The Cycleops 142x 12 Standard Thru Axle Adapter Kit consists of an axle, washers, & end caps with bolts so that you can adapt thru axle bikes to work with Cycleops Classic or Pro series turbo trainers. The axle is threaded on both sides to fit syntace & maxle/abp style thru axle systems. Fits most 142mm thru axles with 1.0 & 1.75 thread pitch Features Adapts a thru axle hub bike for a trainer. Compatible with Cycleops Classic & Pro series trainers. Fits most 142x 12mm thru axle bikes with 1.0 or 1.75 thread pitch. ...

The Cycleops 20/24 inch Wheel Adapter lets you run 20” & 24” wheel bikes on a range of the adult sized Cycleops Trainers. Our friends over at Triathlon Trust use these adaptors when they run Triathlon taster days & challenges for primary school kids. They are also handy if you want to run a recumbent on a turbo. Features means that you can use kids, bmx or recumbent bikes with your trainer. Raises the resistance unit up to wheel height for smaller size wheels. For use with Cycleops wind, mag, magneto, fluid 2 & powersync trainers. Not compatible with Cycleops magnus trainer. ...

The Cycleops ANT+ Wireless USB (Universal Serial Bus) Stick works directly with your PC or laptop to connect your smart trainer to Zwift (& equivilant) via ANT+, reducing the number of wires you need trailing around & making for a neater setup. ...

The Cycleops Fluid Yellow Turbo Trainer is part of their no frills classic range of trainers. The Cycleops Fluid Yellow trainer gives you the essentials you need to try out indoor training anywhere you want. Its fluid progressive resistance matches your effort without putting out masses of noise so you can use the trainer in one room while your family watch TV in another. The Fluid Yellow trainer will work with all common adult bike wheel sizes & with most road bike & mountain bike frames. Although the Fluid Yellow Trainer is not a ‘smart trainer’ you can hook it up to virtual training software like Zwift using the Cycleops Speed Sensor (sold separately). This will allow you to send data to programs like Zwift but not to get feedback in return. If you want to give indoor training a try but don’t want to break the bank on the latest smart trainer the Cycleops Fluid Yellow Turbo Trainer is a good choice. Features Fluid resistance unit provides a quiet & consistent ride. Progressive resistance offers the widest resistance range & road-like feel. Eccentric leveling feet allow for easy adjustment on uneven surfaces. Comes on a sturdy, foldable yellow frame. Adjust tyre fit to resistant unit with a convenient turn knob. Resistance unit roller allows for 700c, 26", 27" & 29" wheel sizes – up to a 2.0 tire. This trainer is designed to fit common road & mountain bike frames with included steel quick release skewer & is compatible with rear dropout spacing: 120mm, 130mm & 135mm. ...

The Cycleops Fluid Yellow Turbo Trainer with Speed Sensor is part of the Cyclopes no frills classic range of trainers. The Cycleops Fluid Yellow trainer gives you the essentials you need to try out indoor training anywhere you want. Its fluid progressive resistance matches your effort without putting out masses of noise so you can use the trainer in one room while your family watch TV in another. The Fluid Yellow trainer will work with all common adult bike wheel sizes & with most road bike & mountain bike frames. Although the Fluid Yellow Trainer is not a ‘smart trainer’ you can hook it up to virtual training software like Zwift using the Cycleops Speed Sensor (included in this kit). This will allow you to send data to programs like Zwift but not to get feedback in return. If you want to give indoor training a try but don’t want to break the bank on the latest smart trainer the Cycleops Fluid Yellow Turbo Trainer is a good choice. Features Fluid resistance unit provides a quiet & consistent ride. Progressive resistance offers the widest resistance range & road-like feel. Eccentric leveling feet allow for easy adjustment on uneven surfaces. Comes on a sturdy, foldable yellow frame. Adjust tyre fit to resistant unit with a convenient turn knob. Resistance unit roller allows for 700c, 26", 27" & 29" wheel sizes – up to a 2.0 tire. This trainer is designed to fit common road & mountain bike frames with included steel quick release skewer & is compatible with rear dropout spacing: 120mm, 130mm & 135mm. ...

The Cycleops Bike Sweat Guard is designed to stop sweat dripping onto your bike. When you are working very hard on a turbo trainer you will sweat a lot & your salty sweat is not great for bike parts. Over time lots of sweat will corrode bike parts. The Cycleops Sweat Guard hooks between your handlebars & seatpost to stop sweat dripping directly onto your bike & it

Includes:: a handy ouch to keep your phone, TV remote or other bits of tech in so they are close at h&. Features Keeps corrosive sweat from reaching your frame Easy to fit Phone/remote pouch included

...

Using the Cyclops Classic Aluminium Rollers will not only get you fitter but will improve your bike handling skills & pedalling action at the same time. On the Classic Rollers you have to pedal smoothly 100% of the time & balance the bike & keep it in a straight line while you do it. Mastering the rollers will translate to more efficiency, power & technique on the road. Features Aluminum roller drums run silent & smooth. Precision-lathed 3.25" aluminum roller drums wont distort in heat or sunlight. Fold flat or stand on end for convenient storage. Designed for both indoor & outdoor use. 16" wide wheel base fits just about any size of bike & allows plenty of room to move around. Rubber foot pads ensure that the only thing moving on the rollers are the drums for a secure, sturdy ride. Durable steel-frame construction. Adjustable belt for right & left dismount. Available with unique patent-pending, 5-level adjustable resistance. Resistance Roller features 5-levels of adjustable resistance. Resistance Roller uses zero moving parts to deliver quiet magnetic resistance. Maximum wheelbase 44.5" (axle to axle) Minimum wheelbase 37.5" (axle to axle) ...

The Cycleops Classic Clutch Knob Upgrade/ Replacement Kit lets you easily adjust your turbo trainer to get the correct contact between your tyre & the roller. The Clutch know has ratchets inside that will give an audible click when you reach the correct tension so you don’t over, or under, tighten the bolt. Having the correct contact between tyre & roller will make your training session more efficient & extend the life of your tyres. Features

Includes:: clutch knob & L-bolt Classic Trainer Clutch Knob is compatible with any Cycleops Wind, Mag, Mag+, Magneto or Fluid trainer that already uses the L-bolt Magnus Clutch Knob should only be used with Magnus Smart Trainer Also Compatible with the new M2 product

...

The Cycleops H2 Direct Drive Smart Trainer is the new top of the range turbo trainer from Cyclops. Zwift certified, this trainer is designed for anyone from pro-podium chasers, mountain bikers to triathletes who wants the best indoor training experience. The heart of the H2 is its ability to replicate real world inertia better than anyone else thanks to it its massive, 20-pound precision-balanced flywheel. The H2’s also has impressive electrical prowess with integrated cadence, speed & power data, internal cooling, over-the-air firmware updates, dual-band ANT+ & Bluetooth compatibility & topped off with its electromagnetic resistance system for rapid resistance changes within virtual training environments. Plus, at 64 decibels the H2 is library-level quiet. Compatible with a wide variety of devices & virtual training application, including Rouvy, Zwift, Trainer Road & many more. The H2 is works with almost all adult bikes. Features Noise level at 20 mph is 64 decibels, quiet enough to ride in a library. Power Tuned using Power Tap technology for up to +/- 2% accurate power readings. Thru-axle compatible for bike frames with fork widths of 142 or 148. Quick-release compatible for bike frames with fork widths of 130mm & 13.5cm. Integrated dual ANT+ FE-C & Bluetooth standards. Compatible with a wide variety of devices & virtual training application, including Rouvy, Zwift, Trainer Road & many more. 20 lb precision balanced flywheel provides quiet, vibration free & true-to-the-road riding experience. Fast response electromagnetic resistance ensures most responsive resistance & maximum power available. Robust design is capable of handling up to 2000 watts at 20 mph & can simulate up to a 20% climbing grade. Headless mode (powered on, not paired to any apps) lets you ride with a progressive resistance curve that matches the Fluid 2 Internally integrated speed, cadence & power data eliminates the need for extra external sensors. LED indicator lights communicate connectivity & more. Direct drive design directly connects the bicycle to the resistance unit, eliminating tyre wear. Integrated front wheel tray adds stability to ride without taking up any extra storage space. Internal cooling technology ensures accurate ride data even during the hardest of workouts. Built-in front wheel tray adds stability to ride & nests within the trainer when not in use. Folding legs provide widest footprint of direct drive indoor bicycle trainers on the market for added stability & easy storage.

Includes:: a Shimano splined freehub for compatibility with Shimano 8-11 speed cassettes. XD freehubs are also available & sold separately. Accessible & balanced handle allows for smooth, anyone-can-carry transit of the trainer. Over the air (OTA) firmware updates via Bluetooth ensures the H2 is up to date with all the latest features. All of our trainers are tested to the combined weight (rider & bike) of 300 lbs.

Dimensions when Open L*H*W: 31” x 18.5” x 19.5” (787.4 x 469.9 x 495.3 mm).

Dimensions when Closed L*H*W: 8.5” x 18.5” x 19.5” (76.2 x 469.9 x 495.3 mm). Weighs in at 47 lb. (21.3 kg). ANT+ & Blue Giga USB (Universal Serial Bus) dongles sold separately. Cassette not included.





...

Cyclops M2 Smart Turbo Trainer is a Zwift certified Smart trainer. This do-it-all, smart bike trainer is capable of replicating any workout thrown its way, up to 1500 watts & a 15% climbing grade. Simply connect to your virtual training application of choice via integrated dual-band ANT+ FE-C & Bluetooth, & let the M2’s electromagnetic response system do the rest. With integrated speed, cadence & power data, you can track & record performance data without extra external sensors. Plus, the innovative clutch knob ensures perfect tire-to roller connection for every single ride. If you are looking for a capable smart trainer that doesn’t cost the earth then the Cycle Ops M2 is a great choice. It works with a massive range of bikes & wheel sizes & has been Power Tuned using Power Tap technology for accurate power readings up to +/- 5%. Compatible with a wide variety of devices & virtual training applications, including Rouvy, Zwift, Trainer Road & many more. Features Integrated dual ANT+ FE-C & Bluetooth standards. Fast response electromagnetic resistance ensures most responsive resistance & maximum power available. Robust design is capable of handling up to 1500 watts at 20 mph & can simulate up to a 15% climbing grade. Headless mode (powered on, not paired to any apps) lets you ride with a progressive resistance curve that matches the Fluid 2. Internally integrated speed, cadence & power data eliminates the need for extra external sensors. LED indicator lights communicate connectivity & more. Internal cooling system moves air through the trainer to keep it cool while active thermal sensors ensure accurate performance data even during the hardest of workouts. Comes on the Cycle Ops foldable Classic frame with spring loaded, bolt-action lever. Features clutch knob for perfect roller to tire tension each ride. 2" resistance unit roller allows for 650b, 700c, 26", 27", & most 29"
- up to a 2.0 tyre (Does not fit 650c wheel sizes, nor all 29er tyres). Precision-machined alloy roller reduces tire wear & slippage. Eccentric leveling feet allow for easy adjustment on uneven surfaces. Trainer tire recommended. Over the air (OTA) firmware updates via Bluetooth devices ensures the M2 is up to date. Some assembly required. All of our trainers are tested to the combined weight (rider & bike) of 300 lbs. ANT+ & Blue Giga USB (Universal Serial Bus) dongles sold separately. Not compatible with Cycle Ops 20/24" wheel adapter. Optional thru-axle adapter available for 142x 12mm & 148x 12mm bikes.
...