ODI revamped the popular Lock On MX Grip to make it even better. The Lock-On Grip System means that you can change or replace grips in seconds without the need for any wire ties or glues. They also offer 100% gauranteed slip-free performance under any conditions.   Features: • 100% Slip-Free Performance Guaranteed • Simple Installation & Removal Without Waiting for Glue to Dry • Throttle Tube Included with Snap-On Throttle Cam to match more models • Easy knockout ends to accommodate Full-Wrap handguards • Kit provides Cams for both 2 & 4-Stroke Applications • THROTTLE CAMS INCLUDED IN THE KIT: B, C, D, J, K & M. **PLEASE REVIEW “APPLICATION GUIDE” TO ENSURE THE APPROPRIATE CAM IS INCLUDED FOR YOUR BIKE.** AN ADDITIONAL THROTTLE CAM MAY BE NECESSARY & ARE AVAILABLE FOR AN ADDITIONAL CHARGE. Article: ODI MX V2 Rogue Grips Half Waffle Lock On
- Graphite, black
...

The ODI Oversized Handlebar Mounts are designed to replace your stock OEM 22, 2mm (7/8') Handlebar Mounts when upgrading to “oversized” 28, 6 mm (1-1/8”) Diameter Handlebars such as the ODI CFT Podium or Podium FLIGHT Handlebars. They can be used for standard or “ Rubber Mounted” Triple Clamps found on Honda & Kawasaki Motocross & Off-Road Motorcycles. BAR MOUNT

Features: * Made from sturdy 6061 grade alloy for enhanced strength & durability * Chamfered clamp surface reduces handlebar stress on impact * Designed to fit both standard & rubber mounted triple-clamps * 5mm offset *

Includes:: the following mounting hardware: 2x M12-70mm long chromoly hex-head bolts 2x M12-50mm long chromoly hex-head bolts 2x M12 lock washers & nylon lock nuts INSTALLATION NOTES: Please refer to your owner’s manual for specifications regarding OE torque settings. Should your rubber mounted cones show signs of wear or deterioration, replace them prior to installation. Always be sure all bolts are secure an...



...

PEE WEE 19mm Race Handlebar Part of the PEE WEE PODIUM HANDLEBAR UPGRADE KIT Designed specifically for the PW50 with 3/4" (19mm) Handlebar Diameter.

Includes:: Billet Aluminum Bar Mounts, Billet Rear Brake Perch with rotational clamp & SX8 EVA High-Density Handlebar Pad. Built for PEEWEE 50’s with ¾”diameter handlebar. Specifically designed for riders looking for a taller bar more aggressive bar with less sweep for racing.  * PEE-WEE ¾” (19mm) Diameter to match OEM sizing * Constructed of durable 7075 heat treated Alloy * Solid ODI Crossbar for enhanced strength * Knurled left slide improves grip-to-bar adhesion * Laser Etched ODI graphics The full kit

Includes:: :  * PEE WEE 19mm Race Handlebar * DIMENSIONS: 620w/84h/65r/145c/65s/160controls * 6061 Billet Aluminum Bar Mounts * Billet Rear Brake Perch with rotator (designed for use with OEM Lever) * SX8 EVA High-Density Handlebar Pad Article: ODI Pee-Wee MX Handlebar Black
- Ø19mm, red, Size 10 mm




...

Designed specifically for the PW50 with 3/4" (19mm) Handlebar Diameter.

Includes:: Billet Aluminum Bar Mounts,

...

Rear Brake Perch 19mm Part of the PEE WEE PODIUM HANDLEBAR UPGRADE KIT Designed specifically for the PW50 with 3/4" (19mm) Handlebar Diameter.

Includes:: Billet Aluminum Bar Mounts, Billet Rear Brake Perch with rotational clamp & SX8 EVA High-Density Handlebar Pad. Built for PEEWEE 50’s with ¾”diameter handlebar. Specifically designed for riders looking for a taller bar more aggressive bar with less sweep for racing.  * PEE-WEE ¾” (19mm) Diameter to match OEM sizing * Constructed of durable 7075 heat treated Alloy * Solid ODI Crossbar for enhanced strength * Knurled left slide improves grip-to-bar adhesion * Laser Etched ODI graphics The full kit

Includes:: :  * PEE WEE 19mm Race Handlebar * DIMENSIONS: 620w/84h/65r/145c/65s/160controls * 6061 Billet Aluminum Bar Mounts * Billet Rear Brake Perch with rotator (designed for use with OEM Lever) * SX8 EVA High-Density Handlebar Pad Article: ODI Pee-Wee Rear Brake Perch
- Ø19mm, red




...

ODI's MX Handlebars are constructed of 7075 Heat Tempered Alloy. The 7/8' bar is designed for riders looking for a stock replacement or feel.  Available in multiple bend options this bar is ideal for MX, Off-Road, Mini-Bike, ATV or PWC racers. PRODUCT

Features: * Constructed of 7075 Heat Tempered alloy * Shot peened & hard anodized finish for enhanced strength * 7/8' diameter to work on many OEM Dirt Bike, Mini MX, ATV & PWC Race clamp diameter * Solid crossbar improves strength * Laser Etched ODI graphics * Knurled left slide helps with grip bar adhesion *

Includes:: ODI 50mm SX8 EVA Handlebar Pad * Multiple bend options available. Article: ODI Pum 7/8" Handlebar
- 701 Honda/ Kawa OE




...

ODI's MX Handlebars are constructed of 7075 Heat Tempered Alloy. The 7/8' bar is designed for riders looking for a stock replacement or feel.  Available in multiple bend options this bar is ideal for MX, Off-Road, Mini-Bike, ATV or PWC racers. PRODUCT

Features: * Constructed of 7075 Heat Tempered alloy * Shot peened & hard anodized finish for enhanced strength * 7/8' diameter to work on many OEM Dirt Bike, Mini MX, ATV & PWC Race clamp diameter * Solid crossbar improves strength * Laser Etched ODI graphics * Knurled left slide helps with grip bar adhesion *

Includes:: ODI 50mm SX8 EVA Handlebar Pad * Multiple bend options available. Article: ODI Pum 7/8" Handlebar
- 707 Champ




...

ODI's MX Handlebars are constructed of 7075 Heat Tempered Alloy. The 7/8' bar is designed for riders looking for a stock replacement or feel.  Available in multiple bend options this bar is ideal for MX, Off-Road, Mini-Bike, ATV or PWC racers. PRODUCT

Features: * Constructed of 7075 Heat Tempered alloy * Shot peened & hard anodized finish for enhanced strength * 7/8' diameter to work on many OEM Dirt Bike, Mini MX, ATV & PWC Race clamp diameter * Solid crossbar improves strength * Laser Etched ODI graphics * Knurled left slide helps with grip bar adhesion *

Includes:: ODI 50mm SX8 EVA Handlebar Pad * Multiple bend options available. Article: ODI Pum 7/8" Handlebar
- 725 KTM 50SX




...

ODI's MX Handlebars are constructed of 7075 Heat Tempered Alloy. The 7/8' bar is designed for riders looking for a stock replacement or feel.  Available in multiple bend options this bar is ideal for MX, Off-Road, Mini-Bike, ATV or PWC racers. PRODUCT

Features: * Constructed of 7075 Heat Tempered alloy * Shot peened & hard anodized finish for enhanced strength * 7/8' diameter to work on many OEM Dirt Bike, Mini MX, ATV & PWC Race clamp diameter * Solid crossbar improves strength * Laser Etched ODI graphics * Knurled left slide helps with grip bar adhesion *

Includes:: ODI 50mm SX8 EVA Handlebar Pad * Multiple bend options available. Article: ODI Pum 7/8" Handlebar
- 726 KTM OE




...

ODI's MX Handlebars are constructed of 7075 Heat Tempered Alloy. The 7/8" bar is designed for riders looking for a stock replacement of feel. Available in multiple bend options this bar is ideal for MX, Off-Road, Mini-Bike, ATV or PWC racers. PRODUCT

Features: * Constructed of 7075 Heat Tempered alloy * Shot peened & hard anodized finish for enhanced strength * 7/8" diameter to work on many OEM Dirt Bike, Mini MX, ATV & PWC Race clamp diameter * Solid crossbar improves strength * Laser Etched ODI graphics * Knurled left slide helps with grip bar adhesion *

Includes:: ODI 50mm SX8 EVA Handlebar Pad * Multiple bend options available. Article: ODI Pum 7/8" Handlebar
- 727 KTM Super Mini




...