. The Deore M6000 Direct Mount 3x 10 Front Mech is specifically designed for use on frames with a direct mounting point, providing a stable platform & perfect alignment with the chain. It features Shimano's " Side-Swing" technology, which drastically increases the shifting performance, reduces shifting effort & provides increased tyre clearance High-end Performance. This mech also gives you consistent, stable, & quiet shifting performance, even on the roughest trails. Deore M6000 offers you the technology of the high-end Shimano models but at a more wallet-friendly price!
Features:

Material: Outer Body: GFRP, Steel; Inner Body: Aluminium; Cage: Steel Gearing: 3-Speed (combined with 10-Speed) Chainline: 50mm Maximum Chainring

Size: 42T Capacity: 18T Maximum Difference Between Chainrings: 10T Cable Pull: Front-pull Swing Action: Side-Swing Mount: Direct mount Recommended Chain: HG-X 10-Speed Chainstay Angle: 66-69° Dyna-Sys compatible Body painted, cage plated 4 link bushings Smooth shifting & less cadence shock Close step (10T) Efficient cable routing Stable performance on suspension bikes Shifts consistently & runs quietly over rough terrain Custom plate design for single spike gear structure Only compatible with direct mount frames Technologies: Side-Swing: With Side-Swing technology, the shift performance of the front derailleur can be increased by 90 percent. Specifically designed with modern trail bikes in mind, it provides 15mm of increased tyre clearance & its cable routing dramatically reduces the shifting effort.A 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace & XTR products) Buy  Shimano Components from Chain Reaction Cycles, the World’s Largest Online Bike Store.




...

. The Deore M6000 Disc Brake offers great value for your money & gives you plenty of power & control at your fingertips. Finished ...

. The Deore M6000 Disc Brake offers great value for your money & gives you plenty of power & control at your fingertips. Finished ...

. The Deore M6000 Disc Brake Caliper works along with the M6000 lever to offer consistent & reliable braking performance in all conditions. In fact, as it is equipped with Shimano's " Servo Wave" technology, the force you apply to the lever is multiplied at the caliper to increase the stopping power even more. This caliper can also be used along with Shimano's " Ice-Tech" pads & rotors for even better performance when riding trails with extended descents

Features:
Material:  Body: Aluminium; Pistons: Resin Design: 2-piece Type: Hydraulic Brake Actuation: Mineral oil Hose: SM-BH90-SS (not included) Mount: Post mount (IS mount with mount adapter-sold separately) Front or rear mount Pistons: 2 Pads: G02S resin Connection: Straight Recommended Brake Lever: BL-M6000 Recommended Rotors: SM-RT64, SM-RT66, SM-RT54, SM-RT56 Steel caliper fixing bolts (5 mm) Lightweight Smooth & predictable control with balance of power & rigidity Heat insulated pad & piston Stable brake performance in any condition Powerful & responsive braking for a wide range of riding styles Durable construction with a cool integrated appearance One-way funnel bleeding Compatible with Ice-Tech rotors & brake pads Servo Wave technology Application: Trail, All-Mountain, Cross Country, City & Touring Technologies: Servo Wave: Excellent clearance at the caliper has enabled Shimano to use a short stroke Servo-Wave mechanism. As the brake lever is pulled a cam linkage enables rapid pad to rotor engagement. Then, at the point of contact the cam moves across to multiply the leverage ratio & increase the stopping power One-Way Bleeding: One way bleeding was developed for quick & easy prevention of air in Shimano’s hydraulic system. Shimano has streamlined the oil route throughout the system to prevent air bubbles from being captured in the system. One way oil routing plus a funnel tool with mineral oil provides an easy & clean bleeding system.A 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace & XTR products) Buy  Shimano Components from Chain Reaction Cycles, the World’s Largest Online Bike Store.


...

. The Deore M6000 Disc Brake Lever offers great value for your money & gives you plenty of power & control at your fingertips. ...

. Shimano's Deore M6000 Disc Front Hub features the tried & trusted cup & cone bearing system with Borozon treated & diamond coated races for super-smooth performance. It combines this with centre lock brake rotor compatibility for use with the latest disc brake systems. Durable & reliable, the M6000 is tough enough for everything from cross country & all-mountain riding, to touring & city bike use

Features:

Material: Hub: Aluminium; Axle: Steel Finish: Anodised Axle Type: 9mm quick release Axle Length: 100mm QR Skewer Length: 108mm Hub: Labyrinth & double contact seals Cone Races: Borozon treated Cup Races: Barrel polished Brake Type: Centre Lock disc P.C D.: Left: 44mm; Right: 44mm Flange Diameter: Left: 52 8mm; Right: 52 8mm Flange Distance: 60 2mm Weight: 245g (with quick release) Technologies: Cup & Cone Bearings: These angular contact bearings offer greater strength than sealed cartridge industrial bearings. This is due to their ability to displace lateral & vertical loads more effectively for super smooth rotation & longer durability. Angular contact bearings also allow easier maintenance, adjustability & serviceability Centre Lock System: This system makes rotor installation easy with its spline mount & a lock ring design. The lock ring mounting system reduces the total working hours by shortening the amount of time of both installation & removal. In addition, the secure fixing by the spline mount enhances precision & rigidity, while improving braking efficiency.A 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace & XTR products) Buy  Shimano Wheels & Tyres from Chain Reaction Cycles, the World’s Largest Online Bike Store.



...

. Shimano's Deore M6000 Disc Front Hub features the tried & trusted cup & cone bearing system with Borozon treated & diamond coated races for super-smooth performance. It combines this with centre lock brake rotor compatibility for use with the latest disc brake systems. Durable & reliable, the M6000 is tough enough for everything from cross country & all-mountain riding, to touring & city bike use

Features:

Material: Hub: Aluminium; Axle: Steel Finish: Anodised Axle Type: 9mm quick release Axle Length: 100mm QR Skewer Length: 108mm Hub: Labyrinth & double contact seals Cone Races: Borozon treated Cup Races: Barrel polished Brake Type: Centre Lock disc P.C D.: Left: 44mm; Right: 44mm Flange Diameter: Left: 52 8mm; Right: 52 8mm Flange Distance: 60 2mm Weight: 245g (with quick release) Technologies: Cup & Cone Bearings: These angular contact bearings offer greater strength than sealed cartridge industrial bearings. This is due to their ability to displace lateral & vertical loads more effectively for super smooth rotation & longer durability. Angular contact bearings also allow easier maintenance, adjustability & serviceability Centre Lock System: This system makes rotor installation easy with its spline mount & a lock ring design. The lock ring mounting system reduces the total working hours by shortening the amount of time of both installation & removal. In addition, the secure fixing by the spline mount enhances precision & rigidity, while improving braking efficiency.A 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace & XTR products) Buy  Shimano Wheels & Tyres from Chain Reaction Cycles, the World’s Largest Online Bike Store.



...

. Shimano's Deore M6000 Disc Rear Hub features the tried & trusted cup & cone bearing system with Borozon treated & diamond coated races for super-smooth performance. It combines this with centre lock brake rotor compatibility for use with the latest disc brake systems. Durable & reliable, the M6000 is tough enough for everything from cross country & all-mountain riding, to touring & city bike use

Features:

Material: Hub: Aluminium; Axle: Steel Finish: Anodised Axle Length: 135mm Axle Type: 9mm quick release QR Skewer Length: 168mm Hub: Labyrinth & double contact seals Freehub Body: Shimano 8 to 10-Speed Cone Races: Borozon treated Cup Races: Barrel polished Brake Type: Centre Lock disc P.C D.: Left:44mm; Right: 45mm Flange Diameter: Left: 52 8mm; Right: 53 8mm Flange Distance: 57 4mm Weight: 430g (with quick release) Technologies: Cup & Cone Bearings: These angular contact bearings offer greater strength than sealed cartridge industrial bearings. This is due to their ability to displace lateral & vertical loads more effectively for super smooth rotation & longer durability. Angular contact bearings also allow easier maintenance, adjustability & serviceability Centre Lock System: This system makes rotor installation easy with its spline mount & a lock ring design. The lock ring mounting system reduces the total working hours by shortening the amount of time of both installation & removal. In addition, the secure fixing by the spline mount enhances precision & rigidity, while improving braking efficiency.A 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace & XTR products) Buy  Shimano Wheels & Tyres from Chain Reaction Cycles, the World’s Largest Online Bike Store.



...

. Shimano's Deore M6000 Disc Rear Hub features the tried & trusted cup & cone bearing system with Borozon treated & diamond coated races for super-smooth performance. It combines this with centre lock brake rotor compatibility for use with the latest disc brake systems. Durable & reliable, the M6000 is tough enough for everything from cross country & all-mountain riding, to touring & city bike use

Features:

Material: Hub: Aluminium; Axle: Steel Finish: Anodised Axle Length: 135mm Axle Type: 9mm quick release QR Skewer Length: 168mm Hub: Labyrinth & double contact seals Freehub Body: Shimano 8 to 10-Speed Cone Races: Borozon treated Cup Races: Barrel polished Brake Type: Centre Lock disc P.C D.: Left:44mm; Right: 45mm Flange Diameter: Left: 52 8mm; Right: 53 8mm Flange Distance: 57 4mm Weight: 430g (with quick release) Technologies: Cup & Cone Bearings: These angular contact bearings offer greater strength than sealed cartridge industrial bearings. This is due to their ability to displace lateral & vertical loads more effectively for super smooth rotation & longer durability. Angular contact bearings also allow easier maintenance, adjustability & serviceability Centre Lock System: This system makes rotor installation easy with its spline mount & a lock ring design. The lock ring mounting system reduces the total working hours by shortening the amount of time of both installation & removal. In addition, the secure fixing by the spline mount enhances precision & rigidity, while improving braking efficiency.A 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace & XTR products) Buy  Shimano Wheels & Tyres from Chain Reaction Cycles, the World’s Largest Online Bike Store.



...

. The Deore M6000 E-Type 3x 10 Front Mech features Shimano's " Side-Swing" technology, which drastically increases the shifting performance, reduces shifting effort, & provides increased tyre clearance. This mech also gives you consistent, stable, & quiet shifting performance even on the roughest trails. Deore M6000 offers you the technology of the high-end Shimano models but at a more wallet-friendly price!
Features:

Material: Outer Body: GFRP, Steel; Inner Body: Aluminium; Cage: Steel Gearing: 3-Speed (combined with 10-Speed) Chainline: 50mm Maximum Chainring

Size: 42T Capacity: 18T Maximum Difference Between Chainrings: 10T Cable Pull: Front-pull Swing Action: Side-Swing Mount: E-Type (bottom bracket mount) Recommended Chain: HG-X 10-Speed chain Chainstay Angle: 66-69° Dyna-Sys compatible Body painted, cage plated 4 link bushings Smooth shifting & less cadence shock Close step (10T) Efficient cable routing Stable performance on suspension bikes Shifts consistently & runs quietly over rough terrain Custom plate design for single spike gear structure Chain catcher Only compatible with E-type frames Technologies: Side-Swing: With side-swing technology, the shift performance of the front derailleur can be increased by 90 percent. Specifically designed with modern trail bikes in mind, it provides 15mm of increased tyre clearance & its cable routing dramatically reduces the shifting effort.A 2 year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace & XTR products) Buy  Shimano Components from Chain Reaction Cycles, the World’s Largest Online Bike Store.




...