The Cannondale F-SI Hi-Mod World Cup 2019 Mountain Bike lets you ride the same bike as the Cannondale pro team. The F-SI World Cup uses Cannondale’s Hi-Mod carbon which they reserve for their best bikes. It’s stiffer than their normal carbon mix allowing them to use less of it to achieve the same strength bike. The result is a frame that weighs in at just 900g. Cannondale have paired Hi-Mod their carbon frame with a carbon Lefty Ocho that’s 300g lighter than the standard version. The F-SI is all about pushing the limits of what an XC hardtail can do. No other hardtail descends as fast, climbs as nimbly, or kicks harder, smoother. The F-SI is super light but that’s almost a by-product of what Cannondale were aiming for with the F-Si. The Cannondale engineers focused on features that deliver real performance benefits out on the course. Features like Ai & Out Front, or enhanced compliance, or enhanced durability. That’s what wins races, not saving the weight of a few sips of water. Cannondale’s AI tech features on a lot of their road & mountain bikes. It makes the backend of the bike asymmetrical with an offset drivetrain. This allows them to make the back end of the bike much shorter which translates to better acceleration, better traction & more agile handling. The all-new Lefty Ocho fork floats through chop & steers through the choss like nothing else. Its extra-long fork offset pairs up with the F-Si’s new, slacker 69° head angle to create the Out Front geometry that gives you extra stability to charge the downs, with full XC agility on the ups. Helping the F-Si track perfectly through whatever you throw it into. The F-SI is designed as an XC race bike & it does have a race orientated ride position but this bike also works great for any fast cross country riding. If you focus more on speed & distance covered rather than being gnarly then this could be the bike for you. The F-SI Hi-Mod World Cup comes with ENVE carbon wheels, a mix of SRAM X01 & XX1 gearing & SRAM Level Ultimate hydraulic brakes. the complete bike comes in at 8.4kg. This bike is perfect for World Cup XC racers, marathon & endurance racers, or anyone who just likes going really fast cross country. The Cannondale F-SI Hi-Mod World Cup lets you race on the same bike as the pros so there’s no excuses if you don’t win every race! Key Features Hi-MOD Ballistec carbon frame with super short AI offset rear end All new Carbon Lefty Ocho 100mm travel fork with lockout Tubeless ready carbon 29er wheels & SRAM equipment ...

The Cannondale F-SI Hi-Mod World Cup 2019 Mountain Bike lets you ride the same bike as the Cannondale pro team. The F-SI World Cup uses Cannondale’s Hi-Mod carbon which they reserve for their best bikes. It’s stiffer than their normal carbon mix allowing them to use less of it to achieve the same strength bike. The result is a frame that weighs in at just 900g. Cannondale have paired Hi-Mod their carbon frame with a carbon Lefty Ocho that’s 300g lighter than the standard version. The F-SI is all about pushing the limits of what an XC hardtail can do. No other hardtail descends as fast, climbs as nimbly, or kicks harder, smoother. The F-SI is super light but that’s almost a by-product of what Cannondale were aiming for with the F-Si. The Cannondale engineers focused on features that deliver real performance benefits out on the course. Features like Ai & Out Front, or enhanced compliance, or enhanced durability. That’s what wins races, not saving the weight of a few sips of water. Cannondale’s AI tech features on a lot of their road & mountain bikes. It makes the backend of the bike asymmetrical with an offset drivetrain. This allows them to make the back end of the bike much shorter which translates to better acceleration, better traction & more agile handling. The all-new Lefty Ocho fork floats through chop & steers through the choss like nothing else. Its extra-long fork offset pairs up with the F-Si’s new, slacker 69° head angle to create the Out Front geometry that gives you extra stability to charge the downs, with full XC agility on the ups. Helping the F-Si track perfectly through whatever you throw it into. The F-SI is designed as an XC race bike & it does have a race orientated ride position but this bike also works great for any fast cross country riding. If you focus more on speed & distance covered rather than being gnarly then this could be the bike for you. The F-SI Hi-Mod World Cup comes with ENVE carbon wheels, a mix of SRAM X01 & XX1 gearing & SRAM Level Ultimate hydraulic brakes. the complete bike comes in at 8.4kg. This bike is perfect for World Cup XC racers, marathon & endurance racers, or anyone who just likes going really fast cross country. The Cannondale F-SI Hi-Mod World Cup lets you race on the same bike as the pros so there’s no excuses if you don’t win every race! Key Features Hi-MOD Ballistec carbon frame with super short AI offset rear end All new Carbon Lefty Ocho 100mm travel fork with lockout Tubeless ready carbon 29er wheels & SRAM equipment ...

Cannondale Flash/ Scalpel/F-SI/CAADX Derailleur Hanger. Product code:KP121/. This is an official Cannondale spare part which fits a range of Cannondale bikes including the Flash & F-SI models: Brand Model Year Rear Hanger Cannondale F29 2015 KP121/ Cannondale Flash 29er (Carbon) 2011 KP121/ Cannondale Flash 29er (Carbon) 2012 KP121/ Cannondale F-Si 29 2016 KP121/ Cannondale F-Si 29 2017 KP121/ Cannondale F-Si 29 2018 KP121/ Cannondale F-Si 29 Alloy 2016 KP121/ Cannondale F-Si 29 Alloy 2017 KP121/ Cannondale Scalpel 2011 KP121/ ...

Cannondales GT-40 bottle cage is a super minimalist but super functional design. It comes with a lightweight & durable heat-treated aluminium construction while the wrap-around coverage ensures positive bottle grip. The Cannondale GT-40 bottle cage can be used on all types of bikes & weighs in at just 42g. ...

Cannondales GT-40 bottle cage is a super minimalist but super functional design. It comes with a lightweight & durable heat-treated aluminium construction while the wrap-around coverage ensures positive bottle grip. The Cannondale GT-40 bottle cage can be used on all types of bikes & weighs in at just 42g. ...

The Cannondale Jekyll 27.5 2 2019 Mountain Bike is a mid-range enduro bike with a carbon frame & aluminium swing arm. With 170mm of travel & agile 27.5” wheels the Jekyll 27.5 works for enduro racing & all mountain riding over the most technical terrain. The Jekyll 27.5 2 comes with a Ballistec carbon frame & Smartform Aluminium swing arm. The two are connected by the Lock R thru-axle pivot which creates a rock solid connection for added stability. In common with a lot of Cannondale’s other bikes the Jekyll uses Asymmetric Integration (Ai), which basically translates to the back end of the bike being asymmetric. This delivers some of the shortest stays on the market to give more tyre clearance & frame stiffness than even Boost frames can muster. Plus a rear wheel that’s stiffer & stronger thanks to the Ai even-dish build. It all adds up to the kind of agility & traction that has to be ridden to be believed. The Leveraged Single Pivot gives optimal suspension response throughout the stroke & keeps the suspension active under braking, while retaining the stiffness, durability & reliability of a single pivot design. Co-developed with Fox, the Gemini system adds two ride modes (Hustle & Flow) to the Fox shocks. Flip to Hustle to shorten the travel & ramp up the spring rate for a snappier, more responsive feel for pumping through turns, sprints & traction-challenged climbs. Flip back to Flow for full Fox travel when things get rough. The Jekyll 27.5” 2 comes with Fox Float Performance Elite shocks, tubeless ready wheels, SRAM Guide brakes & SRAM X01 Eagle gearing. This bike is perfect for Enduro racers & all mountain riders who prefer the agility of 27.5” wheels. With a carbon frame & SRAM X01 gearing this bike is ready to race or to tackle the toughest trails you can find. Key Features Carbon frame & aluminium swingarm held together by Lock R thru-axle Custom tuned Gemini suspension, co-developed with Fox Tubeless ready wheels, dropper post & SRAM Eagle gearing ...

The Cannondale Jekyll 27.5 2 2019 Mountain Bike is a mid-range enduro bike with a carbon frame & aluminium swing arm. With 170mm of travel & agile 27.5” wheels the Jekyll 27.5 works for enduro racing & all mountain riding over the most technical terrain. The Jekyll 27.5 2 comes with a Ballistec carbon frame & Smartform Aluminium swing arm. The two are connected by the Lock R thru-axle pivot which creates a rock solid connection for added stability. In common with a lot of Cannondale’s other bikes the Jekyll uses Asymmetric Integration (Ai), which basically translates to the back end of the bike being asymmetric. This delivers some of the shortest stays on the market to give more tyre clearance & frame stiffness than even Boost frames can muster. Plus a rear wheel that’s stiffer & stronger thanks to the Ai even-dish build. It all adds up to the kind of agility & traction that has to be ridden to be believed. The Leveraged Single Pivot gives optimal suspension response throughout the stroke & keeps the suspension active under braking, while retaining the stiffness, durability & reliability of a single pivot design. Co-developed with Fox, the Gemini system adds two ride modes (Hustle & Flow) to the Fox shocks. Flip to Hustle to shorten the travel & ramp up the spring rate for a snappier, more responsive feel for pumping through turns, sprints & traction-challenged climbs. Flip back to Flow for full Fox travel when things get rough. The Jekyll 27.5” 2 comes with Fox Float Performance Elite shocks, tubeless ready wheels, SRAM Guide brakes & SRAM X01 Eagle gearing. This bike is perfect for Enduro racers & all mountain riders who prefer the agility of 27.5” wheels. With a carbon frame & SRAM X01 gearing this bike is ready to race or to tackle the toughest trails you can find. Key Features Carbon frame & aluminium swingarm held together by Lock R thru-axle Custom tuned Gemini suspension, co-developed with Fox Tubeless ready wheels, dropper post & SRAM Eagle gearing ...

The Cannondale Jekyll 27.5 2 2019 Mountain Bike is a mid-range enduro bike with a carbon frame & aluminium swing arm. With 170mm of travel & agile 27.5” wheels the Jekyll 27.5 works for enduro racing & all mountain riding over the most technical terrain. The Jekyll 27.5 2 comes with a Ballistec carbon frame & Smartform Aluminium swing arm. The two are connected by the Lock R thru-axle pivot which creates a rock solid connection for added stability. In common with a lot of Cannondale’s other bikes the Jekyll uses Asymmetric Integration (Ai), which basically translates to the back end of the bike being asymmetric. This delivers some of the shortest stays on the market to give more tyre clearance & frame stiffness than even Boost frames can muster. Plus a rear wheel that’s stiffer & stronger thanks to the Ai even-dish build. It all adds up to the kind of agility & traction that has to be ridden to be believed. The Leveraged Single Pivot gives optimal suspension response throughout the stroke & keeps the suspension active under braking, while retaining the stiffness, durability & reliability of a single pivot design. Co-developed with Fox, the Gemini system adds two ride modes (Hustle & Flow) to the Fox shocks. Flip to Hustle to shorten the travel & ramp up the spring rate for a snappier, more responsive feel for pumping through turns, sprints & traction-challenged climbs. Flip back to Flow for full Fox travel when things get rough. The Jekyll 27.5” 2 comes with Fox Float Performance Elite shocks, tubeless ready wheels, SRAM Guide brakes & SRAM X01 Eagle gearing. This bike is perfect for Enduro racers & all mountain riders who prefer the agility of 27.5” wheels. With a carbon frame & SRAM X01 gearing this bike is ready to race or to tackle the toughest trails you can find. Key Features Carbon frame & aluminium swingarm held together by Lock R thru-axle Custom tuned Gemini suspension, co-developed with Fox Tubeless ready wheels, dropper post & SRAM Eagle gearing ...

The Cannondale Jekyll 27.5 4 2019 Mountain Bike is entry level enduro bike. With 170mm of travel & agile 27.5” wheels the Jekyll 27.5 works for enduro racing & all mountain riding over the most technical terrain. The Jekyll 27.5 4 comes with a Smrtform aluminium frame & swing arm. The two are connected by the Lock R thru-axle pivot which creates a rock solid connection for added stability. In common with a lot of Cannondale’s other bikes the Jekyll uses Asymmetric Integration (Ai), which basically translates to the back end of the bike being asymmetric. This delivers some of the shortest stays on the market to give more tyre clearance & frame stiffness than even Boost frames can muster. Plus a rear wheel that’s stiffer & stronger thanks to the Ai even-dish build. It all adds up to the kind of agility & traction that has to be ridden to be believed. The Leveraged Single Pivot gives optimal suspension response throughout the stroke & keeps the suspension active under braking, while retaining the stiffness, durability & reliability of a single pivot design. Co-developed with Fox, the Gemini system adds two ride modes (Hustle & Flow) to the Fox shocks. Flip to Hustle to shorten the travel & ramp up the spring rate for a snappier, more responsive feel for pumping through turns, sprints & traction-challenged climbs. Flip back to Flow for full Fox travel when things get rough. The Jekyll 27.5” 4 comes with Fox Float shocks, Shimano SLX gearing & Shimano Deore brakes. This is a really capable bike built with solid equipment that does what it is suppose to without breaking the bank. This bike is perfect for Enduro racers & all mountain riders who prefer the agility of 27.5” wheels. With an aluminium frame & affordable Shimano kit this is a lot of bike for not a lot of money. Key Features Aluminium & swing arm held together by Lock R thru-axle Custom tuned Gemini suspension, co-developed with Fox Tubeless ready wheels, dropper post & Shimano SLX equipment ...

The Cannondale Jekyll 27.5 4 2019 Mountain Bike is entry level enduro bike. With 170mm of travel & agile 27.5” wheels the Jekyll 27.5 works for enduro racing & all mountain riding over the most technical terrain. The Jekyll 27.5 4 comes with a Smrtform aluminium frame & swing arm. The two are connected by the Lock R thru-axle pivot which creates a rock solid connection for added stability. In common with a lot of Cannondale’s other bikes the Jekyll uses Asymmetric Integration (Ai), which basically translates to the back end of the bike being asymmetric. This delivers some of the shortest stays on the market to give more tyre clearance & frame stiffness than even Boost frames can muster. Plus a rear wheel that’s stiffer & stronger thanks to the Ai even-dish build. It all adds up to the kind of agility & traction that has to be ridden to be believed. The Leveraged Single Pivot gives optimal suspension response throughout the stroke & keeps the suspension active under braking, while retaining the stiffness, durability & reliability of a single pivot design. Co-developed with Fox, the Gemini system adds two ride modes (Hustle & Flow) to the Fox shocks. Flip to Hustle to shorten the travel & ramp up the spring rate for a snappier, more responsive feel for pumping through turns, sprints & traction-challenged climbs. Flip back to Flow for full Fox travel when things get rough. The Jekyll 27.5” 4 comes with Fox Float shocks, Shimano SLX gearing & Shimano Deore brakes. This is a really capable bike built with solid equipment that does what it is suppose to without breaking the bank. This bike is perfect for Enduro racers & all mountain riders who prefer the agility of 27.5” wheels. With an aluminium frame & affordable Shimano kit this is a lot of bike for not a lot of money. Key Features Aluminium & swing arm held together by Lock R thru-axle Custom tuned Gemini suspension, co-developed with Fox Tubeless ready wheels, dropper post & Shimano SLX equipment ...