Sector 9i Carbon Rear MTB Rim Perfect for shredding the trails with your friends as well as exploring new off-road routes on your own, this carbon MTB rim is engineered for maximum performance. It features a hard-wearing unidirectional carbon fibre rim construction, which means that you can benefit from its fantastic strength without adding any unnecessary weight to your ride. Sector has taken this model's design a step further by also integrating Te Xtreme Innegra into the layup of the rims. This gives it 75% more impact resistance than standard carbon rims of the same profile. The 9i MTB rim is significantly more resistant to wear & tear & less prone to catastrophic failure. So what is Innegra? Innegra is a fibre derived from polypropylene that exhibits some highly beneficial properties, including high strength-to-weight ratio, resistance to damage, vibration damping & energy dissipation. The Tex Treme fabric used in the layup of 9i rim is a Spread Tow fabric built from a hybrid of Innegra & T700 carbon fibres. The Spread Tow layout is significant because it also contributes some positive attributes
- the fibres are straighter (reduced crimp therefore higher strength) & it facilitates the use of less resin (lower weight). In the 9i rim the Spread Tow fabric is used on the outer layer of the rim, giving it the unique checkerboard pattern. Sounds good, but what does that mean for a rimsignificantly more compliance... Under a lab test the 9i rim was 50% more vertically compliant than a unidirectional T700 carbon rim of the same profile. This test involves loading the rim with a 100kg weight, in which the 9i rim exhibited a deflection of 15.74mm compared to 10.55mm on the standard T700 rim. It is widely acknowledged that vertical compliance is important for damage reduction (less likely to crack), a reduction of fatigue & to improve traction. Such an improvement in vertical compliance also brings a radically enhanced ride quality to the 9i wheelset. The Innegra equipped rims do not have the associated harsh stiffness of regular carbon wheels. Significantly more impact resistance... In the lab the 9i rim was able to handle impacts of almost double the standard required for MTB wheels by the UCI. The 9i rim withstood an impact of 140J compared the UCI stipulated requirement of an 80J impact, making it 75% stronger than the UCI requirements. In real world terms, the 9i rim can handle the equivalent of dropping a 15kg weight from a height of up to 1.08 metres onto the bare rim, thus making it 18% stronger than a recognised leading competitor who has published their data. Much less weight... Despite offering strength & compliance advantages, the use of Innegra also allows the construction of an extremely lightweight rim. The Innegra equipped 9i rim weighs just 428g (29”).
Features: Rim

Material: T-700 Unidirectional Carbon Fibre; Outer layer: Te Xtreme Plain Weave Spread Tow Carbon Fibre & Innegra S Hybrid Use: MTB Rim

Size: 29" Holes: 28h or 32h options Rim

Width: (Internal) 29mm; (External) 35mm Rim

Depth: 25mm ERD: 591mm Tubeless: Yes Single or Pair: Single Weight: 428g Buy Sector Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.









...

Sector 9i Carbon Rear MTB Rim Perfect for shredding the trails with your friends as well as exploring new off-road routes on your own, this carbon MTB rim is engineered for maximum performance. It features a hard-wearing unidirectional carbon fibre rim construction, which means that you can benefit from its fantastic strength without adding any unnecessary weight to your ride. Sector has taken this model's design a step further by also integrating Te Xtreme Innegra into the layup of the rims. This gives it 75% more impact resistance than standard carbon rims of the same profile. The 9i MTB rim is significantly more resistant to wear & tear & less prone to catastrophic failure. So what is Innegra? Innegra is a fibre derived from polypropylene that exhibits some highly beneficial properties, including high strength-to-weight ratio, resistance to damage, vibration damping & energy dissipation. The Tex Treme fabric used in the layup of 9i rim is a Spread Tow fabric built from a hybrid of Innegra & T700 carbon fibres. The Spread Tow layout is significant because it also contributes some positive attributes
- the fibres are straighter (reduced crimp therefore higher strength) & it facilitates the use of less resin (lower weight). In the 9i rim the Spread Tow fabric is used on the outer layer of the rim, giving it the unique checkerboard pattern. Sounds good, but what does that mean for a rimsignificantly more compliance... Under a lab test the 9i rim was 50% more vertically compliant than a unidirectional T700 carbon rim of the same profile. This test involves loading the rim with a 100kg weight, in which the 9i rim exhibited a deflection of 15.74mm compared to 10.55mm on the standard T700 rim. It is widely acknowledged that vertical compliance is important for damage reduction (less likely to crack), a reduction of fatigue & to improve traction. Such an improvement in vertical compliance also brings a radically enhanced ride quality to the 9i wheelset. The Innegra equipped rims do not have the associated harsh stiffness of regular carbon wheels. Significantly more impact resistance... In the lab the 9i rim was able to handle impacts of almost double the standard required for MTB wheels by the UCI. The 9i rim withstood an impact of 140J compared the UCI stipulated requirement of an 80J impact, making it 75% stronger than the UCI requirements. In real world terms, the 9i rim can handle the equivalent of dropping a 15kg weight from a height of up to 1.08 metres onto the bare rim, thus making it 18% stronger than a recognised leading competitor who has published their data. Much less weight... Despite offering strength & compliance advantages, the use of Innegra also allows the construction of an extremely lightweight rim. The Innegra equipped 9i rim weighs just 428g (29”).
Features: Rim

Material: T-700 Unidirectional Carbon Fibre; Outer layer: Te Xtreme Plain Weave Spread Tow Carbon Fibre & Innegra S Hybrid Use: MTB Rim

Size: 29" Holes: 28h or 32h options Rim

Width: (Internal) 29mm; (External) 35mm Rim

Depth: 25mm ERD: 591mm Tubeless: Yes Single or Pair: Single Weight: 428g Buy Sector Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.









...

Sector CT30 Carbon CX Wheelset Designed in partnership with wheel industry expert, Paul Lew, this CX wheelset features a unidirectional carbon fibre rim construction that gives it phenomenal strength without sacrificing any weight. Sector has also equipped this wheelset with a 30mm deep tubular rim profile that provides the ultimate blend for weight, mud-shedding ability, stiffness & aerodynamics. Sector has custom designed the carbon CT30 laminate & impact performance within their existing tooling to meet the specific requirements for use as a Cyclo-Cross disc brake rim. This will ensure your wheels will withstand multiple seasons of brutal Cyclo-Cross races. Cyclo-Cross puts a demanding amount of torque on the rear hub, often in very muddy & wet conditions. Into the CT30 we have laced a rear hub with a four-pawl ratchet & oversized pawls to ensure engagement never fails. Both front & rear hubs are fitted with high quality double sealed bearings to keep the worst of the mud out. The lightweight 7075-T6 Aluminium alloy hub shells feature angled flanges to ensure that they follow the path of the spoke, reducing the stress on the spoke & increasing its lifespan.
Features: Rim

Material: T-700 Unidirectional Carbon Fibre Wheel

Size: 700c Use: Cyclocross Spokes / Type: Pillar 1416 DB / J-Bend Nipples: Pillar Pro Alloy Hub Rotor Fitment: Centrelock Freehub: 4 Pawl, Shimano HG) Hole Count: 24h Rim

Width: (Internal) 24mm (External) N/A Rim

Depth: 30mm Tubeless: No Single or Pair: Pair End Caps: (Front) 100x 12mm / (Rear) 142x 12mm Extras: QR End Caps Weight: 1400g Buy Sector Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.








...

Sector CT30 Carbon Front CX Rim This front CX rim was developed in partnership with wheel industry expert, Paul Lew. It features a unidirectional carbon fibre rim construction, which gives it outstanding strength without sacrificing any weight. Sector has also equipped this wheelset with a 30mm deep tubular rim profile that provides the ultimate blend for weight, mud-shedding ability, stiffness & aerodynamics. Sector has custom designed the carbon CT30 laminate & impact performance within their existing tooling to meet the specific requirements for use as a Cyclo-Cross disc brake rim. This will ensure your wheels will withstand multiple seasons of brutal Cyclo-Cross races.
Features: Rim

Material: T-700 Unidirectional Carbon Fibre Rim

Size: 700c Use: CX Rim

Width: (Internal) 24mm; (External) N/A Rim

Depth: 30mm Hole Count: 24h Tubeless: No Single or Pair: Single Weight: 370g Buy Sector Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.








...

Sector CT30 Carbon Rear CX Rim This rear CX rim was developed in partnership with wheel industry expert, Paul Lew. It features a unidirectional carbon fibre rim construction, which gives it outstanding strength without sacrificing any weight. Sector has also equipped this wheelset with a 30mm deep tubular rim profile that provides the ultimate blend for weight, mud-shedding ability, stiffness & aerodynamics. Sector has custom designed the carbon CT30 laminate & impact performance within their existing tooling to meet the specific requirements for use as a Cyclo-Cross disc brake rim. This will ensure your wheels will withstand multiple seasons of brutal Cyclo-Cross races.
Features: Rim

Material: T-700 Unidirectional Carbon Fibre Rim

Size: 700c Use: CX Rim

Width: (Internal) 24mm; (External) N/A Rim

Depth: 30mm Hole Count: 24h Tubeless: No Single or Pair: Single Weight: 370g Buy Sector Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.








...

Sector CT30 Freehub Available in either a SRAM or Shimano freehub option, this CT30 Freehub offers a straightforward replacement 4-pawl freehub body for the Sector CT30 wheelset. Options available to select separately.SRAM Option For SRAM XD system SRAM XD 11 speed compatible 4 pawl system Dual bearings Shimano Option Shimano HG spline pattern 8 to 11 Road compatible 4 pawl system Dual bearings
Features: Freehub Option: Multiple options available to select Compatibility: Replacement 4-pawl freehub body for the Sector CT30 wheelset Buy Sector Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
...

Sector Dhi Carbon Front MTB Rim Ready for racing, this MTB rim features a robust unidirectional carbon fibre rim construction, which means that you can benefit from its exceptional strength without adding any unnecessary weight to your ride. Sector has taken this model's design a step further by also integrating Te Xtreme Innegra into the layup of the rim. This gives it 75% more impact resistance than a standard carbon rim of the same profile. Coming equipped with tubeless tyre compatibility, this DH race-ready rim means that you can enjoy greater stability & a lower weight on the most technical of trails. So what is Innegra? Innegra is a fibre derived from polypropylene that exhibits some highly beneficial properties, including high strength-to-weight ratio, resistance to damage, vibration damping & energy dissipation. The Tex Treme fabric used in the layup of the rim is a Spread Tow fabric built from a hybrid of Innegra & T700 carbon fibres. The Spread Tow layout is significant because it also contributes some positive attributes
- the fibres are straighter (reduced crimp therefore higher strength) & it facilitates the use of less resin (lower weight). In the rim the Spread Tow fabric is used on the outer layer of the rim, giving it the unique checkerboard pattern. Sounds good, but what does that mean for a rim? Significantly more compliance... Under a lab test the rim was 50% more vertically compliant than a unidirectional T700 carbon rim of the same profile. This test involves loading the rim with a 100kg weight, in which the rim exhibited a deflection of 15.74mm compared to 10.55mm on the standard T700 rim. It is widely acknowledged that vertical compliance is important for damage reduction (less likely to crack), a reduction of fatigue & to improve traction. Such an improvement in vertical compliance also brings a radically enhanced ride quality. The Innegra equipped rims do not have the associated harsh stiffness of regular carbon wheels. Significantly more impact resistance... In the lab the rim was able to handle impacts of almost double the standard required for MTB wheels by the UCI. The rim withstood an impact of 140J compared the UCI stipulated requirement of an 80J impact, making it 75% stronger than the UCI requirements. In real world terms, the rim can handle the equivalent of dropping a 15kg weight from a height of up to 1.08 metres onto the bare rim, thus making it 18% stronger than a recognised leading competitor who has published their data. Much less weight... Despite offering strength & compliance advantages, the use of Innegra also allows the construction of an extremely lightweight rim.

Features: Rim

Material: T-700 Unidirectional Carbon Fibre; Outer layer: Te Xtreme Plain Weave Spread Tow Carbon Fibre & Innegra S Hybrid Use: MTB Rim

Size: Multiple options available to select Holes: 32h Rim

Width: (Internal) 33mm; (External) 40mm ERD: 27.5": 548mm; 29": 582mm Tubeless: Yes Single or Pair: Single Weight: 27.5": 500g; 29": 530g Buy Sector Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.








...

Sector Dhi Carbon Front MTB Rim Ready for racing, this MTB rim features a robust unidirectional carbon fibre rim construction, which means that you can benefit from its exceptional strength without adding any unnecessary weight to your ride. Sector has taken this model's design a step further by also integrating Te Xtreme Innegra into the layup of the rim. This gives it 75% more impact resistance than a standard carbon rim of the same profile. Coming equipped with tubeless tyre compatibility, this DH race-ready rim means that you can enjoy greater stability & a lower weight on the most technical of trails. So what is Innegra? Innegra is a fibre derived from polypropylene that exhibits some highly beneficial properties, including high strength-to-weight ratio, resistance to damage, vibration damping & energy dissipation. The Tex Treme fabric used in the layup of the rim is a Spread Tow fabric built from a hybrid of Innegra & T700 carbon fibres. The Spread Tow layout is significant because it also contributes some positive attributes
- the fibres are straighter (reduced crimp therefore higher strength) & it facilitates the use of less resin (lower weight). In the rim the Spread Tow fabric is used on the outer layer of the rim, giving it the unique checkerboard pattern. Sounds good, but what does that mean for a rim? Significantly more compliance... Under a lab test the rim was 50% more vertically compliant than a unidirectional T700 carbon rim of the same profile. This test involves loading the rim with a 100kg weight, in which the rim exhibited a deflection of 15.74mm compared to 10.55mm on the standard T700 rim. It is widely acknowledged that vertical compliance is important for damage reduction (less likely to crack), a reduction of fatigue & to improve traction. Such an improvement in vertical compliance also brings a radically enhanced ride quality. The Innegra equipped rims do not have the associated harsh stiffness of regular carbon wheels. Significantly more impact resistance... In the lab the rim was able to handle impacts of almost double the standard required for MTB wheels by the UCI. The rim withstood an impact of 140J compared the UCI stipulated requirement of an 80J impact, making it 75% stronger than the UCI requirements. In real world terms, the rim can handle the equivalent of dropping a 15kg weight from a height of up to 1.08 metres onto the bare rim, thus making it 18% stronger than a recognised leading competitor who has published their data. Much less weight... Despite offering strength & compliance advantages, the use of Innegra also allows the construction of an extremely lightweight rim.

Features: Rim

Material: T-700 Unidirectional Carbon Fibre; Outer layer: Te Xtreme Plain Weave Spread Tow Carbon Fibre & Innegra S Hybrid Use: MTB Rim

Size: Multiple options available to select Holes: 32h Rim

Width: (Internal) 33mm; (External) 40mm ERD: 27.5": 548mm; 29": 582mm Tubeless: Yes Single or Pair: Single Weight: 27.5": 500g; 29": 530g Buy Sector Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.








...

Sector Dhi Carbon Rear MTB Rim Perfect for off-road racing, this MTB rim features a robust unidirectional carbon fibre rim construction, which means that you can benefit from its incredible strength without adding any excess weight to your ride. Sector has taken this model's design a step further by also integrating Te Xtreme Innegra into the layup of the rim. This gives it 75% more impact resistance than a standard carbon rim of the same profile. Coming equipped with tubeless tyre compatibility, this DH race-ready rim means that you can enjoy greater stability & a lower weight on the most technical of trails. So what is Innegra? Innegra is a fibre derived from polypropylene that exhibits some highly beneficial properties, including high strength-to-weight ratio, resistance to damage, vibration damping & energy dissipation. The Tex Treme fabric used in the layup of the rim is a Spread Tow fabric built from a hybrid of Innegra & T700 carbon fibres. The Spread Tow layout is significant because it also contributes some positive attributes
- the fibres are straighter (reduced crimp therefore higher strength) & it facilitates the use of less resin (lower weight). In the rim the Spread Tow fabric is used on the outer layer of the rim, giving it the unique checkerboard pattern. Sounds good, but what does that mean for a rim? Significantly more compliance... Under a lab test the rim was 50% more vertically compliant than a unidirectional T700 carbon rim of the same profile. This test involves loading the rim with a 100kg weight, in which the rim exhibited a deflection of 15.74mm compared to 10.55mm on the standard T700 rim. It is widely acknowledged that vertical compliance is important for damage reduction (less likely to crack), a reduction of fatigue & to improve traction. Such an improvement in vertical compliance also brings a radically enhanced ride quality. The Innegra equipped rims do not have the associated harsh stiffness of regular carbon wheels. Significantly more impact resistance... In the lab the rim was able to handle impacts of almost double the standard required for MTB wheels by the UCI. The rim withstood an impact of 140J compared the UCI stipulated requirement of an 80J impact, making it 75% stronger than the UCI requirements. In real world terms, the rim can handle the equivalent of dropping a 15kg weight from a height of up to 1.08 metres onto the bare rim, thus making it 18% stronger than a recognised leading competitor who has published their data. Much less weight... Despite offering strength & compliance advantages, the use of Innegra also allows the construction of an extremely lightweight rim.

Features: Rim

Material: T-700 Unidirectional Carbon Fibre; Outer layer: Te Xtreme Plain Weave Spread Tow Carbon Fibre & Innegra S Hybrid Use: MTB Rim

Size: Multiple options available to select Holes: 32h Rim

Width: (Internal) 33mm; (External) 40mm ERD: 27.5": 548mm; 29": 582mm Tubeless: Yes Single or Pair: Single Weight: 27.5": 500g; 29": 530g Buy Sector Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.








...

Sector Dhi Carbon Rear MTB Rim Perfect for off-road racing, this MTB rim features a robust unidirectional carbon fibre rim construction, which means that you can benefit from its incredible strength without adding any excess weight to your ride. Sector has taken this model's design a step further by also integrating Te Xtreme Innegra into the layup of the rim. This gives it 75% more impact resistance than a standard carbon rim of the same profile. Coming equipped with tubeless tyre compatibility, this DH race-ready rim means that you can enjoy greater stability & a lower weight on the most technical of trails. So what is Innegra? Innegra is a fibre derived from polypropylene that exhibits some highly beneficial properties, including high strength-to-weight ratio, resistance to damage, vibration damping & energy dissipation. The Tex Treme fabric used in the layup of the rim is a Spread Tow fabric built from a hybrid of Innegra & T700 carbon fibres. The Spread Tow layout is significant because it also contributes some positive attributes
- the fibres are straighter (reduced crimp therefore higher strength) & it facilitates the use of less resin (lower weight). In the rim the Spread Tow fabric is used on the outer layer of the rim, giving it the unique checkerboard pattern. Sounds good, but what does that mean for a rim? Significantly more compliance... Under a lab test the rim was 50% more vertically compliant than a unidirectional T700 carbon rim of the same profile. This test involves loading the rim with a 100kg weight, in which the rim exhibited a deflection of 15.74mm compared to 10.55mm on the standard T700 rim. It is widely acknowledged that vertical compliance is important for damage reduction (less likely to crack), a reduction of fatigue & to improve traction. Such an improvement in vertical compliance also brings a radically enhanced ride quality. The Innegra equipped rims do not have the associated harsh stiffness of regular carbon wheels. Significantly more impact resistance... In the lab the rim was able to handle impacts of almost double the standard required for MTB wheels by the UCI. The rim withstood an impact of 140J compared the UCI stipulated requirement of an 80J impact, making it 75% stronger than the UCI requirements. In real world terms, the rim can handle the equivalent of dropping a 15kg weight from a height of up to 1.08 metres onto the bare rim, thus making it 18% stronger than a recognised leading competitor who has published their data. Much less weight... Despite offering strength & compliance advantages, the use of Innegra also allows the construction of an extremely lightweight rim.

Features: Rim

Material: T-700 Unidirectional Carbon Fibre; Outer layer: Te Xtreme Plain Weave Spread Tow Carbon Fibre & Innegra S Hybrid Use: MTB Rim

Size: Multiple options available to select Holes: 32h Rim

Width: (Internal) 33mm; (External) 40mm ERD: 27.5": 548mm; 29": 582mm Tubeless: Yes Single or Pair: Single Weight: 27.5": 500g; 29": 530g Buy Sector Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.








...