The Nite Rider Solas 250 uses two powerful LEDs to produce an amazing 250 lumens of light output. It features 4 modes (2 flash / 2 steady) & is USB (Universal Serial Bus) rechargeable. It also featuresl Group Ride Mode for cyclists who want to stay visible but not distract others in the pack. Daylight Visible Flash (DVF) 250 lumen super bright tail light Group Ride Mode be seen without distracting fellow cyclists Easy on & off seat post strap mount with quick release tab Convenient USB (Universal Serial Bus) rechargeable Super bright daytime flash mode Be Seen by cars = Be Safe FL1 Standard IP64, dust & water-resistant Lumen Output:250 Run Time:4:30 40:00hrs Charge Time:4:00hrs Weight:82g Battery: Li-Po ...

The Niterider Swift 300 / Sabre 80 Light Set

Includes:: front & rear USB (Universal Serial Bus) rechargeable

...

The Nite Rider® Swift 300 delivers everyday reliable performance in an economical ultra compact head light. Sporting features like an easy on & off handlebar strap mount, low battery indicator & to top it off, its USB (Universal Serial Bus) Rechargeable; making it the perfect light of choice for commuters & cycling enthusiasts. Although small in size, make no mistake; the Swift 300 packs a big punch with a maximum light output of 300 lumens! Powered by an internal Lithium Ion battery, in Walk Mode, the Swift 300 can run for up to twenty-seven hours before it needs a charge. Highly durable design made with fiberglass reinforced plastic Smooth 300 lumen beam pattern in an ultra compact & lightweight design Innovative Collimator Lens optimizes your field of view Built-in, easy on & off handlebar strap mount 4 Light Levels plus 1 Daylight Flash Mode Fuel Gauge / Battery Level Indicator FL1 Standard IP64, dust & water-resistant Convenient USB (Universal Serial Bus) rechargeable Lumen Output:300 Run Time:1:30 25:00hrs Quick Charge Time:2:00hrs at 1 Amp Normal Charge Time:3:15hrs at 500m A Weight:82g Battery: Li-Ion ...

The Niterider Swift 500 / Sabre 80 Lightset is a compact & affordable lightset for cyclists & commuters who need lights they can quickly put on, & take off the bike. Equipped with strap mounts & USB (Universal Serial Bus) rechargeable these are perfect hassle free & affordable lights that will help make sure you are always visible to other road users. Niterider Swift 500 Front Light The Nite Rider® Swift 500 delivers everyday reliable performance in an economical ultra compact head light. Sporting features like an easy on & off handlebar strap mount, low battery indicator & to top it off, its USB (Universal Serial Bus) Rechargeable; making it the perfect light of choice for commuters & cycling enthusiasts. Although small in size, make no mistake; the Swift 500 packs a big punch with a maximum light output of 500 lumens! Powered by an internal Lithium Ion battery, in Walk Mode, the Swift 500 can run for up to twenty-five hours before it needs a charge. Highly durable design made with fiberglass reinforced plastic Smooth 500 lumen beam pattern in an ultra compact & lightweight design Innovative Collimator Lens optimizes your field of view Built-in, easy on & off handlebar strap mount 4 Light Levels plus 1 Daylight Flash Mode Fuel Gauge / Battery Level Indicator FL1 Standard IP64, dust & water-resistant Convenient USB (Universal Serial Bus) rechargeable Lumen Output:500 Run Time:1:30 25:00hrs Quick Charge Time:2:00hrs at 1 Amp Normal Charge Time:3:15hrs at 500m A Weight:82g Battery: Li-Ion Niterider Sabre 80 Rear Light The Nite Rider® Sabre 80 is a super bright, lightweight USB (Universal Serial Bus) rechargeable LED tail light. It utilizes a multi LED array designed for eye catching visibility in both day & night. With the addition of amber colored side lights, the Sabre 80 provides 180 degrees of protection. Daylight Visible Flash (DVF) 80 lumen super bright tail light Easy on & off seat post strap mount with quick release tab Amber side lights for 180 degrees of visibility Convenient USB (Universal Serial Bus) rechargeable Be Seen by cars = Be Safe FL1 Standard IP64, water resistant Lumen Output:80 Run Time :1:30 10:30hrs Charge Time:1:30hrs Weight:28g Battery: Li-Po ...

Niterider Taillight Strap Mount (with Aero Post Groove) The Nite Rider® Adjustable Angle Tail Light Strap Mount was specifically designed for Niteridersflagship tail light, the Sentinel. It means that you can fine tune the mounting angle of the light to display the projected Laser Lanes even & parallel on the ground. Its an easy on & off non-slip tail light mount that also features a grooved contact pad that makes this the go to mount for riders using aero seat posts. SYSTEM COMPATIBILITY Niterider Sentinel Niterider Solas Niterider Sabre Niterider Cherry Bomb ...

The Nite Rider® Tail Light Strap Mount allows for quick installation & fitment on to standard seat posts. It features a quick release tab that means that you can remove just your tail light, leaving the strap mount installed on the seat post; ideal for when you leave your bike unattended or when its time for a recharge. WARRANTY This Nite Rider® accessory is backed by Nite Riders lifetime warranty that covers any defects in material & workmanship. ACCESSORY

Includes:: Tail Light Strap Mount

...

The Niterider TL 5.0 SL has five ultra-bright LEDs with four different operating modes, including three different flash modes. The amber Side Lights help to provide even more visibility from the sides of the rider. The TL 5.0 SL will help keep you safe & seen from behind (180-degree visibility). The TL 5.0 SL operates on 2 AAA batteries (included) for up to 100 hours on flash. 5 Ultra Bright LEDs 100 hours run time Inexpensive high-quality light Super bright day time flash mode 4 operating modes Runs on AAA batteries FL 1 Standard IP64, water resistant Lumen Output:10 Run Time: Up to 100hrs Weight:70g Battery: Alkaline AAA x 2 ...

Niterider In-vehicle charging adapter for charging USB (Universal Serial Bus) rechargeable batteries. SYSTEM COMPATIBILITY Niterider Lumina Series Niterider Mi Newt Cordless Series Niterider Mi Newt Mini Series Niterider Lightning Bug 120 USB (Universal Serial Bus) Niterider Sentinel 2W USB (Universal Serial Bus) Niterider Solas 2W USB (Universal Serial Bus) Niterider Stinger USB ...

Bontrager NCS Mudguard front & rear Set Complete arch mudguards arrive assembled ready for super quick installation. With integrated rear Blendr light mount for use with Bontrager Flare lights. Light weight, rust resistant & durable with several elements to ensure adjustment & a stable fit Available in ·700c x 18-25 mm ·700c x 28-35 mm ·700 c x 35-45 mm Suitable for: ·700c & 26”MTB This Mudguard is great for: the Bontrager NCS Mudguard front & rear Set is perfect for those wanting full coverage, the option for the blendr light gives you great variety when it comes to your fixtures & fittings. With the double strut with quick adjustment means you can get the right fit for your bike. Features Fully assembled mudguard that install in minutes Integrated rear Blendr light mount for use with Bontrager Flare lights No-cut struts allow quick strut adjustment for proper tyre clearance The double-back strut on rear mudguard adds support & stability made from lightweight yet super-durable polycarbonate Stainless steel hardware resists rust ...

Bontrager NCS Mudguard front & rear Set Complete arch mudguards arrive assembled ready for super quick installation. With integrated rear Blendr light mount for use with Bontrager Flare lights. Light weight, rust resistant & durable with several elements to ensure adjustment & a stable fit Available in ·700c x 18-25 mm ·700c x 28-35 mm ·700 c x 35-45 mm Suitable for: ·700c & 26”MTB This Mudguard is great for: the Bontrager NCS Mudguard front & rear Set is perfect for those wanting full coverage, the option for the blendr light gives you great variety when it comes to your fixtures & fittings. With the double strut with quick adjustment means you can get the right fit for your bike. Features Fully assembled mudguard that install in minutes Integrated rear Blendr light mount for use with Bontrager Flare lights No-cut struts allow quick strut adjustment for proper tyre clearance The double-back strut on rear mudguard adds support & stability made from lightweight yet super-durable polycarbonate Stainless steel hardware resists rust ...