The Record Power RPBG6 is a 150 mm. bench grinder with a smooth running induction motor. Now in the green & silver livery of this premium machine & boasting a five year guarantee this compact 150 mm. bench grinder features a quiet smooth running powerful 370 watt induction motor to ensure smooth running & optimal performance. Adjustable tool rests compliment two kinds of grinding stone a 20 mm. grey wheel & a 40 mm. wide whitestone with a fine grit for more delicate applications.

Size: 150 mm. 6 in. Motor: 370 Watt.

...

An Oil finish, suitable for all types of wood. It differs from Teak oil in that in contains a special ingredients, which prevent it drying to a gloss. It is an easy to wipe on finish, which brings out the beauty og the timber & gives a natural, open grained, soft lustrous finish. Ideal for all woods & is excellent on turned woodwork. For all interior andexterior bare wood, doors, joinery, garden & indoor furniture. ...

An oil finish, suitable for all types of wood. It differs from Teak oil in that in contains special ingredients which prevent it drying to a gloss. It is an easy to wipe on finish, which brings out the beauty of the timber & gives a natural, open grained, soft lustrous finish. Ideal for all woods & excellent on turned woodwork. For all interior & exterior bare wood, doors, joinery, garden & indoor furniture. ...

Quick Dry Outdoor Danish Oil is a water-borne blend of natural plant oils & other special ingredients to nourish & protect all types of outdoor timber. It contains ultra violet light inhibitors to protect against sunlight. The oil dries with a low lustre finish. It is a penetrating oil drying to a hard durable & water resistant seal that brings out the beauty of the grain within timber & enhances the warmth & depth to hardwoods & veneered surfaces. ...

Flake shellac dissolved in alcohol. Intended Use. Suitable for French Polishing all dark & light coloured woods, when a light to medium brown tone is required. Suitable for sealing wood before waxing. When applied correctly will produce a high gloss finish. Alcohol evaporates rapidly leaving a film of shellac on the surface of the timber. Wood should be clean & smooth. If grain is open, fill with Rustins Grainfiller. Furniture that is to be renovated should be cleaned with White Spirit & fine wire wool to ensurethat it is free from grease & wax. Apply as many coats as required to build a sufficient layer of shellac. For sealing wood before waxing, apply 2 liberal coats. ...

Rustins heat resistant paint is based on a high quality water-borne cross linking acrylic resin. I is a low VOC paint for use on metal & wood on both interior & exterior surfaces. The maximum heat resistance is approx 220&0176;C. Not suitable for use on wood burning stoves. ...

High Heat Black paint is a fast drying protective & decorative paint which is stable to temperatures up to 600C. Suitable for use on Ferrous Metals such as wood burning stoves, barbeques, domestic & industrial stoves, furnace chimeys, grats & exhausts. ...

Modified so as to increase the rate of drying & hardness of the film- Ideal for oiling bare wood adding to paint & softening Metal Glazing Putty. Not suitable for oiling furniture or wooden floors. For furniture use Rustins Danish Oil or Teak Oil. Forfloors use Rustins Floor Oil.-11 to 14 sq metres per litre per coat, depending on the absorbency of the wood.- Boiled to speed up drying time.- Slow drying. Dependant on temperature, humidity & film thickness. For faster drying linseed oil use Rustins Boiled Oil. ...

A two-part cold cure lacquer with excellent adhesion & durability. Almost colourless & will not craze or yellow on ageing. Resistant to scratching abrasion most solvents weak acids & alkalis. Can be applied to wood cork chipboard MDF laminates slate & stone. Re-coatable after 1-1. 1/2 hours floor can be used 2 hours after last coat has been applied. Gloss Finish. ...

A two-part cold cure lacquer with excellent adhesion & durability. Almost colourless & will not craze or yellow on ageing. Resistant to scratching abrasion most solvents weak acids & alkalis. Can be applied to wood cork chipboard MDF laminates slate & stone. Re-coat able after 1-1. 1/2 hours floor can be used 2 hours after last coat has been applied. ...