More From Contributor

Finish Line e-Bike Chain Lube 4oz Bottle has been designed specifically for the needs of electric bikes. With a semi-dry formulation, & a proprietary blend of high pressure & corrosion inhibiting additives, Finish Lines e-Bike Chain Lube keeps your electric bike running smoothly & helps to extend the life of your components. Most mid-drive Electric Bike systems will add up to an additional 250 Watts to the riders input, & some performance models can add up to 350 Watts. This consistent, high power means that chains experience much higher rates of wear. Finish Line’s Electric Bike Chain Lube can stand up to the high torque associated with electric assist drivetrains, & also provided long lubrication intervals. The formula also helps shed dirt, prevent premature wear, & provide superior protection against rust & corrosion. ...

Available

Finish Line e-Bike Cleaner 14oz/415ml Aerosol is unique, foaming cleaner specially made for Electric Bike maintenance. Most manufacturers recommend cleaning an Electric Bike after every ride. This

Includes:: cleaning the battery contacts, plug pins, & the rest of the bike. To do this & not risk damaging any electronic components, Finish Line has developed a cleaner that is gentle, non-caustic, leaves no streaks, & requires no water rinsing. Thanks to its clinging foam technology, Finish Line e-Bike Cleaner is safe & easy to use. It can be used to clean all surfaces including anodized aluminium, steel, titanium, carbon fibre & matte finishes. Left unchecked, dirt & grime can cause the battery & motor on your electric bike to wear & work less efficiently. Finish Line e-Bike Cleaner is formulated to safely remove grime before it migrates into electrical components, extending the life of your bike.

...

Available

Finish Line E-Shift Groupset Cleaner is a degreaser designed specifically for use with electronic groupsets. Due to sensitive components, electronics, & wires, safely cleaning & degreasing components is more important than ever. Finish Line E-Shift Groupset Cleaner can quickly & safely remove grit, grime, & moisture from any electronic groupset. With E-Shift there is no need to worry about damaging wires or derailleurs. Due to its state of the art formulation, E-Shift quickly evaporates without leaving a residue behind, which means there is no need for water rinsing. Parts are left completely clean & dry in minutes. E-Shift Groupset Cleaner protects your groupset investment, prevents premature wear, & keeps it running at peak performance. ...

Available

Finish Line E-Shift Groupset Cleaner is a degreaser designed specifically for use with electronic groupsets. Due to sensitive components, electronics, & wires, safely cleaning & degreasing components is more important than ever. Finish Line E-Shift Groupset Cleaner can quickly & safely remove grit, grime, & moisture from any electronic groupset including SRAM e Tap & Shimano Di 2. With E-Shift there is no need to worry about damaging wires or derailleurs. Due to its state of the art formulation, E-Shift quickly evaporates without leaving a residue behind, which means there is no need for water rinsing. Parts are left completely clean & dry in minutes. E-Shift Groupset Cleaner protects your groupset investment, prevents premature wear, & keeps it running at peak performance. ...

Available

Finish Line Fiber Grip Carbon Fibre Assembly Gel 1lb/455 ml Tub is specially designed to create friction & reduce slippage between clamped carbon fibre surfaces. Fiber Grip eliminates the need to over tighten clamps to achieve secure connections. Over tightening can cause internal fractures & fatigue of carbon fiber parts. Apply Fiber Grip in a thin film to clamping areas of stems, handlebars, seat posts, & seat tubes. Tested & approved by leading carbon fiber component manufacturers. Features Fiber grip is specially designed to create friction & reduce slippage between clamped carbon fibre surfaces on bicycle frames & components eliminates the need to over-tighten clamps to achieve a tight, secure & safe fit over tightening can cause internal fractures & fatigue of carbon fibre parts resulting in permanent failure in addition inadequately tightened components can be hazardous if they move or slip suddenly whilst riding apply fiber grip in a thin film to all clamping areas of stems, handlebars, seat posts, & seat tubes tested & approved by leading carbon fibre component manufacturers available in 1.75 oz / 50 g or / 450 g quantities ...

Available

Finish Line Kry Tech Chain Lube 2oz/60ml Bottle is the ideal lube for when you want maximum cleanliness. Kry Techs advanced formula uses Krytox lubricating film, Du Ponts most advanced lubrication technology, which bonds to metal parts. The addition of Molybdenum improves load bearing ability, & extends re-lubrication intervals. This wax lube will dry completely, & is then shed from the chain during use, taking with it surface grime. The Dry formula gets into moving parts but does not form an abrasive paste by attracting dirt & grime. The bottle features narrow nozzle to direct lube accurately onto parts. ...

Available

Finish Line Kry Tech Chain Lube 4oz/120ml Bottle is the ideal lube for when you want maximum cleanliness. Kry Techs advanced formula uses Krytox lubricating film, Du Ponts most advanced lubrication technology, which bonds to metal parts. The addition of Molybdenum improves load bearing ability, & extends re-lubrication intervals. This wax lube will dry completely, & is then shed from the chain during use, taking with it surface grime. The Dry formula gets into moving parts but does not form an abrasive paste by attracting dirt & grime. The bottle features narrow nozzle to direct lube accurately onto parts. ...

Available

Finish Line Max Suspension Spray will improve your suspension forks performance. Made with carefully chosen polysiloxane & advanced fluoropolymers, Max Suspension Spray is formulated to fight stiction, condition & protect seals, o-rings, & other rubber parts. Over time fork stanchions can become dry & less responsive. This can result in loss of travel, slow rebound, & cause the fork to feel very stiff over bumps. When this happens, a quick shot of Max Suspension Spray will immediately improve your forks performance. Use Finish Line Max Suspension Spray on old forks to bring them back to life or use Max to help break in new forks & optimize their performance. As Max reduces stiction, forks run more smoothly & quietly. Small bumps are instantly absorbed & response to big hits is noticeably enhanced. Max Suspension Spray will keep your bike in race-ready condition. Features A premium bicycle suspension spray, designed to specifically help reduce stiction on sliders max suspension spray fights the friction & stiction that inflicts older dried-out forks & new ones that are not yet broken in max will reduce the sliding friction of coated stanchions & the polysiloxane & fluoropolymer components of max will also condition & protect seals & o-rings use max to bring an old fork back to life or make a new fork silky smooth & snappy quick ...

Available

Finish Line Mineral Oil Brake Fluid 4oz/120ml is formulated specifically for bicycle brake systems requiring mineral oil. It features no compromise leading edge chemistry to provide superior fluid life & braking performance. Finish Line Mineral Oil uses a low viscosity base oil to yield superior level response, pad retraction, & consistent performance through a full range of operating temperatures. When you are serious about getting the most out of your braking system, Finish Line Mineral Brake Fluid is a great choice. Features Specifically engineered for use in bicycle hydraulic disc brakes Provides maximum fluid life & braking performance, even at low temperatures Prevents foaming & overheating ...

Available

Finish Line Multi Seal Tubeless Tyre Sealant is naturally non-toxic, hypoallergenic & safe for carbon fibre rims. Fiber Link technology makes this possible. Utilizing Du Pont Kevlar fibres, Fiber Link seals are extremely robust once they plug a hole. When a puncture happens, fibres rush into the wound & quickly stop air loss. As the tyre flexes while it is ridden, the Fiber Link mesh tightens & reinforces itself, creating a confidence-inspiring seal that will last ride-after-ride. Features Creates a kevlar reinforced fibrelink seal when a puncture happens, fibers rush into the wound & instantly stop air loss as the tire flexes while it is ridden, the fiberlink mesh tightens & reinforces itself, creating a confidence-inspiring seal that will last ride after ride utilizing dupont kevlar fibers, fiberlink seals are extremely robust once they plug a hole latex free, will not dry out inside the tire once installed will last the entire usable life of the tire no refreshing required; no gradual weight gain co 2 compatible & unaffected by cold temperatures naturally non-toxic & hypoallergenic water soluble & cleans up easily with a wet rag ...

Available

Finish Line Grease Gun

The Finish Line Grease Gun is great for delivering measured amounts of grease where you need it when lubricating pedals, hubs, bottom brackets, headsets, crank bolts, etc. Using the Finish Line Grease Gun reduces waste and mess when doing repairs and fitting parts. Compatible with Finish Lines 3.5oz Premium Grease tubes, 2oz Ceramic Grease tubes. Fits most other standard 9/16" threaded tubes of grease. Features: Easy one hand operation Ideal for delivering measured amounts of grease into hard to reach places. Long tip for recessed suspension pivots Great for lubricating pedals, hubs, threaded parts, headsets, crank bolts, etc. Simply thread a tube of grease onto the pump for the perfect solution to all your precision regreasing needs, whilst avoiding the problem of
contaminated grease which is common with open pots this long tip grease pump is suitable for use with all grease guard purgeable bearing systems the pumps special long tip is precision radiused to mate exactly with all popular grease fittings, and delivers about 2 cc of grease per stroke this feature avoids seal damage, and helps eliminate the problem of over greasing which can actually increase friction in a bearing long tip will reach even the most recessed suspension pivot grease ports

Availability: In Stock
Supplier: Cycles U K
SKU: 450114

Description Reviews / Comments Add New

Product Description

The Finish Line Grease Gun is great for delivering measured amounts of grease where you need it when lubricating pedals, hubs, bottom brackets, headsets, crank bolts, etc. Using the Finish Line Grease Gun reduces waste & mess when doing repairs & fitting parts. Compatible with Finish Lines 3.5oz Premium Grease tubes, 2oz Ceramic Grease tubes. Fits most other standard 9/16" threaded tubes of grease.

Features: Easy one hand operation Ideal for delivering measured amounts of grease into hard to reach places. Long tip for recessed suspension pivots Great for lubricating pedals, hubs, threaded parts, headsets, crank bolts, etc. Simply thread a tube of grease onto the pump for the perfect solution to all your precision regreasing needs, whilst avoiding the problem of contaminated grease which is common with open pots this long tip grease pump is suitable for use with all grease guard purgeable bearing systems the pumps special long tip is precision radiused to mate exactly with all popular grease fittings, & delivers about 2 cc of grease per stroke this feature avoids seal damage, & helps eliminate the problem of over greasing which can actually increase friction in a bearing long tip will reach even the most recessed suspension pivot grease ports

More From Contributor

Finish Line Grease Gun

Product Description

Reviews/Comments

Add New

Intelligent Comparison

Price History

Vouchers

Facebook

Jargon Buster

Supplier Information

Community Generated Product Tags

Contact Us

Information

My Account