United Kingdom
France
Germany
Netherlands
Sweden
USA
Italy
Spain
Sporting Goods > Outdoor Recreation > Cycling > Bicycle Accessories > Bicycle Fenders
Available
-
The Crud Raceguard XL
Rear is British designed
and manufactured so you
know they know mud!
Measuring 5 inches longer
than the standard
Raceguard, the XL
Raceguard Comfortably
fits any bike with
between 24mm and 32mm
seatpost diameter. Its
perfect for 27.5 and 29er
wheel sizes with maximum
off-road protection. It
fixes in seconds using a
one-bolt system using
just one 5mm Allen key
without removing
seatpost. This Mudguard
is great for: Quick and
easy to fit with Maximum
coverage the XL rear is
effective and great value
for money Features Quick
and easy to mount
Suitable for 27.5 and
29er wheel sizes maximum
off-road protection
Availability: In Stock
£17.99
Available
-
The Crud Catcher is
British designed so you
know they know mud! The
Catcher has been the
‘go to’ mountain bike
mudguard for a couple of
decades. Fitting under
the downtube of pretty
much any Mountain bike it
stops mud and water
coming off the back of
the wheel and onto you.
Whilst it won’t keep
you totally dry it will
keep the worst off making
the crud catcher a great
lightweight quick mount
option for MTB mudguards.
This Mudguard is great
for: if you don’t
really want to fit a
mudguard but would like
to reduce the amount of
mud and water you get
covered in. Light and
easy to fit you’d
barely know it was there
if it wasn’t stopping
some of the crud!
Features Downtube mounted
front mudguard Mounted in
seconds Soft nose edge
designed for improved fit
Lightweight
Availability: In Stock
£8.99
Available
-
The Crud RaceGuard rear
mudguard is a classic bit
of British design and has
been the ‘go to’
mountain bike mudguard
for a couple of decades.
This version has been
updated with a
fast-fitting, very
simple one bolt fixing
system allowing it to be
fitted in less than a
minute, without removing
the seatpost. The Cud
RaceGuard catches any
loose mud that gets
flicked up from the rear
wheel and keeps your back
clean and will stay in
place regardless of how
rough the terrain you are
riding on is. Features
Super light rear mudguard
Strong and durable design
Seatpost mounting system
fits in minutes 10 out of
10 review by MBR
Availability: In Stock
£14.99
Available
-
The Twin Pac Mudguard Set
consist of the Crud
Catcher front and
Raceguard rear. The Crud
Catcher is British
designed so you know they
know mud! The Catcher has
been the ‘go to’
mountain bike mudguard
for a couple of decades.
Fitting under the
downtube of pretty much
any Mountain bike it
stops mud and water
coming off the back of
the wheel and onto you.
Whilst it won’t keep
you totally dry it will
keep the worst off making
the crud catcher a great
lightweight quick mount
option for MTB mudguards.
This Mudguard is great
for: if you don’t
really want to fit a
mudguard but would like
to reduce the amount of
mud and water you get
covered in. Light and
easy to fit you’d
barely know it was there
if it wasn’t stopping
some of the mud! Features
Downtube mounted front
mudguard Mounted in
seconds Soft nose edge
designed for improved fit
The Crud Raceguard XL
Rear is British designed
and manufactured so you
know they know mud!
Measuring 5 inches longer
than the standard
Raceguard, the XL
Raceguard Comfortably
fits any bike with
between 24mm and 32mm
seatpost diameter. Its
perfect for 27.5 and 29er
wheel sizes with maximum
off-road protection. It
fixes in seconds using a
one-bolt system using
just one 5mm Allen key
without removing
seatpost. This Mudguard
is great for: Quick and
easy to fit with Maximum
coverage the XL rear is
effective and great value
for money Features Quick
and easy to mount
Suitable for 27.5 and
29er wheel sizes maximum
off-road protection
Availability: In Stock
£19.99
Available
-
Specialized Dry Tech set
700c designed to be light
using multi-material
design to ensure
they’re tough where
they need to be and light
everywhere else.
Heat-treated,
lightweight aluminium
fender stays with
stainless steel hardware
make these mudguards
sleek and stylish.
Engineered in the
Specialized wind tunnel
to improve the protection
and minimise spray.
Available in three
different sizes (35, 45,
and 52mm), and theyre
designed to work on bikes
with 700C wheels—with
or without Specialized
Plug + Play frame
mounting. This mudguard
is perfect for: designed
to be as light as
possible coupled with the
reduced spray make these
perfect for club rides
Features Engineered
fender set with extended,
research-based length
for superior water
protection. Lightweight,
yet highly durable
multi-material design.
Engineered in our Win
Tunnel to improve
protection and minimize
water spray. Designed to
work on bikes with 700C
wheels and with or
without Specialized Plug
+ Play frame mounting.
Heat-treated,
lightweight aluminium
fender stays with
stainless steel hardware.
Availability: In Stock
£65.00
Available
-
The Crud RaceGuard rear
mudguard is a classic bit
of British design and has
been the ‘go to’
mountain bike mudguard
for a couple of decades.
This version has been
updated with a
fast-fitting, very
simple one bolt fixing
system allowing it to be
fitted in less than a
minute, without removing
the seatpost. The Cud
RaceGuard catches any
loose mud that gets
flicked up from the rear
wheel and keeps your back
clean and will stay in
place regardless of how
rough the terrain you are
riding on is. Features
Super light rear mudguard
Strong and durable design
Seatpost mounting system
fits in minutes 10 out of
10 review by MBR
Availability: In Stock
£14.99
Available
-
Specialized Dry Tech set
700c designed to be light
using multi-material
design to ensure
they’re tough where
they need to be and light
everywhere else.
Heat-treated,
lightweight aluminium
fender stays with
stainless steel hardware
make these mudguards
sleek and stylish.
Engineered in the
Specialized wind tunnel
to improve the protection
and minimise spray.
Available in three
different sizes (35, 45,
and 52mm), and theyre
designed to work on bikes
with 700C wheels—with
or without Specialized
Plug + Play frame
mounting. This mudguard
is perfect for: designed
to be as light as
possible coupled with the
reduced spray make these
perfect for club rides
Features Engineered
fender set with extended,
research-based length
for superior water
protection. Lightweight,
yet highly durable
multi-material design.
Engineered in our Win
Tunnel to improve
protection and minimize
water spray. Designed to
work on bikes with 700C
wheels and with or
without Specialized Plug
+ Play frame mounting.
Heat-treated,
lightweight aluminium
fender stays with
stainless steel hardware.
Availability: In Stock
£65.00
Available
-
The Crud Road Racer MK3
Mudguards are handily
designed to fit almost
any 700c road, gravel or
trekking bike including
disc brake and calliper
brake models. Even more
conveniently your bike
does not need to have
mudguard eyelets to fit
these mudguards on. With
a superfast fixing system
that doesn’t require
any tools. Weighing in at
only 260 grams and able
to take tyres up to 38c
wide. The Crud Road racer
are quick easy and
convenient These
mudguards are great for
buying mudguards can be
confusing and full of
pitfalls. The CudRoad
Racer MK3 takes all of
the concerns about
finding the right
Mudguards out of the
equation. Once they
arrive they are quick and
easy to fit, provide
full coverage and don’t
add a huge volume of
weight to your bike
Features • Roadracer
MK3 fits almost any brand
of road bike with tyres
up to 700x38c • Super
Strong Duotec Interlock
fixing system for trouble
free attachment to your
bike.. no tools needed!
• Suits all brake
systems • Does not
require mudguard eyelets
to be present on your
frame • Perfect for all
road, gravel and
trekking bikes
Availability: In Stock
£39.99
Available
-
Crud Racepac 29er
Mudguard Set consists of
a Full size Crud Catcher
front and 29er rear
mudguard, with the same
basic design as the
standard Crud front and
rear mudguards, but with
a beefed-up bracket and a
much longer, wider blade
to accommodate 29”
wheel mountain bikes. The
Crud Racepac 29er is
easier the lightest
full-size mudguard on the
market. British
Manufactured and designed
These Crud mudguards are
a British classic and
have been the ‘go to’
mountain bike mudguards
for a couple of decades.
They will fit pretty much
any mountain bike and
will keep the worst of
any mud off you making
winter rides much more
comfortable. These
mudguards are great for
Mountain bike riders
wanting great coverage
with lightweight
mudguards Features Rear
blade is increased in
length to suit 29ers Fits
in minutes Strong and
durable design Includes a
full size Crud Catcher
for the front
Availability: In Stock
£22.99
Available
-
The Crud Catcher is
British designed so you
know they know mud! The
Catcher has been the
‘go to’ mountain bike
mudguard for a couple of
decades. Fitting under
the downtube of pretty
much any Mountain bike it
stops mud and water
coming off the back of
the wheel and onto you.
Whilst it won’t keep
you totally dry it will
keep the worst off making
the crud catcher a great
lightweight quick mount
option for MTB mudguards.
This Mudguard is great
for: if you don’t
really want to fit a
mudguard but would like
to reduce the amount of
mud and water you get
covered in. Light and
easy to fit you’d
barely know it was there
if it wasn’t stopping
some of the crud!
Features Downtube mounted
front mudguard Mounted in
seconds Soft nose edge
designed for improved fit
Lightweight
Availability: In Stock
£8.99
Available
-
The Crud Catcher is
British designed so you
know they know mud! The
Catcher has been the
‘go to’ mountain bike
mudguard for a couple of
decades. Fitting under
the downtube of pretty
much any Mountain bike it
stops mud and water
coming off the back of
the wheel and onto you.
Whilst it won’t keep
you totally dry it will
keep the worst off making
the crud catcher a great
lightweight quick mount
option for MTB mudguards.
This Mudguard is great
for: if you don’t
really want to fit a
mudguard but would like
to reduce the amount of
mud and water you get
covered in. Light and
easy to fit you’d
barely know it was there
if it wasn’t stopping
some of the crud!
Features Downtube mounted
front mudguard Mounted in
seconds Soft nose edge
designed for improved fit
Lightweight
Availability: In Stock
£8.99
Available
-
The Crud Catcher is
British designed so you
know they know mud! The
Catcher has been the
‘go to’ mountain bike
mudguard for a couple of
decades. Fitting under
the downtube of pretty
much any Mountain bike it
stops mud and water
coming off the back of
the wheel and onto you.
Whilst it won’t keep
you totally dry it will
keep the worst off making
the crud catcher a great
lightweight quick mount
option for MTB mudguards.
This Mudguard is great
for: if you don’t
really want to fit a
mudguard but would like
to reduce the amount of
mud and water you get
covered in. Light and
easy to fit you’d
barely know it was there
if it wasn’t stopping
some of the crud!
Features Downtube mounted
front mudguard Mounted in
seconds Soft nose edge
designed for improved fit
Lightweight
Availability: In Stock
£8.99
Available
-
Bontrager NCS Mudguard
front and rear Set
Complete arch mudguards
arrive assembled ready
for super quick
installation. With
integrated rear Blendr
light mount for use with
Bontrager Flare lights.
Light weight, rust
resistant and durable
with several elements to
ensure adjustment and a
stable fit Available in
·700c x 18-25 mm ·700c
x 28-35 mm ·700 c x
35-45 mm Suitable for:
·700c and 26”MTB This
Mudguard is great for:
the Bontrager NCS
Mudguard front and rear
Set is perfect for those
wanting full coverage,
the option for the blendr
light gives you great
variety when it comes to
your fixtures and
fittings. With the double
strut with quick
adjustment means you can
get the right fit for
your bike. Features Fully
assembled mudguard that
install in minutes
Integrated rear Blendr
light mount for use with
Bontrager Flare lights
No-cut struts allow quick
strut adjustment for
proper tyre clearance The
double-back strut on rear
mudguard adds support and
stability Made of
lightweight yet
super-durable
polycarbonate Stainless
steel hardware resists
rust
Availability: In Stock
£39.99
Available
-
Bontrager NCS Mudguard
front and rear Set
Complete arch mudguards
arrive assembled ready
for super quick
installation. With
integrated rear Blendr
light mount for use with
Bontrager Flare lights.
Light weight, rust
resistant and durable
with several elements to
ensure adjustment and a
stable fit Available in
·700c x 18-25 mm ·700c
x 28-35 mm ·700 c x
35-45 mm Suitable for:
·700c and 26”MTB This
Mudguard is great for:
the Bontrager NCS
Mudguard front and rear
Set is perfect for those
wanting full coverage,
the option for the blendr
light gives you great
variety when it comes to
your fixtures and
fittings. With the double
strut with quick
adjustment means you can
get the right fit for
your bike. Features Fully
assembled mudguard that
install in minutes
Integrated rear Blendr
light mount for use with
Bontrager Flare lights
No-cut struts allow quick
strut adjustment for
proper tyre clearance The
double-back strut on rear
mudguard adds support and
stability Made of
lightweight yet
super-durable
polycarbonate Stainless
steel hardware resists
rust
Availability: In Stock
£39.99
Available
-
The Crud RaceGuard rear
mudguard is a classic bit
of British design and has
been the ‘go to’
mountain bike mudguard
for a couple of decades.
This version has been
updated with a
fast-fitting, very
simple one bolt fixing
system allowing it to be
fitted in less than a
minute, without removing
the seatpost. The Cud
RaceGuard catches any
loose mud that gets
flicked up from the rear
wheel and keeps your back
clean and will stay in
place regardless of how
rough the terrain you are
riding on is. Features
Super light rear mudguard
Strong and durable design
Seatpost mounting system
fits in minutes 10 out of
10 review by MBR
Availability: In Stock
£14.99
Available
-
The Crud RaceGuard rear
mudguard is a classic bit
of British design and has
been the ‘go to’
mountain bike mudguard
for a couple of decades.
This version has been
updated with a
fast-fitting, very
simple one bolt fixing
system allowing it to be
fitted in less than a
minute, without removing
the seatpost. The Cud
RaceGuard catches any
loose mud that gets
flicked up from the rear
wheel and keeps your back
clean and will stay in
place regardless of how
rough the terrain you are
riding on is. Features
Super light rear mudguard
Strong and durable design
Seatpost mounting system
fits in minutes 10 out of
10 review by MBR
Availability: In Stock
£14.99
Available
-
Bontrager NCS Mudguard
front and rear Set
Complete arch mudguards
arrive assembled ready
for super quick
installation. With
integrated rear Blendr
light mount for use with
Bontrager Flare lights.
Light weight, rust
resistant and durable
with several elements to
ensure adjustment and a
stable fit Available in
·700c x 18-25 mm ·700c
x 28-35 mm ·700 c x
35-45 mm Suitable for:
·700c and 26”MTB This
Mudguard is great for:
the Bontrager NCS
Mudguard front and rear
Set is perfect for those
wanting full coverage,
the option for the blendr
light gives you great
variety when it comes to
your fixtures and
fittings. With the double
strut with quick
adjustment means you can
get the right fit for
your bike. Features Fully
assembled mudguard that
install in minutes
Integrated rear Blendr
light mount for use with
Bontrager Flare lights
No-cut struts allow quick
strut adjustment for
proper tyre clearance The
double-back strut on rear
mudguard adds support and
stability Made of
lightweight yet
super-durable
polycarbonate Stainless
steel hardware resists
rust
Availability: In Stock
£39.99
Available
-
Consisting of a Lighter
and sleeker Crud Catcher
front and Raceguard rear
than the Twinpac. The
Racepac offers all round
mud protection for use on
hybrid/trekking bikes as
well as mountain bikes.
The Crud Catcher is
British designed so you
know they know mud! The
Catcher has been the
‘go to’ mountain bike
mudguard for a couple of
decades. Fitting under
the downtube of pretty
much any Mountain bike it
stops mud and water
coming off the back of
the wheel and onto you.
Whilst it won’t keep
you totally dry it will
keep the worst off making
the crud catcher a great
lightweight quick mount
option for MTB mudguards.
This Mudguard is great
for: if you don’t
really want to fit a
mudguard but would like
to reduce the amount of
mud and water you get
covered in. Light and
easy to fit you’d
barely know it was there
if it wasn’t stopping
some of the mud! Features
Downtube mounted front
mudguard Mounted in
seconds Soft nose edge
designed for improved fit
The Crud Raceguard XL
Rear is British designed
and manufactured so you
know they know mud!
Measuring 5 inches longer
than the standard
Raceguard, the XL
Raceguard Comfortably
fits any bike with
between 24mm and 32mm
seatpost diameter. Its
perfect for 27.5 and 29er
wheel sizes with maximum
off-road protection. It
fixes in seconds using a
one-bolt system using
just one 5mm Allen key
without removing
seatpost. This Mudguard
is great for: Quick and
easy to fit with Maximum
coverage the XL rear is
effective and great value
for money Features Quick
and easy to mount
Suitable for 27.5 and
29er wheel sizes maximum
off-road protection
Availability: In Stock
£19.99
Available
-
The Big AssSaver is
designed specifically for
wide tyres the extra
width obviously needed to
deflect the water and mud
Super lightweight and
convenient the Ass Saver
fits neatly on the front
saddle rails under the
saddle of your bike. The
advantage with this
solution is that saddles
are more uniform in this
area and we can therefore
provide a proper fit to a
much wider range of
saddles. Attaching only
to the front rails makes
the Ass Saver
self-centring, so if you
accidently knock it, it
will regain its centred
position. Using the
origami style Patent
pending FLIP-TIP system
makes it super easy to
open up the recyclable
polypropylene AssSaver
and do exactly that.
Measuring in at 383x115.5
mm the AssSaver obviously
doesn’t provide full
cover but will keep the
worst of the rain and mud
off. Technical data
Measures:383x115.5 mm
Weight:25.5 g
Material:0.8 mm PP
(Polypropylene) This
Mudguard is great for:
For those big wheeled
trail riders who don’t
want full or permanent
mudguards on their bike
The Ass Saver is designed
for you to almost forget
it’s there until you
need it. Whilst it
won’t provide complete
protection from the
elements it will deflect
the worst of the rain and
mud. Features Easy to
mount, requires no tools
New patented FLIP-TIP
attachment system Fits
every standard rail
saddle, also with carbon
rails Suitable for tire
widths between 30-50 mm
Great for gravel
Availability: In Stock
£9.99
Available
-
The AssSaver teamed up
with Valencia-based
artist and illustrator
ENISAURUS to create the
Spacy Crazy.Featuring
Illustration designed
around a concept of the
centre of the universe,
encountering hostile
alien blobs, planet
bubbles and time warps.
The Spacy Crazy AssSaver
is designed specifically
for wide tyres the extra
width obviously needed to
deflect the water and
mud. Super lightweight
and convenient the Ass
Saver fits neatly on the
front saddle rails under
the saddle of your
bike.The advantage with
this solution is that
saddles are more uniform
in this area and we can
therefore provide a
proper fit to a much
wider range of saddles.
Attaching only to the
front rails makes the Ass
Saver self-centring, so
if you accidently knock
it, it will regain its
centred position. Using
the origami style Patent
pending FLIP-TIP system
makes it super easy to
open up the recyclable
polypropylene AssSaver
and do exactly that.
Measuring in at 383x115.5
mm the AssSaver obviously
doesn’t provide full
cover but will keep the
worst of the rain and mud
off. Technical data
Measures:383x115.5 mm
Weight:25.5 g
Material:0.8 mm PP
(Polypropylene) This
Mudguard is great for:
For those big wheeled
trail riders who don’t
want full or permanent
mudguards on their bike
The Ass Saver is designed
for you to almost forget
it’s there until you
need it. Whilst it
won’t provide complete
protection from the
elements it will deflect
the worst of the rain and
mud. Features Easy to
mount, requires no tools
New patented FLIP-TIP
attachment system Fits
every standard rail
saddle, also with carbon
rails Suitable for tire
widths between 30-50 mm
Great for gravel
Availability: In Stock
£9.99
Available
-
Super lightweight and
convenient the Ass Saver
fits neatly on the front
saddle rails under the
saddle of your bike. The
advantage with this
solution is that saddles
are more uniform in this
area and we can therefore
provide a proper fit to a
much wider range of
saddles. Attaching only
to the front rails makes
the Ass Saver
self-centring, so if you
accidently knock it, it
will regain its centred
position. Using the
origami style Patent
pending FLIP-TIP system
makes it super easy to
open up the recyclable
polypropylene AssSaver
and do exactly that.
Measuring in at 38 x 10.2
cm the AssSaver obviously
doesn’t provide full
cover but will keep the
worst of the rain and mud
off. Technical data
Measures:380x102 mm
Weight:19 g Material:0.8
mm PP (Polypropylene)
This Mudguard is great
for: For those who
don’t want full or
permanent mudguards on
their bike The Ass Saver
is designed for you to
almost forget it’s
there until you need it.
Whilst it won’t provide
complete protection from
the elements it will
deflect the worst of the
rain and mud. Features
Material: 100% recyclable
polypropylene weight: 19
grams measures: 380 x 102
mm made in Sweden new
flip tip design suitable
for tire widths between
23-35 mm
Availability: In Stock
£9.99
Available
-
Specialized plug and play
mudguard set are
lightweight and robust,
featuring an anodized
finished to give your
bike an added style boost
The plug and play
mudguards protect both
you and anyone taking
advantage of your draft.
Supports "Plug and
Play" frame and fork
mounting. Aluminium
struts and stainless
steel hardware ensure
these mudguards are light
and strong. This mudguard
is perfect for: The
Specialized plug and play
mudguard set provided
stylish full coverage.
The mix of aluminium and
steel ensure these
mudguards are as light as
they can be whilst still
robust to handle whatever
the elements throw at
them Features High end
aluminium fender set for
700c wheels and tires up
to 30mm width. Strong and
lightweight extruded
aluminium fenders in
robust anodized finish.
Lightweight aluminium
struts and stainless
steel hardware, all
black. Supports “Plug
and Play” frame/fork
mounting for conventional
fender struts attachment.
Includes additional
hardware for standard
frame mounting. Front
length: 660mm Rear
length: 1133mm
Availability: In Stock
£55.00
Available
-
The Big AssSaver is
designed specifically for
wide tyres the extra
width obviously needed to
deflect the water and mud
Super lightweight and
convenient the Ass Saver
fits neatly on the front
saddle rails under the
saddle of your bike. The
advantage with this
solution is that saddles
are more uniform in this
area and we can therefore
provide a proper fit to a
much wider range of
saddles. Attaching only
to the front rails makes
the Ass Saver
self-centring, so if you
accidently knock it, it
will regain its centred
position. Using the
origami style Patent
pending FLIP-TIP system
makes it super easy to
open up the recyclable
polypropylene AssSaver
and do exactly that.
Measuring in at 383x115.5
mm the AssSaver obviously
doesn’t provide full
cover but will keep the
worst of the rain and mud
off. Technical data
Measures:383x115.5 mm
Weight:25.5 g
Material:0.8 mm PP
(Polypropylene) This
Mudguard is great for:
For those big wheeled
trail riders who don’t
want full or permanent
mudguards on their bike
The Ass Saver is designed
for you to almost forget
it’s there until you
need it. Whilst it
won’t provide complete
protection from the
elements it will deflect
the worst of the rain and
mud. Features Easy to
mount, requires no tools
New patented FLIP-TIP
attachment system Fits
every standard rail
saddle, also with carbon
rails Suitable for tire
widths between 30-50 mm
Great for gravel
Availability: In Stock
£9.99
Available
-
Mudguard part bontrager
nebula dropout attachment
rplcmnt parts
Availability: In Stock
£7.99
Available
-
The Crud Catcher is
British designed so you
know they know mud! The
Catcher has been the
‘go to’ mountain bike
mudguard for a couple of
decades. Fitting under
the downtube of pretty
much any Mountain bike it
stops mud and water
coming off the back of
the wheel and onto you.
Whilst it won’t keep
you totally dry it will
keep the worst off making
the crud catcher a great
lightweight quick mount
option for MTB mudguards.
This Mudguard is great
for: if you don’t
really want to fit a
mudguard but would like
to reduce the amount of
mud and water you get
covered in. Light and
easy to fit you’d
barely know it was there
if it wasn’t stopping
some of the crud!
Features Downtube mounted
front mudguard Mounted in
seconds Soft nose edge
designed for improved fit
Lightweight
Availability: In Stock
£8.99
Available
-
Super lightweight and
convenient the Ass Saver
fits neatly on the front
saddle rails under the
saddle of your bike. The
advantage with this
solution is that saddles
are more uniform in this
area and we can therefore
provide a proper fit to a
much wider range of
saddles. Attaching only
to the front rails makes
the Ass Saver
self-centring, so if you
accidently knock it, it
will regain its centred
position. Using the
origami style Patent
pending FLIP-TIP system
makes it super easy to
open up the recyclable
polypropylene AssSaver
and do exactly that.
Measuring in at 38 x 10.2
cm the AssSaver obviously
doesn’t provide full
cover but will keep the
worst of the rain and mud
off. Technical data
Measures:380x102 mm
Weight:19 g Material:0.8
mm PP (Polypropylene)
This Mudguard is great
for: For those who
don’t want full or
permanent mudguards on
their bike The Ass Saver
is designed for you to
almost forget it’s
there until you need it.
Whilst it won’t provide
complete protection from
the elements it will
deflect the worst of the
rain and mud. Features
Material: 100% recyclable
polypropylene weight: 19
grams measures: 380 x 102
mm made in Sweden new
flip tip design suitable
for tire widths between
23-35 mm
Availability: In Stock
£9.99
Available
-
The Mudder is designed to
keep your eyes muck-free
as you speed through
those trails. Minimalist
clever design resulting
in a fork mounted front
mudguard with an
unobtrusive design and
unsurpassed efficiency
when it comes to keeping
your face free from dirt.
The design features
innovative tire-hugging
deflectors that can be
adjusted so virtually no
mud will pass. Flaps at
the front of the Mudder
is designed to be folded
down towards the tire for
even better protection.
Depending on your tire
clearance they may be
folded very little or
very much Designed to fit
all standard front
suspension forks with
wheel sizes between
26" to 29". If
you have a fork with an
inverted fork bridge,
like DT Swiss or Magura,
it wont fit without
modifications. Technical
data Measures:237x154 mm
Weight:18 g Material:0.8
mm PP (Polypropylene)
This Mudguard is great
for: Mountain and trail
riders that like to ride
dirt not eat it. Super
lightweight and easy to
keep on the bike all year
round. The Mudder
doesn’t provide full
protection it will keep
the worst of the mud off
your face Deflectors
increase efficiency Easy
to mount with included
zipties Fits all
suspension forks with a
fork bridge Super
lightweight, only 18
grams Suitable for all
wheel sizes
Availability: In Stock
£9.99
Available
-
The AssSaver Mudder Mini
like all AssSavers is
quick and simple to mount
to the fork legs just
above the front tyre,
anti slip straps
guarantee a perfect fit
on all fork sizes with
clearance for tire widths
between 32 mm up to55 mm.
It will not workon a road
fork with narrow
clearance or for fat
bikes. The AssSaver
Mudder Mini is built to
stop gravel and dirt
being thrown into the
riders face and headset
bearings, an issue
common for gravel riders
where the fine sand
working its way into the
bearings quickly
destroying them. This
Mudder Mini ensures a
dramatic reduction in the
spray in your face and
onto the vulnerable parts
of your bike letting you
enjoy your ride Technical
data · Measures:90 x170
mm (effective) ·
Weight:21 g Material: 0.8
mm PP (Polypropylene)
This mudguard is great
for: Built for gravel
bike use this will be
handy all year round dry
or wet. The Mudder Mini
will protect your face
and bike from damage but
will provide limited
protection from water
Features · Protecting
face and headset bearings
· Mounts easy and
securely with antislip
straps · Fits all
cross/gravel forks ·
Super lightweight,
only21 grams · Suitable
fortire widths 32-55 mm
Availability: In Stock
£14.00
Available
-
The Mudder is designed to
keep your eyes muck-free
as you speed through
those trails. Minimalist
clever design resulting
in a fork mounted front
mudguard with an
unobtrusive design and
unsurpassed efficiency
when it comes to keeping
your face free from dirt.
The design features
innovative tire-hugging
deflectors that can be
adjusted so virtually no
mud will pass. Flaps at
the front of the Mudder
is designed to be folded
down towards the tire for
even better protection.
Depending on your tire
clearance they may be
folded very little or
very much Designed to fit
all standard front
suspension forks with
wheel sizes between
26" to 29". If
you have a fork with an
inverted fork bridge,
like DT Swiss or Magura,
it wont fit without
modifications. Technical
data Measures:237x154 mm
Weight:18 g Material:0.8
mm PP (Polypropylene)
This Mudguard is great
for: Mountain and trail
riders that like to ride
dirt not eat it. Super
lightweight and easy to
keep on the bike all year
round. The Mudder
doesn’t provide full
protection it will keep
the worst of the mud off
your face Deflectors
increase efficiency Easy
to mount with included
zipties Fits all
suspension forks with a
fork bridge Super
lightweight, only 18
grams Suitable for all
wheel sizes
Availability: In Stock
£9.99
Available
-
The Crud XL Fender is the
more sophisticated bigger
brother to the Crud
Catcher. Made from
moulded plastic the XL
Fender attaches using O
rings to any front
suspension disc fork and
covers a large area of
the front wheel. No tools
needed and quick fit and
removal: rubber areas
around the fork brace and
foam where the fender
sits against the inside
of the legs, rubber
bands stretch around the
fork legs to secure it in
place making the guard
adjustable up and down to
adjust mud clearance
depending on wheel size.
This Mudguard is great
for: the Crud XL provides
great mud protection for
pretty much all
conditions apart from the
most extreme making it
equal to models that
retail at a much higher
price. Features Fits all
front suspension forks No
tools needed Guaranteed
no clogging Fits in
seconds For disc forks
only Adjustable height
Availability: In Stock
£29.99
Available
-
Super lightweight and
convenient the Ass Saver
fits neatly on the front
saddle rails under the
saddle of your bike. The
advantage with this
solution is that saddles
are more uniform in this
area and we can therefore
provide a proper fit to a
much wider range of
saddles. Attaching only
to the front rails makes
the Ass Saver
self-centring, so if you
accidently knock it, it
will regain its centred
position. Using the
origami style Patent
pending FLIP-TIP system
makes it super easy to
open up the recyclable
polypropylene AssSaver
and do exactly that.
Measuring in at 38 x 10.2
cm the AssSaver obviously
doesn’t provide full
cover but will keep the
worst of the rain and mud
off. Technical data
Measures:380x102 mm
Weight:19 g Material:0.8
mm PP (Polypropylene)
This Mudguard is great
for: For those who
don’t want full or
permanent mudguards on
their bike The Ass Saver
is designed for you to
almost forget it’s
there until you need it.
Whilst it won’t provide
complete protection from
the elements it will
deflect the worst of the
rain and mud. Features
Material: 100% recyclable
polypropylene weight: 19
grams measures: 380 x 102
mm made in Sweden new
flip tip design suitable
for tire widths between
23-35 mm
Availability: In Stock
£9.99
Available
-
Kit includes 6 strut
attachment festeners
Replacement parts for the
Approved fenders Includes
screw
Availability: In Stock
£4.99
Available
-
AssSaver Fendor Bendor
gets a dirty job done.
Developed for Gravel and
adventure bikes but due
to the width it’s also
great on CX and Mountain
bikes. Completely
self-supportedand
therefore possible to
mount on bikes without
the sideway support of
the seat stays or the
support of a brake
bridge.You could also
mount it above your
calliper brake to avoid
interference with the
brake. The Fendor Bender
comes with frame
protection stickers from
3M to ensure scratch
protection and fitting
without tools a breeze,
to virtually every bike
in just a few seconds.It
can also be mounted
directly on a seat post
(as low as possible for
best effect). The Fendor
Bendor will not fit if
you have monostay frame
or centre pull brake.
Technical data
Measures:555x80mm
(effective) Weight:61 g
Material: 1 mm PP
(Polypropylene) This
Mudguard is great for:
The Fendor Bendor is
light and easy to fit in
several locations making
it versatile Features
Easy to mount, no tools
required Perfect for
Gravel or MTB Super
lightweight, only 61
grams Longlasting,
durable materials
Suitable for tire widths
between 32-55 mm
Availability: In Stock
£14.99
Available
-
Kit includes 12 strut
adjusters;replacement
parts for the ncs
fenders;includes nut and
bolt;
Availability: In Stock
£14.99
Available
-
The Mudder is designed to
keep your eyes muck-free
as you speed through
those trails. Minimalist
clever design resulting
in a fork mounted front
mudguard with an
unobtrusive design and
unsurpassed efficiency
when it comes to keeping
your face free from dirt.
The design features
innovative tire-hugging
deflectors that can be
adjusted so virtually no
mud will pass. Flaps at
the front of the Mudder
is designed to be folded
down towards the tire for
even better protection.
Depending on your tire
clearance they may be
folded very little or
very much Designed to fit
all standard front
suspension forks with
wheel sizes between
26" to 29". If
you have a fork with an
inverted fork bridge,
like DT Swiss or Magura,
it wont fit without
modifications. Technical
data Measures:237x154 mm
Weight:18 g Material:0.8
mm PP (Polypropylene)
This Mudguard is great
for: Mountain and trail
riders that like to ride
dirt not eat it. Super
lightweight and easy to
keep on the bike all year
round. The Mudder
doesn’t provide full
protection it will keep
the worst of the mud off
your face Deflectors
increase efficiency Easy
to mount with included
zipties Fits all
suspension forks with a
fork bridge Super
lightweight, only 18
grams Suitable for all
wheel sizes
Availability: In Stock
£9.99
Available
-
AssSaver Mullet Front
Mudguard will keep your
feet dry. Fitting onto
the down tube in seconds
using a single 2-in-1
Velcro strap, no tools
are needed. Big fat
carbon frame or thin
steel frame doesnt
matter. Additional
stabilizer tabs improve
the stability of the
Mullet for rougher
terrain or conditions.
They also ensure the
Mullet is at the right
angle to be most
effective regardless of
the frame of your bike It
even has a cable routing
feature in the shape of
two small channels to let
the cables pass between
the frame and mudguard.
Compatible with most
cable combinations there
is the exception of
uncoveredcables for the
rear brake. If your bike
has mechanical disc
brakes, please make sure
your downtube brake cable
has housing before using
Mullet. Additional
stabilizer tabs improve
the stability of the
Mullet for rougher
terrain or conditions.
They also ensure the
Mullet is at the right
angle to be most
effective regardless of
the frame of your bike
Technical data Measures:
390x113 mm Weight:30 g
Material: 0.8 mm PP
(Polypropylene) This
Mudguard is great for:
The Mullet is the
addition to up the cover
your other AssSaver front
mudguard provides you
with, say when commuting
but don’t want to get
full fenders fitted. The
AssSaver range is pretty
universal and
straightforward to
identify what will fit
your bike easy to store
making its very
user-friendly and
convenient. Features
Keeps your feet dry on
wet roads Universal fit
for all bike types Cable
routing friendly Mounts
in seconds, without
tools Suitable for 23-42
mm tires
Availability: In Stock
£11.00
Available
-
Fendor Bendor Big
DetourEasy to mount, no
tools required Perfect
for Gravel or MTB Super
lightweight, only 61
grams Long lasting,
durable materials
Suitable for tire widths
between 32-55 mm Fendor
Bendor Big Detouris built
with bike packing in
mind. Made to be strong
enough to handle really
muddy conditions but
flexible enough to not
break when being
inevitably bashed around.
The width is optimized
for tire sizes commonly
used on gravel bikes.
Mounting close to the
rear tire it will protect
your saddle bag as well
as you from road muck and
water. It attaches to
virtually any bike in
seconds, without the use
of tools. Most bike
packing gear is not 100%
waterproof and a good set
of fenders can save you
from the misery of having
a wet sleeping bag or
clothes at the end of the
day. Even if your gear is
fully waterproof, you
will appreciate the lack
of mud on your bags when
you stop to get a jacket
out or when you bring
them into the tent after
a rough day in the
saddle. Thefull kit adds
less than 85 grams to
your total weight,
making it ideal for
ultralight bike packing.
Technical data Measures:
555x80 mm (effective)
Weight: 61 g Material: 1
mm PP (Polypropylene)
This Mudguard is great
for: keeping you kit dry
and mud free can make a
bike difference when bike
packing. The Big Detour
is light and easy to
store making it the
perfect edition to your
compact set of Bike
packing essential items
Features Easy to mount,
no tools required Perfect
for Gravel or MTB Super
lightweight, only 61
grams Long lasting,
durable materials
Suitable for tire widths
between 32-55 mm
Availability: In Stock
£14.50
Available
-
The AssSaver Fendor
Bendor Regular is easy to
mount, no tools
required. Perfect for
when you wish you had a
full mudguard on the bike
yet still easy to fit and
foldable enough to pop in
your jersey pocket! The
Fendor Bendor is designed
to fit smaller frames
perfect for Road or Urban
bikes. Completely
self-supportedand
therefore possible to
mount on bikes without
the sideway support of
the seat stays or the
support of a brake
bridge.You could also
mount it above your
calliper brake to avoid
interference with the
brake. The Fendor Bender
comes with frame
protection stickers from
3M to ensure scratch
protection and fitting
without tools a breeze,
to virtually every bike
in just a few seconds.It
can also be mounted
directly on a seat post
(as low as possible for
best effect). The Fendor
Bendor fits all frames
with standard seat stays
it will not fit if you
have monostay frame or
centre pull brake.
Avaliable in Black or the
striking reflective
Bicycle crumbs or Notchas
Exccelsior Technical data
· Measures:540x65 mm
(effective) · Weight:50
g · Material: 1 mm PP
(Polypropylene) This
Mudguard is great for:
The Fendor Bendor is
light and easy to fit in
several locations making
it versatile. Its design
makes it easy and great
to have to hand. Features
Easy to mount, no tools
required Fits almost all
bikes Super lightweight,
only50 grams
long-lasting, durable
materials
Availability: In Stock
£14.99
Available
-
The AssSaver Fendor
Bendor Regular is easy to
mount, no tools
required. Perfect for
when you wish you had a
full mudguard on the bike
yet still easy to fit and
foldable enough to pop in
your jersey pocket! The
Fendor Bendor is designed
to fit smaller frames
perfect for Road or Urban
bikes. Completely
self-supportedand
therefore possible to
mount on bikes without
the sideway support of
the seat stays or the
support of a brake
bridge.You could also
mount it above your
calliper brake to avoid
interference with the
brake. The Fendor Bender
comes with frame
protection stickers from
3M to ensure scratch
protection and fitting
without tools a breeze,
to virtually every bike
in just a few seconds.It
can also be mounted
directly on a seat post
(as low as possible for
best effect). The Fendor
Bendor fits all frames
with standard seat stays
it will not fit if you
have monostay frame or
centre pull brake.
Avaliable in Black or the
striking reflective
Bicycle crumbs or Notchas
Exccelsior Technical data
· Measures:540x65 mm
(effective) · Weight:50
g · Material: 1 mm PP
(Polypropylene) This
Mudguard is great for:
The Fendor Bendor is
light and easy to fit in
several locations making
it versatile. Its design
makes it easy and great
to have to hand. Features
Easy to mount, no tools
required Fits almost all
bikes Super lightweight,
only50 grams
long-lasting, durable
materials
Availability: In Stock
£14.99
Available
-
The Big AssSaver is
designed specifically for
wide tyres the extra
width obviously needed to
deflect the water and mud
Super lightweight and
convenient the Ass Saver
fits neatly on the front
saddle rails under the
saddle of your bike. The
advantage with this
solution is that saddles
are more uniform in this
area and we can therefore
provide a proper fit to a
much wider range of
saddles. Attaching only
to the front rails makes
the Ass Saver
self-centring, so if you
accidently knock it, it
will regain its centred
position. Using the
origami style Patent
pending FLIP-TIP system
makes it super easy to
open up the recyclable
polypropylene AssSaver
and do exactly that.
Measuring in at 383x115.5
mm the AssSaver obviously
doesn’t provide full
cover but will keep the
worst of the rain and mud
off. Technical data
Measures:383x115.5 mm
Weight:25.5 g
Material:0.8 mm PP
(Polypropylene) This
Mudguard is great for:
For those big wheeled
trail riders who don’t
want full or permanent
mudguards on their bike
The Ass Saver is designed
for you to almost forget
it’s there until you
need it. Whilst it
won’t provide complete
protection from the
elements it will deflect
the worst of the rain and
mud. Features Easy to
mount, requires no tools
New patented FLIP-TIP
attachment system Fits
every standard rail
saddle, also with carbon
rails Suitable for tire
widths between 30-50 mm
Great for gravel
Availability: In Stock
£9.99
Available
-
The Mudder is designed to
keep your eyes muck-free
as you speed through
those trails. Minimalist
clever design results in
a fork mounted front
mudguard with an
unobtrusive design and
unsurpassed efficiency
when it comes to keeping
your face free from dirt.
The design features
innovative tire-hugging
deflectors that can be
adjusted so virtually no
mud will pass. Flaps at
the front of the Mudder
is designed to be folded
down towards the tire for
even better protection.
Depending on your tire
clearance they may be
folded very little or
very much Designed to fit
all standard front
suspension forks with
wheel sizes between
26" to 29". If
you have a fork with an
inverted fork bridge,
like DT Swiss or Magura,
it wont fit without
modifications. Technical
data Measures:237x154 mm
Weight:18 g Material:0.8
mm PP (Polypropylene)
This Mudguard is great
for: Mountain and trail
riders that like to ride
dirt not eat it. Super
lightweight and easy to
keep on the bike all year
round. The Mudder
doesn’t provide full
protection it will keep
the worst of the mud off
your face Deflectors
increase efficiency Easy
to mount with included
zipties Fits all
suspension forks with a
fork bridge Super
lightweight, only 18
grams Suitable for all
wheel sizes
Availability: In Stock
£9.99
Available
-
The AssSaver Fendor
Bendor Regular is easy to
mount, no tools
required. Perfect for
when you wish you had a
full mudguard on the bike
yet still easy to fit and
foldable enough to pop in
your jersey pocket! The
Fendor Bendor is designed
to fit smaller frames
perfect for Road or Urban
bikes. Completely
self-supportedand
therefore possible to
mount on bikes without
the sideway support of
the seat stays or the
support of a brake
bridge.You could also
mount it above your
calliper brake to avoid
interference with the
brake. The Fendor Bender
comes with frame
protection stickers from
3M to ensure scratch
protection and fitting
without tools a breeze,
to virtually every bike
in just a few seconds.It
can also be mounted
directly on a seat post
(as low as possible for
best effect). The Fendor
Bendor fits all frames
with standard seat stays
it will not fit if you
have monostay frame or
centre pull brake.
Avaliable in Black or the
striking reflective
Bicycle crumbs or Notchas
Exccelsior Technical data
· Measures:540x65 mm
(effective) · Weight:50
g · Material: 1 mm PP
(Polypropylene) This
Mudguard is great for:
The Fendor Bendor is
light and easy to fit in
several locations making
it versatile. Its design
makes it easy and great
to have to hand. Features
Easy to mount, no tools
required Fits almost all
bikes Super lightweight,
only50 grams
long-lasting, durable
materials
Availability: In Stock
£14.99
Available
-
AssSaver Mudder Mini
Detour is built with Bike
packing in mind coming in
at a super lightweight 21
grams the Mini Detour is
made from long lasting,
durable materials.
Suitable for tire widths
between 32-55 mm. Perfect
for protect your face
handlebars and saddlebag
from mud and water. It
attaches to the bike in
seconds, without the
need of tools, made to
fit any gravel/cx forks
with clearance. The
adjustable anti slip hook
and loop straps enable
you to ensure the fit is
firm stopping any
slippage. Most bike
packing gear is not 100%
waterproof and a good set
of fenders can save you
from the misery of having
a wet sleeping bag or
clothes at the end of the
day. Even if your gear is
fully waterproof, you
will appreciate the lack
of mud on your bags when
you stop to get a jacket
out or when you bring
them into the tent after
a rough day in the
saddle. Technical data
Measures:90 x170 mm
(effective) Weight:21 g
Material:0.8 mm PP
(Polypropylene) This
Mudguard is great for:
keeping you kit dry and
mud free can make a bike
difference when bike
packing. The Big Detour
is light and easy to
store making it the
perfect edition to your
compact set of Bike
packing essential items
Features Protecting face
and headset bearings
Mounts easy and securely
with ant slip straps Fits
all stiff cross/gravel
forks Super lightweight,
only21 grams Keeps spray
from you handlebar bags
Availability: In Stock
£12.00
Available
-
The Mudder is designed to
keep your eyes muck-free
as you speed through
those trails. Minimalist
clever design resulting
in a fork mounted front
mudguard with an
unobtrusive design and
unsurpassed efficiency
when it comes to keeping
your face free from dirt.
The design features
innovative tire-hugging
deflectors that can be
adjusted so virtually no
mud will pass. Flaps at
the front of the Mudder
is designed to be folded
down towards the tire for
even better protection.
Depending on your tire
clearance they may be
folded very little or
very much Designed to fit
all standard front
suspension forks with
wheel sizes between
26" to 29". If
you have a fork with an
inverted fork bridge,
like DT Swiss or Magura,
it wont fit without
modifications. Technical
data Measures:237x154 mm
Weight:18 g Material:0.8
mm PP (Polypropylene)
This Mudguard is great
for: Mountain and trail
riders that like to ride
dirt not eat it. Super
lightweight and easy to
keep on the bike all year
round. The Mudder
doesn’t provide full
protection it will keep
the worst of the mud off
your face Deflectors
increase efficiency Easy
to mount with included
zipties Fits all
suspension forks with a
fork bridge Super
lightweight, only 18
grams Suitable for all
wheel sizes
Availability: In Stock
£9.99
Available
-
The AssSaver teamed up
with Valencia-based
artist and illustrator
ENISAURUS to create the
Boom Room. Featuring
Illustration designed
around a concept of the
centre of the universe,
encountering hostile
alien blobs, planet
bubbles and time warps.
The Boom Room AssSaver is
designed specifically for
wide tyres the extra
width obviously needed to
deflect the water and
mud. Super lightweight
and convenient the Ass
Saver fits neatly on the
front saddle rails under
the saddle of your bike.
The advantage with this
solution is that saddles
are more uniform in this
area and we can therefore
provide a proper fit to a
much wider range of
saddles. Attaching only
to the front rails makes
the Ass Saver
self-centring, so if you
accidently knock it, it
will regain its centred
position. Using the
origami style Patent
pending FLIP-TIP system
makes it super easy to
open up the recyclable
polypropylene AssSaver
and do exactly that.
Measuring in at 383x115.5
mm the AssSaver obviously
doesn’t provide full
cover but will keep the
worst of the rain and mud
off. Technical data
Measures:383x115.5 mm
Weight:25.5 g
Material:0.8 mm PP
(Polypropylene) This
Mudguard is great for:
For those big wheeled
trail riders who don’t
want full or permanent
mudguards on their bike
The Ass Saver is designed
for you to almost forget
it’s there until you
need it. Whilst it
won’t provide complete
protection from the
elements it will deflect
the worst of the rain and
mud. Features Easy to
mount, requires no tools
New patented FLIP-TIP
attachment system Fits
every standard rail
saddle, also with carbon
rails Suitable for tire
widths between 30-50 mm
Great for gravel
Availability: In Stock
£9.99
Available
-
Super lightweight and
convenient the Ass Saver
fits neatly on the front
saddle rails under the
saddle of your bike. The
advantage with this
solution is that saddles
are more uniform in this
area and we can therefore
provide a proper fit to a
much wider range of
saddles. Attaching only
to the front rails makes
the Ass Saver
self-centring, so if you
accidently knock it, it
will regain its centred
position. Using the
origami style Patent
pending FLIP-TIP system
makes it super easy to
open up the recyclable
polypropylene AssSaver
and do exactly that.
Measuring in at 38 x 10.2
cm the AssSaver obviously
doesn’t provide full
cover but will keep the
worst of the rain and mud
off. Technical data
Measures:380x102 mm
Weight:19 g Material:0.8
mm PP (Polypropylene)
This Mudguard is great
for: For those who
don’t want full or
permanent mudguards on
their bike The Ass Saver
is designed for you to
almost forget it’s
there until you need it.
Whilst it won’t provide
complete protection from
the elements it will
deflect the worst of the
rain and mud. Features
Material: 100% recyclable
polypropylene weight: 19
grams measures: 380 x 102
mm made in Sweden new
flip tip design suitable
for tire widths between
23-35 mm
Availability: In Stock
£9.99
Available
-
Specialized Dry Tech set
700c designed to be light
using multi-material
design to ensure
they’re tough where
they need to be and light
everywhere else.
Heat-treated,
lightweight aluminium
fender stays with
stainless steel hardware
make these mudguards
sleek and stylish.
Engineered in the
Specialized wind tunnel
to improve the protection
and minimise spray.
Available in three
different sizes (35, 45,
and 52mm), and theyre
designed to work on bikes
with 700C wheels—with
or without Specialized
Plug + Play frame
mounting. This mudguard
is perfect for: designed
to be as light as
possible coupled with the
reduced spray make these
perfect for club rides
Features Engineered
fender set with extended,
research-based length
for superior water
protection. Lightweight,
yet highly durable
multi-material design.
Engineered in our Win
Tunnel to improve
protection and minimize
water spray. Designed to
work on bikes with 700C
wheels and with or
without Specialized Plug
+ Play frame mounting.
Heat-treated,
lightweight aluminium
fender stays with
stainless steel hardware.
Availability: In Stock
£65.00
Available
-
The Big AssSaver is
designed specifically for
wide tyres the extra
width obviously needed to
deflect the water and mud
Super lightweight and
convenient the Ass Saver
fits neatly on the front
saddle rails under the
saddle of your bike. The
advantage with this
solution is that saddles
are more uniform in this
area and we can therefore
provide a proper fit to a
much wider range of
saddles. Attaching only
to the front rails makes
the Ass Saver
self-centring, so if you
accidently knock it, it
will regain its centred
position. Using the
origami style Patent
pending FLIP-TIP system
makes it super easy to
open up the recyclable
polypropylene AssSaver
and do exactly that.
Measuring in at 383x115.5
mm the AssSaver obviously
doesn’t provide full
cover but will keep the
worst of the rain and mud
off. Technical data
Measures:383x115.5 mm
Weight:25.5 g
Material:0.8 mm PP
(Polypropylene) This
Mudguard is great for:
For those big wheeled
trail riders who don’t
want full or permanent
mudguards on their bike
The Ass Saver is designed
for you to almost forget
it’s there until you
need it. Whilst it
won’t provide complete
protection from the
elements it will deflect
the worst of the rain and
mud. Features Easy to
mount, requires no tools
New patented FLIP-TIP
attachment system Fits
every standard rail
saddle, also with carbon
rails Suitable for tire
widths between 30-50 mm
Great for gravel
Availability: In Stock
£9.99
Denmark