mil Kit Tubeless sealing tape. mil Kit took their time, scouring the globe for the highest quality, easiest to use & most durable tubeless rim tape out there. After much testing, they settled upon a small manufacturer in Taiwan who was able to produce a tape that exceeded mil Kit's stringent standards for adherence, sealing, durability & ease of use. The tape comes in a 10-metre roll, enough for 4
- 5 wheels & comes in different width tape for different internal rim widths To help you select which tape you need here is a guide: 18 -20 mm internal = 21 mm tape, 22 -25 mm internal = 25 mm tape, 26
- 28 mm internal = 29 mm tape, 29
- 31 mm internal = 32 mm tape. For the best possible seal, please clean the rim thoroughly before applying & keep the tape tight as you install it to prevent wrinkles. Easy to remove, leaves no hard-to-clean residue behind. Rider-designed in Switzerl&, made in Taiwan by experts.


...

mil Kit tyre sealant, the clever minds at mil Kit have developed a tubeless sealant to complement their family of intelligent tubeless solutions. Based on a synthetic latex, mil Kit's sealant is longer lasting than standard latex-based mixtures, is CO2 friendly & won't create sealant balls inside your tyres. Aramid fibres are held in suspension within the fluid, these rush to damaged areas & greatly enhance the performance of the sealant on larger holes. Aramid fibres also create a physical barrier that works better at a higher pressure than sealant alone, making this sealant suitable for both MTB & Road use. The sealant is also non-corrosive, hypoallergenic & ammonia-free, it can be rinsed off with water & will not damage your paintwork or components. Developed & tested for over a year by multiple UCI World Cup teams & proven at the highest levels of competition. If adding to a tyre that has been used with other sealants, please remove all liquid sealant from the tyre, rinse with clean water & allow to dry before adding mil Kit sealant to assure the best performance. Fully compatible with mil Kit valves, as you'd expect, Effective at temperatures from
- 20 to + 50°C. Recommended quantities: 40 ml
- Road, 50 ml
- Gravel, 100 ml
- 27.5" MTB, 120 ml
- 29" or 27"+ MTB




...

mil Kit tyre sealant, the clever minds at mil Kit have developed a tubeless sealant to complement their family of intelligent tubeless solutions. Based on a synthetic latex, mil Kit's sealant is longer lasting than standard latex-based mixtures, is CO2 friendly & won't create sealant balls inside your tyres. Aramid fibres are held in suspension within the fluid, these rush to damaged areas & greatly enhance the performance of the sealant on larger holes. Aramid fibres also create a physical barrier that works better at a higher pressure than sealant alone, making this sealant suitable for both MTB & Road use. The sealant is also non-corrosive, hypoallergenic & ammonia-free, it can be rinsed off with water & will not damage your paintwork or components. Developed & tested for over a year by multiple UCI World Cup teams & proven at the highest levels of competition. If adding to a tyre that has been used with other sealants, please remove all liquid sealant from the tyre, rinse with clean water & allow to dry before adding mil Kit sealant to assure the best performance. Fully compatible with mil Kit valves, as you'd expect, Effective at temperatures from
- 20 to + 50°C. Recommended quantities: 40 ml
- Road, 50 ml
- Gravel, 100 ml
- 27.5" MTB, 120 ml
- 29" or 27"+ MTB




...

mil Kit tyre sealant 1ltr, the clever minds at mil Kit have developed a tubeless sealant to complement their family of intelligent tubeless solutions. Based on a synthetic latex, mil Kit's sealant is longer lasting than standard latex-based mixtures, is CO2 friendly & won't create sealant balls inside your tyres. Aramid fibres are held in suspension within the fluid, these rush to damaged areas & greatly enhance the performance of the sealant on larger holes. Aramid fibres also create a physical barrier that works better at a higher pressure than sealant alone, making this sealant suitable for both MTB & Road use. The sealant is also non-corrosive, hypoallergenic & ammonia-free, it can be rinsed off with water & will not damage your paintwork or components. Developed & tested for over a year by multiple UCI World Cup teams & proven at the highest levels of competition. If adding to a tyre that has been used with other sealants, please remove all liquid sealant from the tyre, rinse with clean water & allow to dry before adding mil Kit sealant to assure the best performance. Fully compatible with mil Kit valves, as you'd expect, Effective at temperatures from
- 20 to + 50°C. Recommended quantities: 40 ml
- Road, 50 ml
- Gravel, 100 ml
- 27.5" MTB, 120 ml
- 29" or 27"+ MTB




...

mil Kit Valve 1 Pair for use when you want to fit the system to multiple bikes but already have the injector. Available in 35, 45, 55 or 75 mm lengths for different depth rims. milkit's unique valve won't clog & does not release pressure when the core is removed so awkward tyres are easier to inflate & keep inflated; this also means a damaged valve, no longer means an end to your ride. The unique system also means that you can accurately check & top up sealant without removing the tyre, no more spills. Your tyres can also be changed without wasting sealant. ...

mil Kit Valve 1 Pair for use when you want to fit the system to multiple bikes but already have the injector. Available in 35, 45, 55 or 75 mm lengths for different depth rims. milkit's unique valve won't clog & does not release pressure when the core is removed so awkward tyres are easier to inflate & keep inflated; this also means a damaged valve, no longer means an end to your ride. The unique system also means that you can accurately check & top up sealant without removing the tyre, no more spills. Your tyres can also be changed without wasting sealant. ...

mil Kit Valve 1 Pair for use when you want to fit the system to multiple bikes but already have the injector. Available in 35, 45, 55 or 75 mm lengths for different depth rims. milkit's unique valve won't clog & does not release pressure when the core is removed so awkward tyres are easier to inflate & keep inflated; this also means a damaged valve, no longer means an end to your ride. The unique system also means that you can accurately check & top up sealant without removing the tyre, no more spills. Your tyres can also be changed without wasting sealant. ...

A Pair of replacement mil Kit cores available in 35, 45, 55 or 75 mm lengths to suit the appropriate valve. ...

A Pair of replacement mil Kit cores available in 35, 45, 55 or 75 mm lengths to suit the appropriate valve. ...

A Pair of replacement mil Kit cores available in 35, 45, 55 or 75 mm lengths to suit the appropriate valve. ...