About Us
Contact Us
Privacy Policy
Cookie Usage
Add Your Store

More From Contributor

Park Tool CC3.2 Chain Wear Indicator
Park Tool CC3.2 Chain
Wear Indicator
£9.99
A worn chain shifts poorly & wears sprockets at an accelerated rate. The CC-3.2 is a Go / No-Go gauge designed to accurately indicate when a chain reaches 0.5% & 0.75% wear
- the point at which most chain manufacturers suggest replacement The chain should be replaced soon if the 0.75% side fits into the chain, before other drive train components also start to wear out fast Longer design measures a greater length of chain, giving greater accuracy Made from precision, laser cut steel Consider that if you replace a chain because of wear other vital drive-chain components may need to be renewed too 10-speed compatible
...
Available
Park Tool Chain Gang Cleaning System
Park Tool Chain Gang
Cleaning System
£34.99
Prolong drive train life with this excellent kit Contains a Cyclone chain cleaner, Gear Clean brush, & 8 oz. of CB-4 Citrus Chain Brite cleaning fluid Everything you need to keep the drivetrain system clean & running super smooth Suitable for derailleur gear, hub gear, & single-speed bikes Made in the USA ...
Available
Park Tool Chain Tool All speeds
Park Tool Chain Tool
All Speeds
£34.99
An update to the perennial shop favourite The CT-3.2 features an adjustable locating shelf so it will remove & install the chain rivet on any bike chain, from 5 to 11-speed derailleur chains to 1/8 & 3/16 inch single-speed chains, making it our most versatile chain splitter Made from investment cast steel, the CT-3.2 has a comfortable to use size & fine thread for making easy work of even the toughest rivets Replaceable pin Please note that CT-3.2 will not peen the rivets on Campagnolo 11-speed chains: for these chains, a CT-11 Rivet Peening Tool is also required Made in the USA & covered by Parks legendary limited lifetime warranty ...
Available
Park Tool Clamp covers for PRS2 / 8 w/double cable reliefs
Park Tool Clamp Covers
For PRS2 / 8 W/double
Cable Reliefs
£11.99
Replacement clamp covers for PRS-2OS, PRS-3OS, PRS-5, PRS-6 (made after 1996), PRS-7 & PRS-8 Workstands with double cable reliefs This is the common shop stand jaw cover Clamp models that use this are the 100-3C, 100-5C, & 100-8C clamps Simply discard old covers & install new covers; each set

Includes:: two circlips

...
Available
Park Tool CT5 Mini Brute Compact Chain Tool
Park Tool CT5 Mini
Brute Compact Chain
Tool
£14.99
A chain tool that is small enough to go anywhere yet performs like a full-size workshop tool Fine thread & slide-away T-handle gives plenty of pressure at the pin head to move stubborn chain rivets

Includes:: a loosening shelf to release stiff links after assembly Replaceable driving pin head Works on most bicycle chains, including 10-speed Weighs just 77 grams

...
Available
Park Tool CWP-7 Crank Wrench and Puller
Park Tool CWP-7 Crank
Wrench And Puller
£16.99
The CWP-7 is a compact crank puller with a built-in 8mm hex for removing crank bolts

Includes:: two rotating

...
Available
Park Tool Derailleur Hanger Gauge
Park Tool Derailleur
Hanger Gauge
£69.99
The DAG-2.2 is an indispensable shop tool that can be used to both measure & straighten misaligned derailleur hangers, solving a high percentage of shifting problems Gauge bar made from heavy gauge, chrome plated steel Updated with tighter tolerances for enhanced accuracy Adjusts to fit 20 to 29+ wheels Upgraded, large inner shaft for added strength Replaceable 10mm x 1 threaded tip enhanced clearance & reach to work on more frame/derailleur hanger combos, including low clearance thru axle derailleur hangers Made in the USA & covered by Park Tools legendary limited lifetime warranty ...
Available
Park Tool DSD-2 Derailleur Screwdriver - 2 JIS
Park Tool DSD-2
Derailleur Screwdriver
- 2 JIS
£29.99
Precision component screwdriver machined to exact standards to ensure a perfect fit on compatible component fasteners Featuring an ergonomic, CNC machined & hard anodized 6061 aluminium handle Cross tip (2 Phillips) driver built to exceed JIS standards Covered by Park Tools legendary limited lifetime warranty ...
Available
Park Tool Dummy Hub
Park Tool Dummy Hub
£19.99
Also called a sleeping hub, the DH-1 fits into a frames rear dropouts to replace the rear wheel for chain cleaning & transport The unique design allows shifting with the DH-1 installed Works with all derailleur & 1/8 inch chains Works on frames with both open-type dropouts & 12 mm thru axle dropouts ...
Available
Park Tool FR-1.3 Freewheel Remover: Shimano Uniglide
Park Tool FR-1.3
Freewheel Remover:
Shimano Uniglide
£9.99
Part of a comprehensive range of freewheel removal tools 12 splines, 22.6mm diameter. Fits Shimano, Sachs Aris, Sun Race, DNP Epoch & other 5-10 speed freewheels The FR-1.3

Includes:: an enlarged thru-hole to accommodate 14mm axles Made in the USA & covered by Park Tools legendary limited lifetime warranty

...
Available

Park Tool CTPC Replacement Chain Tool Pins For CT2 / CT3 / CT5 / CT7.

CTPC - Pair of replacement chain tool pins for CT2 / CT3 / CT5 / CT7 Genuine Park Tool replacement part
Buy
  • Availability: In Stock
  • Supplier: Cycles U K
  • SKU: QKCTPC
Availability: In Stock
£4.99
sport, leisure & hobbies
Description Reviews / Comments Add New

Product Description

CTPC
- Pair of replacement chain tool pins for CT2 / CT3 / CT5 / CT7 Genuine Park Tool replacement part

Reviews/Comments

Add New

Intelligent Comparison

Oooops!
We couldn't find anything!
Perhaps this product's unique.... Or perhaps we are still looking for comparisons!
Click to bump this page and we'll hurry up.

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Genuine - A product that is "real", from the manufactuer, not a fake.

Supplier Information

Cycles U K
Page Updated: 2025-01-23 12:58:31

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu