Seal Skinz Womens Winter Cycle Gloves These rugged, technical gloves are designed & engineered for riding in cold & wet conditions.

Features: Totally waterproof, breathable & windproof Soft, durable synthetic palm with gel padding for increased grip & comfort Added insulation & extended stretch cuffs for additional warmth

Material: 66% Nylon 19% PU 15% Spandex Buy  Seal Skinz from Chain Reaction Cycles, the World's Largest Online Bike Store.



...

Sea Sucker 20mm Fork Mount If you’re riding a bike with a through axle on the front, you have two options for mounting to a Sea Sucker rack: use a Fork Up adapter, or use the new dedicated 15mm or 20mm fork mounts. These fork mounts are bolt on, meant for people who are always using their rack with their thru axle bike According to Sea Suckers MTB pro Macky Franklin: “ So much steadier than using the adaptor ” To attach, unbolt the existing fork mount (you’ll need an adjustable or 7/16″ wrench & a 5/32 hex wrench). Place the new fork mount in position & bolt on using the same hardware you just removed from the original fork mount Buy Sea Sucker Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store. ...

Sea Sucker Add-On Front Wheel Holder Made to fit our Bomber & Mini Bomber bike racks – just swap the Wheel Mount for one of the fork mounts, & now your front wheel doesn’t have to ride in the trunk anymore Elongated entry slots for your skewer allow your wheel to rest on the platform of the rack, providing additional stability when driving.

Features: Fits up to 29″ wheels. Made from 1/4″ powder-coated aluminum. NOTE – this product does not work with through-axle wheels Buy Sea Sucker Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.

...

. Finally, a roof-top rack that’s easy to install & won’t damage your car! Sea Sucker bike racks use the incredibly strong vacuum mounts & allow you to temporarily but securely mount your bikes to the roof of your car without the hassle of permanently attaching any hardware Sea Suckers are non-marking, UV & weather resistant, & hold exceptionally well to glass or metal surfaces This model

Includes:: three Rear Wheel Straps (6″ Sea Suckers with 1 1/2″ wide hook-&-loop straps) to secure your bikes’ rear wheels & keep the tail from sliding left or right This rack has three fork clamps attached to five 6″ Sea Suckers. Rack body made from 3/4″ high-density polyethelyne, which makes it strong enough to hold your bikes yet flexible enough to follow the curve of your roof line. Approximate footprint: 41″ x 10″ Comes with Delta Bike Hitch Pro fork mounts, which are lockable & heavy-duty. Also, it opens wide enough when you release the lever that you don’t have to tighten or loosen the acorn nut on the opposite side every time you put your bike in or take your bike out of the mount Specifications: Holds 3 bicycles – up to 45lbs each. Made for roof top, trunk or hatchback attachment. Attaches to metal, glass or fiberglass surfaces. 3/4” thick high-density polyethylene (HDPE) body for strength & durability. Three heavy-duty fork mounts for 9mm dropouts. Five 6″ Sea Sucker vacuum cups on body (210lb. pull-strength rated each). Approx. 40” x 10” footprint. Approx. 18lbs. What’s in the box: Bomber 3-bike rack Three Rear Wheel Straps. 5g Lube Tube for vacuum pump maintenance. Spare Sea Sucker vacuum pad & pump (Spare Tyre). Buy Sea Sucker Bomber Bike Rack from Chain Reaction Cycles, the World's Largest Online Bike Store.

...

. Sometimes the standard 6″ Rear Wheel Strap that’s provided with the Talon, Mini Bomber or Bomber doesn’t fit in the space available, & so here's the smaller 4 1/2″ Sea Sucker vacuum pad

Features: Comes with 1 1/2″ wide hook-&-loop strap to secure your bike’s rear wheel 4 1/2″ vacuum pad spreads out to approx. 4 3/4″ when mounted Buy Sea Sucker Compact Rear Wheel Strap from Chain Reaction Cycles, the World's Largest Online Bike Store.

...

. For sturdy mounting without the hassle of drilling, screwing or making modifications to your vehicle, the Sea Sucker Falcon Fork Mount Bi is the essential carrier. The two large suction-cup style vacuum mounts do all the work in holding your bike in place & keeping it there. Made with pick-up trucks in mind, the Falcon Fork Mount will bond to metal, glass & fibreglass surfaces & will hold bikes up to 20kg.   Durable & Innovative Carrier.   The heavy-duty 9mm fork mount keeps your bike locked in position & secure as the 6", 210lb pull-strength rated vacuum cups & 1/2" thick body take all of the strain. Installation & removal could not be easier & all without making a mark on your car or truck.  
Features:   Body

Material: High-Density Polyethene (HDPE)   Load Capacity: 20kg  

Size: 33 x 15.5 cm   Weight: 1.8kg     Buy  Sea Sucker Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.




...

Sea Sucker Flight Deck The Flight Deck turns your regular old Rear Wheel Strap into a front-wheel holding superstar. It can be used with the Talon, Mini Bomber or Bomber & uses your existing Rear Wheel Strap as part of the package, so some assembly is required. The front wheel mount features elongated entry slots for your skewer, which allows your wheel to rest on the platform of the rack, providing additional stability when driving. The 1/4″ aluminum front wheel mount fits up to a 29″ wheel & sits on a black HDPE platform. The platform, when combined with your existing Rear Wheel Strap, is held in place with two powerful 6″ Sea Sucker vacuum cups. Approx. 13″x 6″ footprint.NOTE – the Front Wheel Holder does not work with through-axle wheels.

Features: Elongated entry slots for your skewer Approx. 13″x 6″ footprint Fits up tp 29" wheel Buy Sea Sucker Flight Deck from Chain Reaction Cycles, the World's Largest Online Bike Store.

...

. If you’re riding a bike with a through axle on the front, you have two options for mounting to a Sea Sucker rack: use a Fork Up adapter, or use these new dedicated fork mounts. These fork mounts are bolt on, meant for people who are always using their rack with their thru axle bike According to Sea Suckers MTB pro Macky Franklin: “ So much steadier than using the adaptor ” To attach, unbolt the existing fork mount (you’ll need an adjustable or 7/16″ wrench & a 5/32 hex wrench). Place the new fork mount in position & bolt on using the same hardware you just removed from the original fork mount Buy Sea Sucker Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store. ...

. If you’re riding a bike with a through axle on the front, you have two options for mounting to a Sea Sucker rack: use a Fork Up adapter, or use these new dedicated fork mounts. These fork mounts are bolt on, meant for people who are always using their rack with their thru axle bike According to Sea Suckers MTB pro Macky Franklin: “ So much steadier than using the adaptor ” To attach, unbolt the existing fork mount (you’ll need an adjustable or 7/16″ wrench & a 5/32 hex wrench). Place the new fork mount in position & bolt on using the same hardware you just removed from the original fork mount Buy Sea Sucker Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store. ...

. The new Hornet 1-bike rack is a small-scale revolution. Billed as the “ Smallest Bike Rack in the World”, the Hornet is so compact that it fits into an included 9.5”x 7”x 3” zippered carrying case for easy storage & travel The Hornet is far & away the most travel-friendly rack on the market, but it works equally well for everyday use The Hornet is Sea Suckers first “leave-the-front-wheel-on” bike rack. It is designed to mount to the back window of any hatchback, SUV or minivan using two of Sea Sucker’s powerful 4 ½” vacuum cups (120lb. rated pull-strength each) to hold the handlebars & hang a bike weighing not more than 35lbs from the rear glass. Plastic ladder straps securely hold both road & MTB bars to the vacuum cups & make attaching & removing the bike a breeze As with all Sea Sucker bike racks, the pump-action vacuum cups also allow the user to attach the rack in just seconds, making the Hornet one of the easiest & fastest racks to install. Simply pump the two vacuum cups onto the back windshield, close the ladder straps around the bars & you’re done. & when it comes time to remove it, the Hornet detaches just as quickly & breaks back down into its component parts for storage in its case The Hornet also comes with a safety strap that loops around the bike’s steer tube & into a sewn in cam buckle. The strap’s tail has a built in plastic peg that, when closed in the hatchback, secures the strap to the car.

Features: Mounts to the back window of any hatchback 4 ½”pump action vacuum cups (120lb. rated pull-strength each) Max bike weight: 35lb Plastic ladder straps 9.5”x 7”x 3” zippered carrying case Buy Sea Sucker Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.

...