard stem Specifications:

Material: 3d forged 7075, carbon encased body Lengths: 70-130mm Angle: 84/6 degree Steerer

Height: 42mm Steerer: 1-1/8" Faceplate

Width: 42mm Finish: Matte UD Carbon Weight:126g (110mm) Buy  Ritchey Components from Chain Reaction Cycles, the World’s Largest Online Bike Store.







...

Ritchey WCS Carbon Matrix C220 Stem You really can have it all—the new wcs c 220 stem rivals the performance of the revolutionary c 260 stem design, but it’s quicker & easier to install & remove thanks to a press-fit handlebar clamp interface & forward-facing hardware First proven on the ritchey trail stem, the c 220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body ‘embraces’ the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate & stem body with no sacrifice in strength or stiffness The Carbon Matrix stem body is forged 7075 aluminum with a stiffness-enhancing carbon exoskeleton which makes this 12% stiffer than the WCS alloy C220 stem. Premium quality crmo steel bolts are used throughout

Features: 4 x 4mm coated Cr Mo steel forward-facing faceplate bolts 2 x 4mm coated Cr Mo steel offset steer tube clamp bolts 5 Nm torque max on all hardware Compatible with all 31.8 bars Press-fit clamp design installs & removes like a standard stem Specifications:

Material: 3d forged 7075, carbon encased body Lengths: 70-130mm Angle: 84/6 degree Steerer

Height: 42mm Steerer: 1-1/8" Faceplate

Width: 42mm Finish: Matte UD Carbon Weight:126g (110mm) Buy  Ritchey Components from Chain Reaction Cycles, the World’s Largest Online Bike Store.







...

Ritchey WCS Carbon Matrix C220 Stem You really can have it all—the new wcs c 220 stem rivals the performance of the revolutionary c 260 stem design, but it’s quicker & easier to install & remove thanks to a press-fit handlebar clamp interface & forward-facing hardware First proven on the ritchey trail stem, the c 220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body ‘embraces’ the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate & stem body with no sacrifice in strength or stiffness The Carbon Matrix stem body is forged 7075 aluminum with a stiffness-enhancing carbon exoskeleton which makes this 12% stiffer than the WCS alloy C220 stem. Premium quality crmo steel bolts are used throughout

Features: 4 x 4mm coated Cr Mo steel forward-facing faceplate bolts 2 x 4mm coated Cr Mo steel offset steer tube clamp bolts 5 Nm torque max on all hardware Compatible with all 31.8 bars Press-fit clamp design installs & removes like a standard stem Specifications:

Material: 3d forged 7075, carbon encased body Lengths: 70-130mm Angle: 84/6 degree Steerer

Height: 42mm Steerer: 1-1/8" Faceplate

Width: 42mm Finish: Matte UD Carbon Weight:126g (110mm) Buy  Ritchey Components from Chain Reaction Cycles, the World’s Largest Online Bike Store.







...

Ritchey WCS Carbon Matrix C220 Stem You really can have it all—the new wcs c 220 stem rivals the performance of the revolutionary c 260 stem design, but it’s quicker & easier to install & remove thanks to a press-fit handlebar clamp interface & forward-facing hardware First proven on the ritchey trail stem, the c 220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body ‘embraces’ the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate & stem body with no sacrifice in strength or stiffness The Carbon Matrix stem body is forged 7075 aluminum with a stiffness-enhancing carbon exoskeleton which makes this 12% stiffer than the WCS alloy C220 stem. Premium quality crmo steel bolts are used throughout

Features: 4 x 4mm coated Cr Mo steel forward-facing faceplate bolts 2 x 4mm coated Cr Mo steel offset steer tube clamp bolts 5 Nm torque max on all hardware Compatible with all 31.8 bars Press-fit clamp design installs & removes like a standard stem Specifications:

Material: 3d forged 7075, carbon encased body Lengths: 70-130mm Angle: 84/6 degree Steerer

Height: 42mm Steerer: 1-1/8" Faceplate

Width: 42mm Finish: Matte UD Carbon Weight:126g (110mm) Buy  Ritchey Components from Chain Reaction Cycles, the World’s Largest Online Bike Store.







...

Ritchey WCS Carbon Matrix C260 Stem This revolutionary patented design starts with a bar clamp that wraps a full 260 degrees around the handlebar to distribute clamping stress more evenly through the handlebar, faceplate, hardware & stem body. The steer tube clamp uses three bolts & a curved slot to reduce clamp stress on the steer tube The body is 3D forged from an advanced 7050 aluminum, internally machined & then enhanced with a Ritchey Matrix structural carbon exoskeleton to enhance stiffness. Premium quality Cr Mo steel bolts are used throughout, but in a smaller T-20 Torx size that shaves a few more grams with no sacrifice in strength or rigidity The resulting CEN-approved stem is 14% stiffer than the WCS Alloy C260

Features: 4 x T-20 faceplate bolts & patented 260 degree bar clamp design reduces weight, increases stiffness & distributes stress more evenly 3 x T-20 steer tube bolts & curved clamp slot reduces weight & steer tube stress 5 Nm torque max on all hardware 14% stiffer than the WCS Alloy C260 Fits most road & mountain bars Installs without removal of levers Specifications:

Material: Revolutionary C260 alloy forging with Ritchey Matrix structural carbon exoskeleton to enhance stiffness. Lengths: 70
- 130mm Angle: 84/6 degree Steerer

Height: 42mm Faceplate

Width: 36mm Steerer: 1-1/8" Finish: Matte UD Carbon Weight: 113g (100mm) Buy  Ritchey Components from Chain Reaction Cycles, the World’s Largest Online Bike Store.








...

1 1/8"
- 1.5". A stunning fork for the speedy cyclocross rider, this disc brake-optimised WCS model by Ritchey has the
...

Ritchey WCS Carbon MTB Disc Fork 1 1/8". Stiff, supportive & stylish, this carbon-made cyclocross fork by Ritchey is a fantastic front-end fixture for taking on the challenges of the CX course. Low in weight but prepared for heavy-duty racing, it combines a pair of hard-wearing legs with a 1 1/8" steerer for unrivalled control & composure when making a beeline for the finish line. Optimised for use with disc brake setups, this World Championship series fork is made to meet the demands of the modern rider.

Features:

Material: Carbon  Steerer: 1 1/8" Fork Rake: 45mm Axle to Crown: 470mm Axle Type: 9x 100mm QR Disc Standard:  Post Mount, maximum 180mm rotor Weight: 615g (approx) Buy  Ritchey Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.



...

. Providing top-notch travel & support as you take on the trails, this hard-riding 29er fork is carbon-made for confidence-instilling adventures. High-Performance, Carbon MTB Fork. A brilliant fork for the venturesome all mountain rider, this World Championship Series model is a big & bold addition to your fearless front-end. Designed with the modern MTBer in mind, it comes disc brake-optimised, enhancing control & composure over every run. At 470mm from axle to crown, it gives plenty of height for soaking up the impacts of rowdy riding & is the perfect replacement or upgrade for 100mm travel forks. Stiff & responsive, this fork is terrific over an array of terrains.

Features:

Material: Carbon Monocoque Steerer Diameter: 1 1/8" Fork Rake: 45mm Axle to Crown: 470mm Axle Type: 9x 100mm QR axle Disc Standard: Post Mount Maximum Rotor

Size: 180mm Weight: 615g Buy Ritchey Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.





...

. Stiff & responsive for making the most of every exhilarating cross country run, this carbon-construction flat bar by Ritchey adds a versatile approach to your steering setup. Featuring a positive & negative 5mm rise, it can be mounted as high or low as you like as you seek your optimal riding spot, while the backsweep & upsweep allow for brilliant manoeuvrability. Finished with a matte UD carbon for enhanced durability, this WCS model is a top-performing, trail-taming Ritchey bar.

Features:

Material: Carbon Monocoque

Width: 710mm Backsweep: 9° Upsweep: 5° Rise: +/-5mm Finish: Matte Unidirectional Carbon Weight: 183g Buy Ritchey Components from Chain Reaction Cycles, the World's Largest Online Bike Store.





...

. A classic drop bar design with a modern feel, this WCS effort pays homage to the World Champion riders who have steered Ritchey bars to victory. Featuring a shorter reach & shallower drop for enhanced control & streamlined positioning, the Neo Classic is also equipped with aero bar compatibility, allowing you to literally go flat-out in search of the podium. Made from a lightweight & highly-durable carbon, its main purpose is to shave vital seconds & guide you to glory, just like the pros.

Features:

Material: Carbon Fibre Drop: 128mm Reach: 73mm Finish: Unidirectional Matte Carbon Weight: 260g (approx) Buy  Ritchey Components from Chain Reaction Cycles, the World's Largest Online Bike Store.



...