DENALI CANsmart™ Kit D2, Black

DENALI CANsmart™ Kit D2 consisting of:   * DENALI CANsmart™ Controller GEN II (1x) * DENALI D2 LED Additional Lighting 10W - By Unit (2x)  The DENALI D2 2.0 LED TriOptic™ LED light kit with DataDim technology produces a remarkable amount of light in a very compact package that is perfect for all styles of riding and types of motorcycles. With a powerful 10-watt Cree LED, the DENALI D2 casts a powerful beam 160m down the road.   Housed in compact aluminum pods, the D2 LED lights are perhaps the most versatile design available; powerful enough to be your “primary” driving light yet small and light enough to comfortably mount on a fender. The DENALI D2s feature durable black powder-coated finishes and special cooling fins to make sure the LED itself runs cool and bright. New
for the DENALI 2.0 series is a special Impact PC™ corrosion proof bezel that ensures your lights will continue to look great even after repeated stone and debris impacts.   Also new with the DENALI 2.0 generation of lighting is the industry-leading TriOptic™ lens system. Each lamp comes with both spot (installed) and flood (supplied) lenses, nothing else to buy. The spot lens produces the greatest beam distance, while the flood lens produces a broader spread of light closer to the motorcycle, filling the road edge and shoulders. To get the best of both worlds, use a spot lens on one light and a flood lens on the other light for distance illumination and a useful spread of light at close range. No matter which lens you choose, the D2 2.0 light kit lets you see the road (or lack
thereof) and be seen by other traffic around you. It’s that simple: See further, be seen better, with DENALI!   Specifications:   * LEDs 10 Watt Cree XPL HI (per lamp) * Power Draw: 1.6 amps (total) * Beam Distance (spot): 160m * Beam Width (spot): 22m * Raw Lumens: 2190 * Intensity: Single Intensity Harness * DataDim™ Compatible: Yes * Operating Voltage: 12v * Pod Size: Ø55x60mmProduct Description Harness the flexibility and intelligence of your Triumph motorcycle's CANbus electrical system to make installation of accessories drastically easier with the new and improved DENALI CANsmart™ Controller GEN II. The DENALI CANsmart™ Controller provides plug-n-play installation and integrated control of up to four accessories to enable dozens of customizable settings that can be
controlled right from your Triumph's hand controls or the CANsmart™ Accessory Manager Software.  The CANsmart's four circuits are preprogrammed to connect and independently control two sets of DENALI 2.0 lights, a SoundBomb horn, and our B6 auxiliary brake light.   Gen II - More Features, More Power, More Versatile Unlike the Gen I CANsmart, all four circuits of the Gen II can provide a full 10 amps of continuous power and each circuit can be configured to run any accessory type. The maximum power draw for the whole unit remains at 30 amps continuous. The Gen II also features two new auxiliary light settings. You can now modulate your auxiliary lights for added conspicuity, and set your left and right side lights to independently cancel when you activate your
corresponding turn signal.      Features * High/Low Sync - Set auxiliary lights to switch between a programmable high/low setting with the factory high beam switch. * ON/OFF and Dim - Independently control two sets of lights ON/OFF and change intensity level (for both day and night) right from your original vehicle switches. * Modulate Lights - Set auxiliary lights to modulate to increase your visibility to other motorists. * Flash to Pass - Need to get someone's attention? Pulse your high beam switch three times and your auxiliary lights will strobe three times fast. * Cancel With Turn Signal - This feature cancels the corresponding auxiliary light when you turn your turn signal on preventing powerful auxiliary lights from overpowering your signal. * Inverse Flashing With
Hazards - This features flashes your auxiliary lights inversely to your hazard lights, increasing visibility during road side emergency's.  * Plug & Play Horn Installation - Quickly and easily connect high power aftermarket horns like our SoundBomb™ without having to add an additional harness or relay. * Strobe with Horn - With this feature selected the CANsmart™ software will automatically strobe your auxiliary lights when you sound your horn. This feature works whether you have the factory horn or SoundBomb™ horn installed. * Deceleration Activated 'Smart Brake' Technology - The CANsmart™ reads vehicle speed in real time to activate your auxiliary brake light during deceleration before you even touch the brake. You can adjust the sensitivity and minimum speed at which the
Smart Brake Feature will activate. * Flash Pattern Braking - The CANsmart™ provides four different flash Article: DENALI CANsmart™ Kit D2, black