The Cateye Centre Fork Light Bracket is an alternative light mount for busy handlebars. The centre fork bracket lets you mount the light using the pannier rack mount on compatible bike forks. This bracket is known to work with the following Cateye lights: Cateye Volt 1600 (HL-EL1010RC) / Volt 1200 (HL-EL100RC) / Volt 800 (HL0EL471RC) / Volt 700 (HL-EL470RC) / Volt 400 (HL-EL461RC) / Volt 300 (HL-EL460RC) / Volt 200 (HL-EL151RC) / Volt 100 (HL-EL150RC) Cateye Nano Shot+ (HL0EL625RC) / Nano Shot (HL-EL620RC) Cateye Econom Force (HL-EL540RC / HL-EL540) / Econom (HL-EL340RC / HL-EL340) Cateye Uno (HL-EL010) / Jido (HL-AU230) / HL-EL135 ...

Universal Bracket & Sensor kit to fit all Cateye wired computers including the Velo 5, Velo 7 & Enduro 8. ...

The Cateye Duplex light is a must have for commuters. This combined front & rear light massively increases your visibility when riding in traffic. Making yourself visible in city traffic can help motorists see you better, & a good helmet mounted light that is worn on your head, up & away from the distraction of car lights, can make you stand out in a sea of vehicles. Lightweight only 49g Long rubber attachment strap, turns 360 deg. Activated by pressing rear light lens only 2 X AAA batteries
- much longer runtimes Much more economical in the long term Front flash / rear flash or front constant / rear flash modes Mode: Output, Runtime FRONT: 15 Lm / 30 Lm Constant: 15 Lm, 100 hrs Flashing: 30 Lm, 100 hrs REAR: 10 Lm Flashing: 100 hrs
...

The Stylish & compact EL135 features three LEDs & Opti Cube lens technology to maximise the beam pattern utilising lens & reflector technology to emit a higher quality light & beam pattern in front of the rider, even with lower Lumen amounts. The HL-EL135 achieves a wider, 150 candlepower beam. Ensuring you can see & be seen. The Flex Tight™ H-34N bracket enables easy fitting & release the HL-EL135 is the perfect everyday commuter safety light. The Omni 5 rear light provides 360 degrees of visibility & the simple, tool-free Flex Tight bracket & included clothing clip allow you to easily attach the light anywhere you’d like. Cat Eye’s exclusive Flex Tight™ bracket fits virtually every bike. The ability to mounts either horizontally or vertically means that you can use the light to best suit your set up. HL-EL135 Features 3 white LEDs AA alkaline battery x 2 2 light modes (Constant/ Flashing modes) Flex Tight™ H-34N bracket Compact 2.5 x 3.5 x 9cm Approx 80hrs in constant mode & 320 hrs in flashing mode Omni 5 Features LEDs 360 degree visibility Wide beam OMNI directional technology & Opti Cube™ lens technology AAA alkaline battery x 2 3 modes Mode memory function Flex Tight™ SP-11 bracket (ø12-32mm) & Clothing clip included Approx 60hrs in constant, 90hrs in flashing, & 120hrs in rapid mode This light is great for: This basic light set is great safety light addition to your urban commute on itys own or as part of a set ensuring maximum visibility. ...

The Stylish & compact EL135 features three LEDs & Opti Cube lens technology to maximise the beam pattern utilising lens & reflector technology to emit a higher quality light & beam pattern in front of the rider, even with lower Lumen amounts. The HL-EL135 achieves a wider, 150 candlepower beam. Ensuring you can see & be seen. The Flex Tight™ H-34N bracket enables easy fitting & release the HL-EL135 is the perfect everyday commuter safety light. 3 white LEDs AA alkaline battery x 2 2 light modes (Constant/ Flashing modes) Runtime up to 80 hrs on constant mode & up to 320 hrs on flashing mode Flex Tight™ H-34N bracket Compact 2.5 x 3.5 x 9cm This light is great for: This light is great safety light addition to your light set ensuring maximum visibility. ...

The Cateye Flextight Helmet mount & strap are suitable for mounting Cateye Volt series lights on to helmets. It is not compatible with Cateye Volt XC Lights. This helmet bracket is known to work with the following Cateye lights: Cateye Sumo 2 (HL-EL920RC) Cateye Volt 1600 (HL-EL1010RC) / Volt 1200 (HL-EL100RC) / Volt 800 (HL-EL471RC) Cateye Volt 700 (HL-EL470RC) / Volt 400 Duplex (HL-EL462RC-H) / Volt 400 (HL-EL461RC) Cateye Volt 300 (HL-EL46)RC) / Volt 200 (HL-EL151RC) / Volt 50 (HL-EL460RC-Rear) Cateye Nano Shot (HL-EL620RC) Cateye Econom (HL-EL340RC / HL-EL340) Cateye Uno (HL-EL010) / Jido (HL-AU230) Cateye HL-EL135 / IN0U (MSC-CG100) ...

Cateye H31 Oversize handlebar bracket for front lights. Fits handlebars up to 32.0mm. This bracket works with a wide range of older Cateye headlights including: Cateye Sumo 3 (HL-EL930RC) / Sumo 2 (HL-EL920RC) Cateye Nano Shot+ (HL-EL625RC) / Nano Shot (HL-EL620RC) Cateye Econom Force (HL-E540RC / HL-EL540) Cateye Econom (HL-EL340RC / HL-El 340) Cateye Volt 1200 (HL-EL100RC) / Jido (HL-Au 230) Cateye INOU (MSC-GC100) ...

Cateye H32 Handlebar bracket. Fits handlebars up to 26.8mm. The H32 bracket fits a wide range of older Cateye front lights including: Cateye Sumo 3 (HL-EL930RC) / Sumo 2 (HL-EL920RC) Cateye Nano Shot+ (HL-EL625RC) / Nano Shot (HL-EL620RC) Cateye Econom Force (HL-E540RC / HL-EL540) Cateye Econom (HL-EL340RC / HL-El 340) Cateye Volt 1200 (HL-EL100RC) / Jido (HL-Au 230) Cateye INOU (MSC-GC100) ...

Heavy Duty universal bracket & sensor kit for Cateye wired computers. This kit is ideal if you plan to use your Cateye wired computer on your mountain bike. Fits a range of Cateye wired computers including the Velo 5, Velo 7 & Enduro 8. ...

Cateye HP 5 CLAMP 19-22.8mm. This Cateye clamp is designed for use on seat stays with rear LED lights giving you an extra position to put rear lights on your bike. The Cateye HP 5 clamp works with lights including: Cateye Rapid Series Cateye Reflex Auto (TL-LD570-R / -F) Cateye Reflex (TL-LD560-R) Cateye Omni 5 (TL-LD150-R) Cateye Omni 3 (TL-LD130-R) Cateye Solar (SL-LD120-R /-F) ...