. The Mini Bomber is Sea Suckers newest & probably most versatile model. Two-bike fork-mount rack designed to attach to your car’s roof or trunk, or your SUV’s back glass. Plastic body flexes to conform to your car’s curves. Four 6” Sea Sucker vacuum mounts give this rack plenty of muscle.

Includes:: two 6” Rear Wheel Straps. ¾” black HDPE body for strength & durability. 23”x 9” footprint. Comes with Delta Bike Hitch Pro fork mounts, which are lockable & heavy-duty. Also, it opens wide enough when you release the lever that you don’t have to tighten or loosen the acorn nut on the opposite side every time you put your bike in or take your bike out of the mount.

Features: Holds 2 bicycles – up to 45lbs each Made for roof top, trunk or hatchback attachment Attaches to metal, glass or fibreglass surfaces 3/4” thick high-density polyethylene (HDPE) body for strength & durability Two heavy-duty fork mounts for 9mm dropouts Four 6″ Sea Sucker vacuum cups on body (210lb. pull-strength rated each) Approx. 27” x 8” footprint Approx. 12lbs Mini Bomber 2-bike rack Two Rear Wheel Straps. 5g Lube Tube for vacuum pump maintenance. Spare Sea Sucker vacuum pad & pump (Spare Tyre). Buy Sea Sucker Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.



...

Sea Sucker Rear Wheel Strap A single 6″ Sea Sucker with a 1 1/2″ wide hook-&-loop strap to secure your bike’s rear wheel & keep the tail from sliding left or right   NOTE: this item comes standard with the Talon, Mini Bomber & Bomber bike racks – it does not need to be ordered separately Buy Sea Sucker Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store. ...

Sea Sucker Side Loader Wheel Mount Tired of throwing your front wheels in the trunk? Annoyed about cleaning your tyre’s mud off the back seat on the way home from an epic ride? Mount the Side Loader onto your roof, trunk, door, or wherever & breathe deep the heady smell of awesome. Made for standard road, cross & MTB wheels – 15mm & 20mm through-axle wheels are not invited to this party until Sea Sucker can come up with an adapter for them. Sorry! Buy Sea Sucker Side Loader Wheel Mount from Chain Reaction Cycles, the World's Largest Online Bike Store. ...

Sea Sucker Talon 15mm Bike Rack Finally, a bike carrier that’s easy to install & won’t damage your car! Sea Sucker bike racks use our incredibly strong vacuum mounts & allow you to temporarily but securely mount your bike to the roof of your car without the hassle of permanently attaching any hardware. Sea Suckers are non-marking, UV & weather resistant, & hold exceptionally well to glass or metal surfaces.
Includes: one Rear Wheel Strap (6″ Sea Sucker with hook-&-loop straps) to secure your bike’s rear wheel & keep the tail from sliding left or right. This rack has one fork clamp attached to three 6″ Sea Suckers. Rack body made from 1/2″ HDPE, which makes it strong enough to hold your bike yet flexible enough to follow the curve of your roof line. Designed to mount to your roof & front windshield, but can be used just about anywhere – on the roof, on the trunk, etc. Approximate

Size: 15″ x 12″. Comes with the Delta Bike Hitch Pro fork mount, which is lockable & h


...

. Finally, a bike carrier that’s easy to install & won’t damage your car! Sea Sucker bike racks use our incredibly strong vacuum mounts & allow you to temporarily but securely mount your bike to the roof of your car without the hassle of permanently attaching any hardware Sea Suckers are non-marking, UV & weather resistant, & hold exceptionally well to glass or metal surfaces

Includes:: one Rear Wheel Strap (6″ Sea Sucker with hook-&-loop straps) to secure your bike’s rear wheel & keep the tail from sliding left or right This rack has one fork clamp attached to three 6″ Sea Suckers. Rack body made from 1/2″ HDPE, which makes it strong enough to hold your bike yet flexible enough to follow the curve of your roof line. Designed to mount to your roof & front windshield, but can be used just about anywhere – on the roof, on the trunk, etc. Approximate

Size: 15″ x 12″ Comes with the Delta Bike Hitch Pro fork mount, which is lockable & heavy-duty. Also, it opens wide enough when you release the lever that you don’t have to tighten or loosen the acorn nut on the opposite side every time you put your bike in or take your bike out of the mount Some assembly may be required. Tools needed: 5/32″ Allen/hex wrench & 7/16″ (or adjustable) wrench

Features: Holds 1 bicycle – up to 45lbs Made for roof top, trunk or hatchback attachment Attaches to metal, glass or fibreglass surfaces 1/2” thick high-density polyethylene (HDPE) body for strength & durability One heavy-duty fork mount for 9mm dropouts Three 6″ Sea Sucker vacuum cups on body (210lb. pull-strength rated each) Approx. 15” x 13” footprint Approx. 6lbs Talon 1-bike rack with Huske mount Rear Wheel Strap 5g Lube Tube for vacuum pump maintenance Spare Sea Sucker vacuum pad & pump (Spare Tyre) Buy Sea Sucker Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.





...

Seatylock Foldylock Compact Bike Lock This compact bike lock is durable, lightweight & convenient. It features reliable folding hardened steel links & a strong locking mechanism for robust security when you need it as well as compact storage when riding from A to B. Coated in hard-wearing plastic to protect it from corrosion & rust, this model also eliminates the chance of it damaging your bikes paintwork. Its locking cylinder is reinforced to restrict drilling & picking, while its rivets are protected from cutting or sawing.

Features:

Material: Chain: Hardened Steel; Link Coating: Reinforced Plastic Folded Dimensions: Length: 18.9cm;

Width: 6cm;

Depth: 4.1cm Circumference: 85cm Included: Supplied with a frame mount Weight: 1kg Buy Seatylock Bike Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.







...

Sector 7i Carbon Front MTB Rim Engineered for the toughest off-road rides, this front MTB rim features a robust carbon fibre construction. This makes it incredibly robust as you weave between the trails at speed, as it handles all the knocks & bumps associated with all-day epics with ease. Sector has equipped this model with their ground-breaking Innegra Technology, which is added to the carbon layup & significantly enhances its strength & compliance as well as reduces its weight. When using this rim it is like having an extra shield of armour protecting it from the biggest of hits on your mountain bike adventures. Redefining Carbon Wheels Ride without fear
- thanks to the addition of Te Xtreme Innegra into the layup of Sector's rims, they've developed a rim that has 75% higher impact resistance than standard Carbon Rims of the same profile. The 7i Rims are significantly more resistant to wear & tear & less prone to catastrophic failure. Sector's Innegra equipped 7i Rims also have 50% more vertical compliance than standard Carbon Rim. As a result they exhibit high energy absorption & superior vibration damping, with none of harsh stiffness associated with Carbon. These are Carbon Rims that have the sought-after ride characteristic of a premium alloy Wheelset. Durable Doesn't Have to Mean Heavy At just 398g each, 7i is a lightweight, reactive & durable 650b Rim that can handle a beating. Now you can forget about protecting your rims & concentrate on finding your flow in challenging trail conditions. Please Note: These Rims are front & rear specific. Due to different spoke bracing angles of front & rear wheels, the drilling angle differs between front & rear rims. If buying a set please order one front & one rear rim.

Features: Rim

Material: T-700 Unidirectional Carbon Fibre, Outer layer: Te Xtreme Plain Weave Spread Tow Carbon Fibre & Innegra S Hybrid Use: MTB Rim

Size: 27.5" Holes: 32h Rim

Width: (Internal) 29mm; (External) 35mm Rim

Depth: 25mm ERD: 559mm Tubeless: Yes Single or Pair: Single Weight: 398g Buy Sector Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.










...

Sector 9i Carbon Front MTB Rim Ready for shredding the trails with your friends as well as exploring new off-road routes on your own, this carbon MTB rim is engineered for maximum performance. It features a hard-wearing unidirectional carbon fibre rim construction, which means that you can benefit from its fantastic strength without adding any unnecessary weight to your ride. Sector has taken this model's design a step further by also integrating Te Xtreme Innegra into the layup of the rims. This gives it 75% more impact resistance than standard carbon rims of the same profile. The 9i MTB rim is significantly more resistant to wear & tear & less prone to catastrophic failure. So what is Innegra? Innegra is a fibre derived from polypropylene that exhibits some highly beneficial properties, including high strength-to-weight ratio, resistance to damage, vibration damping & energy dissipation. The Tex Treme fabric used in the layup of 9i rim is a Spread Tow fabric built from a hybrid of Innegra & T700 carbon fibres. The Spread Tow layout is significant because it also contributes some positive attributes
- the fibres are straighter (reduced crimp therefore higher strength) & it facilitates the use of less resin (lower weight). In the 9i rim the Spread Tow fabric is used on the outer layer of the rim, giving it the unique checkerboard pattern. Sounds good, but what does that mean for a rim? Significantly more compliance... Under a lab test the 9i rim was 50% more vertically compliant than a unidirectional T700 carbon rim of the same profile. This test involves loading the rim with a 100kg weight, in which the 9i rim exhibited a deflection of 15.74mm compared to 10.55mm on the standard T700 rim. It is widely acknowledged that vertical compliance is important for damage reduction (less likely to crack), a reduction of fatigue & to improve traction. Such an improvement in vertical compliance also brings a radically enhanced ride quality to the 9i wheelset. The Innegra equipped rims do not have the associated harsh stiffness of regular carbon wheels. Significantly more impact resistance... In the lab the 9i rim was able to handle impacts of almost double the standard required for MTB wheels by the UCI. The 9i rim withstood an impact of 140J compared the UCI stipulated requirement of an 80J impact, making it 75% stronger than the UCI requirements. In real world terms, the 9i rim can handle the equivalent of dropping a 15kg weight from a height of up to 1.08 metres onto the bare rim, thus making it 18% stronger than a recognised leading competitor who has published their data. Much less weight... Despite offering strength & compliance advantages, the use of Innegra also allows the construction of an extremely lightweight rim. The Innegra equipped 9i rim weighs just 428g (29”).
Features: Rim

Material: T-700 Unidirectional Carbon Fibre; Outer layer: Te Xtreme Plain Weave Spread Tow Carbon Fibre & Innegra S Hybrid Use: MTB Rim

Size: 29" Holes: 28h or 32h options Rim

Width: (Internal) 29mm; (External) 35mm Rim

Depth: 25mm ERD: 591mm Tubeless: Yes Single or Pair: Single Weight: 428g Buy Sector Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.









...

Sector 9i Carbon Front MTB Rim Ready for shredding the trails with your friends as well as exploring new off-road routes on your own, this carbon MTB rim is engineered for maximum performance. It features a hard-wearing unidirectional carbon fibre rim construction, which means that you can benefit from its fantastic strength without adding any unnecessary weight to your ride. Sector has taken this model's design a step further by also integrating Te Xtreme Innegra into the layup of the rims. This gives it 75% more impact resistance than standard carbon rims of the same profile. The 9i MTB rim is significantly more resistant to wear & tear & less prone to catastrophic failure. So what is Innegra? Innegra is a fibre derived from polypropylene that exhibits some highly beneficial properties, including high strength-to-weight ratio, resistance to damage, vibration damping & energy dissipation. The Tex Treme fabric used in the layup of 9i rim is a Spread Tow fabric built from a hybrid of Innegra & T700 carbon fibres. The Spread Tow layout is significant because it also contributes some positive attributes
- the fibres are straighter (reduced crimp therefore higher strength) & it facilitates the use of less resin (lower weight). In the 9i rim the Spread Tow fabric is used on the outer layer of the rim, giving it the unique checkerboard pattern. Sounds good, but what does that mean for a rim? Significantly more compliance... Under a lab test the 9i rim was 50% more vertically compliant than a unidirectional T700 carbon rim of the same profile. This test involves loading the rim with a 100kg weight, in which the 9i rim exhibited a deflection of 15.74mm compared to 10.55mm on the standard T700 rim. It is widely acknowledged that vertical compliance is important for damage reduction (less likely to crack), a reduction of fatigue & to improve traction. Such an improvement in vertical compliance also brings a radically enhanced ride quality to the 9i wheelset. The Innegra equipped rims do not have the associated harsh stiffness of regular carbon wheels. Significantly more impact resistance... In the lab the 9i rim was able to handle impacts of almost double the standard required for MTB wheels by the UCI. The 9i rim withstood an impact of 140J compared the UCI stipulated requirement of an 80J impact, making it 75% stronger than the UCI requirements. In real world terms, the 9i rim can handle the equivalent of dropping a 15kg weight from a height of up to 1.08 metres onto the bare rim, thus making it 18% stronger than a recognised leading competitor who has published their data. Much less weight... Despite offering strength & compliance advantages, the use of Innegra also allows the construction of an extremely lightweight rim. The Innegra equipped 9i rim weighs just 428g (29”).
Features: Rim

Material: T-700 Unidirectional Carbon Fibre; Outer layer: Te Xtreme Plain Weave Spread Tow Carbon Fibre & Innegra S Hybrid Use: MTB Rim

Size: 29" Holes: 28h or 32h options Rim

Width: (Internal) 29mm; (External) 35mm Rim

Depth: 25mm ERD: 591mm Tubeless: Yes Single or Pair: Single Weight: 428g Buy Sector Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.









...

Sector 9i Carbon MTB Wheelset Designed for shredding the trails with your friends & exploring new off-road routes on your own, this carbon MTB wheelset is engineered for maximum performance. It features a hard-wearing unidirectional carbon fibre rim construction, which means that you can benefit from its fantastic strength without adding any unnecessary weight to your ride. Sector has taken this model's design a step further by also integrating Te Xtreme Innegra into the layup of the rims. This gives it 75% more impact resistance than standard carbon rims of the same profile. The 9i MTB wheels are significantly more resistant to wear & tear & less prone to catastrophic failure. So what is Innegra? Innegra is a fibre derived from polypropylene that exhibits some highly beneficial properties, including high strength-to-weight ratio, resistance to damage, vibration damping & energy dissipation. The Tex Treme fabric used in the layup of 9i rim is a Spread Tow fabric built from a hybrid of Innegra & T700 carbon fibres. The Spread Tow layout is significant because it also contributes some positive attributes
- the fibres are straighter (reduced crimp therefore higher strength) & it facilitates the use of less resin (lower weight). In the 9i rim the Spread Tow fabric is used on the outer layer of the rim, giving it the unique checkerboard pattern. Sounds good, but what does that mean for a rim? Significantly more compliance... Under a lab test the 9i rim was 50% more vertically compliant than a unidirectional T700 carbon rim of the same profile. This test involves loading the rim with a 100kg weight, in which the 9i rim exhibited a deflection of 15.74mm compared to 10.55mm on the standard T700 rim. It is widely acknowledged that vertical compliance is important for damage reduction (less likely to crack), a reduction of fatigue & to improve traction. Such an improvement in vertical compliance also brings a radically enhanced ride quality to the 9i wheelset. The Innegra equipped rims do not have the associated harsh stiffness of regular carbon wheels. Significantly more impact resistance... In the lab the 9i rim was able to handle impacts of almost double the standard required for MTB wheels by the UCI. The 9i rim withstood an impact of 140J compared the UCI stipulated requirement of an 80J impact, making it 75% stronger than the UCI requirements. In real world terms, the 9i rim can handle the equivalent of dropping a 15kg weight from a height of up to 1.08 metres onto the bare rim, thus making it 18% stronger than a recognised leading competitor who has published their data. Much less weight... Despite offering strength & compliance advantages, the use of Innegra also allows the construction of an extremely lightweight rim. The Innegra equipped 9i rim weighs just 428g (29”), & the complete wheelset weighs just 1690g. What about the rest of the wheel? Every detail of Sector's wheel builds is carefully considered, from the super smooth Revo Cream bearings to the straight pull triple butted Pillar spokes.
Features: Rim

Material: T-700 Unidirectional Carbon Fibre; Outer layer: Te Xtreme Plain Weave Spread Tow Carbon Fibre & Innegra S Hybrid Wheel

Size: 29" Use: MTB Spokes / Type: Pillar 2016 TB / Straight Pull Nipples: Pillar Black Brass DSN Hub Rotor Fitment: Centrelock Freehub: 6 Pawl (Shimano or SRAM XD options available to select) Hole Count: 28h ERD: 591mm Rim

Width: (Internal) 29mm (External) 35mm Rim

Depth: 25mm Tubeless: Yes Single or Pair: Pair End Caps: (Front) 110x 15mm / (Rear) 148x 12mm Extras: Tubeless Sealant, Valves & Tape Weight: 1650g Buy Sector Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.









...