The DENALI 2.0 perch switch mount kit is used to fit the switches to your clutch or brake perch. The kit

Includes::

...

This DENALI MT Series 3-Pin Male Waterproof Connector Pigtail can be used to adapt other brands of lighting or accessories to the DENALI CANsmart Controller or 2.0 Premium Wiring Harness. The connector is pre-assembled with 3 inch 18 AWG wires exiting the connector which can be soldered onto the light or accessory of your choice. Article: DENALI 3 pin Male Connector, Size 30 mm Article: DENALI 3 pin Male Connector, Size 30 mm, Size 30 mm ...

This DENALI DRL wiring harness kit features high-quality waterproof components & is designed to power two DENALI DRL Light Pods. It features low profile, water tight connectors & high quality molded wire to ensure moisture is kept out of the system. The harness

Includes:: a completely sealed, waterproof switch that was engineered from the ground up to withstand harsh conditions on powersports vehicles. It’s clever design can be either flush or bar mounted. The switch enables independent dimming of the lights, separate from the vehicle's OEM lighting system.    What's In The Box?   * (x 1) DRL Harness * (x 1) Hi-Low-Off Switch * (x 1) ⅞” Handlebar Switch Mount   Article: DENALI 3 Way Switch with Wiring Harness

...

3-pin waterproof connector, pigtail, female This DENALI MT series 3-pin waterproof connector pigtail can be used to modify, customise or replace electrical connections. The connector is pre-assembled with 3-inch 18 AWG wires that exit the connector & can be attached to the light fixture or accessory of your choice. Article: DENALI 3-pin Waterproof Connector, Pigtail, Female ...

The B6 LED brake light was purpose built to create the most amount of light from the most compact, low-profile housing possible. Six 1-watt Light Emitting Diodes generate enhanced visibility with minimal bulk. Newly updated to operate as both a brake light & running light, the B6 provides enhanced functionality on conventional motorcycles as well as those that can use the advanced features of the CANsmart Controller (sold separately). Note that flash patterns & deceleration activated “auto brake light” functionality is only available when used in conjunction with the DENALI CANsmart Controller.  

Features:   * Six extremely bright LEDs * Low 6 watt power consumption * Running light * Brake light * License plate light * Low profile design * Easy to wire to existing brake & running light circuits * Compatible with DENALI CANsmart Controller (sold separately)   Additional Features Article: DENALI B6 License Plate Brake Light

...

This wiring adapter enables plug-&-play installation of DENALI B6 Brake Lights to the Ducati Desert X. Add a single B6 or Dual B6 Brake Light to complete your installation.  This harnesses plugs in-line at the Desert X brake light connector (to access the brake & ground) & picks up running light power from the accessory circuit under the passenger seat. This will ensure that consistent power is provided to your accessory brake light.  An optional 3-wire pigtail is included with this adapter for riders who what to connect the brake circuit of DENALI T3 Rear Switchback Turn Signals to the Desert X.  Article: DENALI Brake Light Wiring Adapter ...

Harness the flexibility & intelligence of your motorcycle's CAN bus electrical system to make installation of accessories drastically easier with the new & enhanced DENALI CANsmart™ Controller GEN II. The DENALI CANsmart™ Controller provides plug-n-play installation & integrated control of up to four accessories to enable dozens of customizable settings that can be controlled right from the CANsmart™ Accessory Manager Software.  The CANsmart's four circuits are preprogrammed to connect & independently control two sets of DENALI lights, a Sound Bomb horn, & the B6 auxiliary brake light.   Gen II
- More  Features, More Power, More Versatile Unlike the Gen I CANsmart, all four circuits of the Gen II can provide a full 10 amps of continuous power & each circuit can be configured to run any accessory type. The maximum power draw for the whole unit remains at 30 amps continuous. The Gen II also features two new auxiliary light settings. You can now modulate your auxiliary lights fo...
...

Harness the flexibility & intelligence of your motorcycle's CAN bus electrical system to make installation of accessories drastically easier with the new & enhanced DENALI CANsmart™ Controller GEN II. The DENALI CANsmart™ Controller provides plug-n-play installation & integrated control of up to four accessories to enable dozens of customizable settings that can be controlled right from the CANsmart™ Accessory Manager Software.  The CANsmart's four circuits are preprogrammed to connect & independently control two sets of DENALI lights, a Sound Bomb horn, & the B6 auxiliary brake light.   Gen II
- More  Features, More Power, More Versatile Unlike the Gen I CANsmart, all four circuits of the Gen II can provide a full 10 amps of continuous power & each circuit can be configured to run any accessory type. The maximum power draw for the whole unit remains at 30 amps continuous. The Gen II also features two new auxiliary light settings. You can now modulate your auxiliary lights fo...
...

DENALI GEN II CANsmart Controller for BMW R1300GS '24- Product description Take advantage of the flexibility & intelligence of your BMW motorbike's CAN bus electrical system to make accessory installation much easier with the new & enhanced DENALI CANsmart™ Controller GEN II. The DENALI CANsmart™ Controller offers plug-&-play installation & integrated control of up to four accessories to enable dozens of customisable settings that can be controlled directly from the BMW „ Wonder Wheel“ or the CANsmart™ accessory manager software. The CANsmart's four circuits are pre-programmed to connect & independently control two sets of DENALI 2.0 lights, a Sound Bomb horn & our B6 auxiliary brake light. Gen II – More functions, more power, more versatile In contrast to the Gen I CANsmart, all four circuits of the Gen II can deliver a full 10 amps of continuous current & each circuit can be configured to operate any type of accessory. The maximum current draw for the entire unit is 30 amp... ...

Harness the flexibility & intelligence of your Norden's CANbus electrical system to make installation of accessories drastically easier with the new & enhanced DENALI CANsmart™ Controller GEN II. The DENALI CANsmart™ Controller provides plug-n-play installation & integrated control of up to four accessories to enable dozens of customizable settings that can be controlled right from your Norden's switch cluster or the CANsmart™ Accessory Manager Software.   Gen II
- More Features, More Power, More Versatile Unlike the Gen I CANsmart, all four circuits of the Gen II can provide a full 10 amps of continuous power & each circuit can be configured to run any accessory type. The maximum power draw for the whole unit remains at 30 amps continuous. The Gen II also features a new auxiliary light setting where you modulate your auxiliary lights for added conspicuity.   Features High/ Low Sync
- Set passing lamps & auxiliary lights to switch between a programmable high/low setting with t...

...