. For sturdy mounting without the hassle of drilling, screwing or making modifications to your vehicle, the Sea Sucker Falcon Fork Mount Bi is the essential carrier. The two large suction-cup style vacuum mounts do all the work in holding your bike in place & keeping it there. Made with pick-up trucks in mind, the Falcon Fork Mount will bond to metal, glass & fibreglass surfaces & will hold bikes up to 20kg.   Durable & Innovative Carrier.   The heavy-duty 9mm fork mount keeps your bike locked in position & secure as the 6", 210lb pull-strength rated vacuum cups & 1/2" thick body take all of the strain. Installation & removal could not be easier & all without making a mark on your car or truck.  
Features:   Body

Material: High-Density Polyethene (HDPE)   Load Capacity: 20kg  

Size: 33 x 15.5 cm   Weight: 1.8kg     Buy  Sea Sucker Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.




...

Sea Sucker Flight Deck The Flight Deck turns your regular old Rear Wheel Strap into a front-wheel holding superstar. It can be used with the Talon, Mini Bomber or Bomber & uses your existing Rear Wheel Strap as part of the package, so some assembly is required. The front wheel mount features elongated entry slots for your skewer, which allows your wheel to rest on the platform of the rack, providing additional stability when driving. The 1/4″ aluminum front wheel mount fits up to a 29″ wheel & sits on a black HDPE platform. The platform, when combined with your existing Rear Wheel Strap, is held in place with two powerful 6″ Sea Sucker vacuum cups. Approx. 13″x 6″ footprint.NOTE – the Front Wheel Holder does not work with through-axle wheels.

Features: Elongated entry slots for your skewer Approx. 13″x 6″ footprint Fits up tp 29" wheel Buy Sea Sucker Flight Deck from Chain Reaction Cycles, the World's Largest Online Bike Store.

...

. If you’re riding a bike with a through axle on the front, you have two options for mounting to a Sea Sucker rack: use a Fork Up adapter, or use these new dedicated fork mounts. These fork mounts are bolt on, meant for people who are always using their rack with their thru axle bike According to Sea Suckers MTB pro Macky Franklin: “ So much steadier than using the adaptor ” To attach, unbolt the existing fork mount (you’ll need an adjustable or 7/16″ wrench & a 5/32 hex wrench). Place the new fork mount in position & bolt on using the same hardware you just removed from the original fork mount Buy Sea Sucker Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store. ...

. If you’re riding a bike with a through axle on the front, you have two options for mounting to a Sea Sucker rack: use a Fork Up adapter, or use these new dedicated fork mounts. These fork mounts are bolt on, meant for people who are always using their rack with their thru axle bike According to Sea Suckers MTB pro Macky Franklin: “ So much steadier than using the adaptor ” To attach, unbolt the existing fork mount (you’ll need an adjustable or 7/16″ wrench & a 5/32 hex wrench). Place the new fork mount in position & bolt on using the same hardware you just removed from the original fork mount Buy Sea Sucker Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store. ...

. The new Hornet 1-bike rack is a small-scale revolution. Billed as the “ Smallest Bike Rack in the World”, the Hornet is so compact that it fits into an included 9.5”x 7”x 3” zippered carrying case for easy storage & travel The Hornet is far & away the most travel-friendly rack on the market, but it works equally well for everyday use The Hornet is Sea Suckers first “leave-the-front-wheel-on” bike rack. It is designed to mount to the back window of any hatchback, SUV or minivan using two of Sea Sucker’s powerful 4 ½” vacuum cups (120lb. rated pull-strength each) to hold the handlebars & hang a bike weighing not more than 35lbs from the rear glass. Plastic ladder straps securely hold both road & MTB bars to the vacuum cups & make attaching & removing the bike a breeze As with all Sea Sucker bike racks, the pump-action vacuum cups also allow the user to attach the rack in just seconds, making the Hornet one of the easiest & fastest racks to install. Simply pump the two vacuum cups onto the back windshield, close the ladder straps around the bars & you’re done. & when it comes time to remove it, the Hornet detaches just as quickly & breaks back down into its component parts for storage in its case The Hornet also comes with a safety strap that loops around the bike’s steer tube & into a sewn in cam buckle. The strap’s tail has a built in plastic peg that, when closed in the hatchback, secures the strap to the car.

Features: Mounts to the back window of any hatchback 4 ½”pump action vacuum cups (120lb. rated pull-strength each) Max bike weight: 35lb Plastic ladder straps 9.5”x 7”x 3” zippered carrying case Buy Sea Sucker Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.

...

. The Mini Bomber is Sea Suckers newest & probably most versatile model. Two-bike fork-mount rack designed to attach to your car’s roof or trunk, or your SUV’s back glass. Plastic body flexes to conform to your car’s curves. Four 6” Sea Sucker vacuum mounts give this rack plenty of muscle.

Includes:: two 6” Rear Wheel Straps. ¾” black HDPE body for strength & durability. 23”x 9” footprint. Comes with Delta Bike Hitch Pro fork mounts, which are lockable & heavy-duty. Also, it opens wide enough when you release the lever that you don’t have to tighten or loosen the acorn nut on the opposite side every time you put your bike in or take your bike out of the mount.

Features: Holds 2 bicycles – up to 45lbs each Made for roof top, trunk or hatchback attachment Attaches to metal, glass or fibreglass surfaces 3/4” thick high-density polyethylene (HDPE) body for strength & durability Two heavy-duty fork mounts for 9mm dropouts Four 6″ Sea Sucker vacuum cups on body (210lb. pull-strength rated each) Approx. 27” x 8” footprint Approx. 12lbs Mini Bomber 2-bike rack Two Rear Wheel Straps. 5g Lube Tube for vacuum pump maintenance. Spare Sea Sucker vacuum pad & pump (Spare Tyre). Buy Sea Sucker Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.



...

Sea Sucker Rear Wheel Strap A single 6″ Sea Sucker with a 1 1/2″ wide hook-&-loop strap to secure your bike’s rear wheel & keep the tail from sliding left or right   NOTE: this item comes standard with the Talon, Mini Bomber & Bomber bike racks – it does not need to be ordered separately Buy Sea Sucker Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store. ...

Sea Sucker Side Loader Wheel Mount Tired of throwing your front wheels in the trunk? Annoyed about cleaning your tyre’s mud off the back seat on the way home from an epic ride? Mount the Side Loader onto your roof, trunk, door, or wherever & breathe deep the heady smell of awesome. Made for standard road, cross & MTB wheels – 15mm & 20mm through-axle wheels are not invited to this party until Sea Sucker can come up with an adapter for them. Sorry! Buy Sea Sucker Side Loader Wheel Mount from Chain Reaction Cycles, the World's Largest Online Bike Store. ...

Sea Sucker Talon 15mm Bike Rack Finally, a bike carrier that’s easy to install & won’t damage your car! Sea Sucker bike racks use our incredibly strong vacuum mounts & allow you to temporarily but securely mount your bike to the roof of your car without the hassle of permanently attaching any hardware. Sea Suckers are non-marking, UV & weather resistant, & hold exceptionally well to glass or metal surfaces.
Includes: one Rear Wheel Strap (6″ Sea Sucker with hook-&-loop straps) to secure your bike’s rear wheel & keep the tail from sliding left or right. This rack has one fork clamp attached to three 6″ Sea Suckers. Rack body made from 1/2″ HDPE, which makes it strong enough to hold your bike yet flexible enough to follow the curve of your roof line. Designed to mount to your roof & front windshield, but can be used just about anywhere – on the roof, on the trunk, etc. Approximate

Size: 15″ x 12″. Comes with the Delta Bike Hitch Pro fork mount, which is lockable & h


...

. Finally, a bike carrier that’s easy to install & won’t damage your car! Sea Sucker bike racks use our incredibly strong vacuum mounts & allow you to temporarily but securely mount your bike to the roof of your car without the hassle of permanently attaching any hardware Sea Suckers are non-marking, UV & weather resistant, & hold exceptionally well to glass or metal surfaces

Includes:: one Rear Wheel Strap (6″ Sea Sucker with hook-&-loop straps) to secure your bike’s rear wheel & keep the tail from sliding left or right This rack has one fork clamp attached to three 6″ Sea Suckers. Rack body made from 1/2″ HDPE, which makes it strong enough to hold your bike yet flexible enough to follow the curve of your roof line. Designed to mount to your roof & front windshield, but can be used just about anywhere – on the roof, on the trunk, etc. Approximate

Size: 15″ x 12″ Comes with the Delta Bike Hitch Pro fork mount, which is lockable & heavy-duty. Also, it opens wide enough when you release the lever that you don’t have to tighten or loosen the acorn nut on the opposite side every time you put your bike in or take your bike out of the mount Some assembly may be required. Tools needed: 5/32″ Allen/hex wrench & 7/16″ (or adjustable) wrench

Features: Holds 1 bicycle – up to 45lbs Made for roof top, trunk or hatchback attachment Attaches to metal, glass or fibreglass surfaces 1/2” thick high-density polyethylene (HDPE) body for strength & durability One heavy-duty fork mount for 9mm dropouts Three 6″ Sea Sucker vacuum cups on body (210lb. pull-strength rated each) Approx. 15” x 13” footprint Approx. 6lbs Talon 1-bike rack with Huske mount Rear Wheel Strap 5g Lube Tube for vacuum pump maintenance Spare Sea Sucker vacuum pad & pump (Spare Tyre) Buy Sea Sucker Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.





...