The DENALI adapter for BMW style light mounts allows fitment of any DENALI auxiliary light kit on the factory original light mount. Laser cut steel brackets provide excellent support to position the lights securely to the motorcycle. No drilling, cutting or any other modifications are required. Complete your BMW auxiliary light installation with a set of light mount adapters from DENALI!  

Features:   * Fits to BMW original light mounts * Allows fitment of DENALI lights to the factory BMW mounting tabs * No modifications needed * Simple bolt-on installation * Compatible with all DENALI light pods & light kits   What's in the box:   * DENALI light mount adapter (pair) * Mounting hardware * Installation instructions Article: DENALI Crash Bar Light Mount BMW Article: DENALI Crash Bar Light Mount BMW

...

Our new D3 LED lights are built upon a decade of DENALI innovation to deliver the highest performing street-legal fog light to hit the market. Our proprietary fog optics were painstakingly engineered to reach the maximum allowable candela (beam distance) for each of the regulated lighting zones for both the North American SAE/DOT & European Union ECE regulations! The result is a truly unique lens that performs as well as it looks, capable of generating a super-crisp fog beam that is 450 feet long by 350 feet wide at 1 lux (per pair)! No other street-legal fog light even comes close!  Our D3 is also available in our signature Tri Optic™ beam system that provides a spot & hybrid beam option (in the same kit) for drivers wanting uncompromised light output when you need it most.  Features * Best in class street-legal fog beam (SAE/DOT & ECE certified)  * High-Intensity Series Cree LEDs Article: DENALI D3 LED Fog Light, yellow, yellow ...

Our new D3 LED lights are built upon a decade of DENALI innovation to deliver the highest performing 36-watt street-legal driving light to hit the market. Our D3 driving light features our signature Tri Optic™ beam system that

Includes:: a spot & hybrid driving lens with each light pod. Unlike previous Tri Optic™ lights, the D3 hybrid driving beam is ECE & SAE compliant to deliver an impressive street-legal high beam in North America & European Union countries. But what if you're not concerned with street-legal precision & just want off-road outrageous? We got you covered too! The D3 spot lens was engineered for maximum beam distance measuring over 1900 feet at 1 lux (per pair). No other 36-watt light even comes close. The spot beam is so impressive it actually outperforms top-tier competitor's lights that are twice it's size.  Our D3 is also available in an SAE & ECE certified fog beam for drivers seeking a true street-legal fog beam that is super wide & features a crisp horizon...

...

The DENALI D4 2.0 Tri Optic™ LED light kit with Data Dim technology is among the most powerful auxiliary lights on the market, thanks to a stingingly strong quartet of LEDs that help you identify trouble as far as 240m down the road yet still shines brightly to the edges of the road & beyond. Four 10-watt CREE XPL HI LEDs produce a piercing beam of light yet combine to use just 6.6 amps for both lamps.   New with the DENALI 2.0 generation is the industry-leading Tri Optic™ lens system. The D4 is fitted with True-Hybrid™ lenses, providing a combination of spot & flood patterns in each lamp. This configuration gives you 170m of forward light & 42m of visibility to the side. Also in the box are lenses that convert all four LEDs in each lamp to a spot pattern, resulting in a tight, distance-focused beam brilliant out to 240m while still retaining a 33m beam width. Want a third option? Fit Article: DENALI D4 LED Additional Lighting 10W
- Single Light, black, black
...

After 2 years in the making, Denali is thrilled to introduce the highest performing, & most feature-rich 4-inch driving light ever released!  Have you ever wondered what 23, 000 lumens does to a dark landscape?  It will blow your mind! Picture the most powerful driving light ever built, then add a flood beam, spot beam, & hybrid beam, a multi-color DRL mode, two fully dimmable circuits, & the option to change the beam shape & beam color on the fly.  That's the D7 PRO, & it looks even better than it sounds.  The D7 PRO features a split dual-circuit design that allows fully independent on/off & dim of a center flood beam & outer spot beam. Use the revolutionary Dial Dim Switch or CANsmart Controller to effortlessly control all lighting functions from a single halo dimmer switch or the vehicle OEM handlebar controls.  Add to that, the patent pending X-Lens system which means that you can change the center flood or DRL beam color to white, amber, or selective yellow on-the-fly giving... ...

DENALI Dialdim Kit D2 consisting of:   * DENALI Dial Dim Lighting Controller (1x) * DENALI Plug-&-Play Dial Dim™ Wiring Adapter Harley Davidson (1x) * DENALI D2 LED Additional Lighting 10W
- By Unit (2x)  The DENALI D2 2.0 LED Tri Optic™ LED light kit with Data Dim technology produces a remarkable amount of light in a very compact package that is perfect for all styles of riding & types of motorcycles. With a powerful 10-watt Cree LED, the DENALI D2 casts a powerful beam 160m down the road.   Housed in compact aluminum pods, the D2 LED lights are perhaps the most versatile design available; powerful enough to be your “primary” driving light yet small & light enough to comfortably mount on a fender. The DENALI D2s feature durable black powder-coated finishes & special cooling fins to make sure the LED itself runs cool & bright. New for the DENALI 2.0 series is a special Impact PC™ corrosion proof bezel that ensures your lights will continue to look great even after repeated stone an...
...

DENALI Dialdim Kit D2 consisting of:   * DENALI Dial Dim Lighting Controller (1x) * DENALI Plug-&-Play Dial Dim™ Wiring Adapter Tenere (1x) * DENALI D2 LED Additional Lighting 10W
- By Unit (2x)  The DENALI D2 2.0 LED Tri Optic™ LED light kit with Data Dim technology produces a remarkable amount of light in a very compact package that is perfect for all styles of riding & types of motorcycles. With a powerful 10-watt Cree LED, the DENALI D2 casts a powerful beam 160m down the road.   Housed in compact aluminum pods, the D2 LED lights are perhaps the most versatile design available; powerful enough to be your “primary” driving light yet small & light enough to comfortably mount on a fender. The DENALI D2s feature durable black powder-coated finishes & special cooling fins to make sure the LED itself runs cool & bright. New for the DENALI 2.0 series is a special Impact PC™ corrosion proof bezel that ensures your lights will continue to look great even after repeated stone & debris impacts.   Also new with the DENALI 2.0 generation of lighting is the industry-leading Tri Optic™ lens system. Each lamp comes with both spot (installed) & flood (supplied) lenses, nothing else to buy. The spot lens produces the greatest beam distance, while the flood lens produces a broader spread of light closer to the motorcycle, filling the road edge & shoulders. To get the best of both worlds, use a spot lens on one light & a flood lens on the other light for distance illumination & a useful spread of light at close range. No matter which lens you choose, the D2 2.0 light kit lets you see the road (or lack thereof) & be seen by other traffic around you. It’s that simple: See further, be seen better, with DENALI!   Specifications:   * LEDs 10 Watt Cree XPL HI (per lamp) * Power Draw: 1.6 amps (total) * Beam Distance (spot): 160m * Beam Width (spot): 22m * Raw Lumens: 2190 * Intensity: Single Intensity Harness * Data Dim™ Compatible: Yes * Operating Voltage: 12v * Pod Size: Ø55x 60mm Dial Dim™ Lighting Controller Allows to sell a complete solution with easy control of all light functions * Independently turn on/off & dim two sets of auxiliary lights from a single switch * LED halo switch displays your exact settings * Unlock intelligent flash features that can cancel your aux lights with your turn signal, flash your aux lights as a turn signal, or strobe your lights when you sound your horn.   On/ Off & Dim Independently control two sets of lights on/off & intensity level using the single Dial Dim™ Switch. The blue halo controls light set one & the green halo controls light set two. Double click to switch between the two circuits.   High/ Low Sync Your auxiliary lights will automatically switch between your selected dim setting to full intensity with the factory high beam switch. Simply connect the blue input wire to your vehicle high beam circuit to enable this feature.   Stealth Mode A clever 0% dim setting on the switch allows your lights to be 'off' during normal driving conditions but will jump to 100% intensity with your vehicle high beam switch. The lights will also react to turn signal & horn inputs in this mode but will remain off when no inputs are detected.   Cancel with Turn Signal When enabled the main lights (blue circuit 1) will cancel in sync with your signal to prevent 'washing out' your factory turn signal. Simply connect the yellow & orange input wires to your vehicle turn signal circuit to enable this feature.   Flash as Turn Signal When enabled your amber visibility lights (green circuit 2) will flash in sync with your factory turn signals. Simply connect the yellow & orange input wires to your vehicle turn signal circuit to enable this feature.   Strobe with Horn When enabled your auxiliary lights on both circuits will strobe at 4 Hz when you sound your horn. Simply connect the green input wire to your vehicle horn circuit to enable this feature.   Electronically Fused Circuits Both light circuits are electronically fused & can be set right from the switch itself! The halo will illuminate red to notify you when a circuit fused is tripped.   Voltage Display Indicator Upon vehicle startup, the switch halo will flash green to indicate a healthy battery voltage, or flash red to indicate a battery voltage that is below 11.8v.   Low Voltage Cutoff If battery voltage drops below 10.8v the lights will not power on preventing you from being stranded. The switch halo will flash 4 red LEDs to indicate the low voltage condition. This wiring adapter enables plug-&-play connection between our standard Dial Dim Lighting Controller & the Yamaha Tenere 700. To install, simply connect the white connector to our Dial Dim Controller and the remaining connectors in line at the  Tenere 700 headlight, horn, & Article: DENALI Dial Dim Kit D2, white
...

DENALI Dialdim Kit D2 consisting of:   * DENALI Dial Dim Lighting Controller (1x) * DENALI Plug-&-Play Dial Dim™ Wiring Adapter Africa Twin (1x) * DENALI D2 LED Additional Lighting 10W
- By Unit (2x) Dial Dim™ Lighting Controller Allows to sell a complete solution with easy control of all light functions * Independently turn on/off & dim two sets of auxiliary lights from a single switch * LED halo switch displays your exact settings * Unlock intelligent flash features that can cancel your aux lights with your turn signal, flash your aux lights as a turn signal, or strobe your lights when you sound your horn.   On/ Off & Dim Independently control two sets of lights on/off & intensity level using the single Dial Dim™ Switch. The blue halo controls light set one & the green halo controls light set two. Double click to switch between the two circuits.   High/ Low Sync Your auxiliary lights will automatically switch between your selected dim setting to full intensity with the factory high bea...
...

DENALI Dialdim Kit D2 consisting of:   * DENALI Dial Dim Lighting Controller (1x) * DENALI Plug-&-Play Dial Dim™ Wiring Adapter (1x) * DENALI D2 LED Additional Lighting 10W
- By Unit (2x)  The DENALI D2 2.0 LED Tri Optic™ LED light kit with Data Dim technology produces a remarkable amount of light in a very compact package that is perfect for all styles of riding & types of motorcycles. With a powerful 10-watt Cree LED, the DENALI D2 casts a powerful beam 160m down the road.   Housed in compact aluminum pods, the D2 LED lights are perhaps the most versatile design available; powerful enough to be your “primary” driving light yet small & light enough to comfortably mount on a fender. The DENALI D2s feature durable black powder-coated finishes & special cooling fins to make sure the LED itself runs cool & bright. New for the DENALI 2.0 series is a special Impact PC™ corrosion proof bezel that ensures your lights will continue to look great even after repeated stone & debris impacts...
...

DENALI Dialdim Kit D3 consisting of:   * DENALI Dial Dim Lighting Controller (1x) * DENALI Plug-&-Play Dial Dim™ Wiring Adapter (1x) * DENALI D3 LED Fog Light (2x) Our new D3 LED lights are built upon a decade of DENALI innovation to deliver the highest performing street-legal fog light to hit the market. Our proprietary fog optics were painstakingly engineered to reach the maximum allowable candela (beam distance) for each of the regulated lighting zones for both the North American SAE/DOT & European Union ECE regulations! The result is a truly unique lens that performs as well as it looks, capable of generating a super-crisp fog beam that is 450 feet long by 350 feet wide at 1 lux (per pair)! No other street-legal fog light even comes close!  Our D3 is also available in our signature Tri Optic™ beam system that provides a spot & hybrid beam option (in the same kit) for drivers wanting uncompromised light output when you need it most.  Features * Best in class street-legal fog beam (SAE/DOT & ECE certified)  * High-Intensity Series Cree LEDs outputting 2800 lumens per pod  * Data Dim™ 3-wire smart-dimming technology (compatible with all DENALI dimming controllers)  * Dry Seal™ Submersible Waterproof light can withstand the most extreme environments  * Impact PC™ Polycarbonate bezels won't crack, fade or corrode like traditional aluminum bezels.  * Live Active™ Thermal Management keeps the LEDs cool preventing the loss of light output from overheating  * Low profile mounting bracket with stainless steel hardware included  * Amber & selective yellow lenses available (sold separately)  Beam Performance (pair)  * Beam Distance (at 1 lux): 450 feet (137 meters)  * Beam Width (at 1 lux): 300 feet (91 meters)  Specs (single pod)   * Pod

Size: 3.5' (90mm) Round x 3.0' (76mm) Deep * LED: (4x) 11 Watt Cree XP-P LEDs  * Power Draw: 40 Watts (3.3 Amps) * Lumens: 2800 * Data Dim™ Compatible: Yes  * Operating Voltage: 9-32V DC  * IP67 Waterproof & Submersible * Fog Lens Certifications: SAE/DOT J583 & ECE R19  What’s in the Box? * (1x) D3 LED Fog Light Pod  * (1x) Hinge Mounts with M8 Stainless Steel Hardware  * (1x) Wiring Pigtail Dial Dim™ Lighting Controller Allows to sell a complete solution with easy control of all light functions * Independently turn on/off & dim two sets of auxiliary lights from a single switch * LED halo switch displays your exact settings * Unlock intelligent flash features that can cancel your aux lights with your turn signal, flash your aux lights as a turn signal, or strobe your lights when you sound your horn.   On/ Off & Dim Independently control two sets of lights on/off & intensity level using the single Dial Dim™ Switch. The blue halo controls light set one & the green halo controls light set two. Double click to switch between the two circuits.   High/ Low Sync Your auxiliary lights will automatically switch between your selected dim setting to full intensity with the factory high beam switch. Simply connect the blue input wire to your vehicle high beam circuit to enable this feature.   Stealth Mode A clever 0% dim setting on the switch allows your lights to be 'off' during normal driving conditions but will jump to 100% intensity with your vehicle high beam switch. The lights will also react to turn signal & horn inputs in this mode but will remain off when no inputs are detected.   Cancel with Turn Signal When enabled the main lights (blue circuit 1) will cancel in sync with your signal to prevent 'washing out' your factory turn signal. Simply connect the yellow & orange input wires to your vehicle turn signal circuit to enable this feature.   Flash as Turn Signal When enabled your amber visibility lights (green circuit 2) will flash in sync with your factory turn signals. Simply connect the yellow & orange input wires to your vehicle turn signal circuit to enable this feature.   Strobe with Horn When enabled your auxiliary lights on both circuits will strobe at 4 Hz when you sound your horn. Simply connect the green input wire to your vehicle horn circuit to enable this feature.   Electronically Fused Circuits Both light circuits are electronically fused & can be set right from the switch itself! The halo will illuminate red to notify you when a circuit fused is tripped.   Voltage Display Indicator Upon vehicle startup, the switch halo will flash green to indicate a healthy battery voltage, or flash red to indicate a battery voltage that is below 11.8v.   Low Voltage Cutoff If battery voltage drops below 10.8v the lights will not power on preventing you from being stranded. The switch halo will flash 4 red LEDs to indicate the low voltage condition. This wiring adapter enables plug-&-play connection between our standard Dial Dim Lighting Controller & the Harley-Davidson Pan America Article: DENALI Dial Dim Kit D3 Foglight, white

...