Vast selection of commonly used tools for the workshop & around the home contained inside a steel cantilever toolbox. Featuring a 45-tooth reversible ratchet, 16oz claw hammer, combination pliers, side cutters, a range of screwdrivers, a tape measure & a wide selection of screwdriver bits, sockets & hex keys. Lining the toolbox are high density foam inserts to help organise storage & clearly spot when tools are missing. Cantilever toolbox manufactured from sheet steel with five trays & measuring 420 x 200 x 200mm. Contents: 1 x 3/8" Ratchet wrench 1 x 75mm 3/8" Square drive extension bar 2 x Spark plug sockets 16mm & 21mm 1 x 3/8 (F) x 1/4" (M) Adaptor 10 x 3/8" Sockets: 9, 10, 11, 12, 13, 14, 15, 16, 17 & 19mm 8 x 3/8" Sockets: 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, & 3/4" 10 x 1/4" Sockets: 4, 5, 6, 7, 8, 9, 10, 11, 12 & 13mm 10 x 1/4" Sockets: 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, & 1/2" 3 x 1/4" E Sockets: E6, E7 & E8 1 x 1/4" Screwdriver bit driver 1 x 1/4" Hex bit holder (60mm) 19 x 1/4" Hex 25mm CRV screwdriver bits: PH0, PH1, PH2, PH3, PZ1, PZ2, PZ3, H3, H4, H5, H6, SL4, T8, T10, T15, T20, T25, T27 & T30 1 x 1/4" Hex x 1/4" Square drive adaptor 8 x Metric hex keys: 1.5, 2, 2.5, 3, 4, 5, 5.5 & 6mm 8 x Imperial hex keys: 1/16, 5/64, 3/32, 1/8, 5/32, 3/16, 7/32, & 1/4" 1 x 16oz BS876 Claw hammer 1 x 5m Tape measure 1 x 150mm Combination pliers 1 x 150mm Side cutters 2 x Plain slot screwdrivers
- 5x 75mm & 6x 100mm 2 x Cross slot screwdrivers
- PH1 x 75mm & PH2x 100mm 6 x Combination spanners: 8, 10, 12, 13, 14 & 17mm 1 x 18mm Utility knife 1 x Scissors 25 x 150mm Cable ties 1 x Cantilever tool box

...

This indirect far infrared diesel heater with flue kit features a remote control & digital thermostat for easy heat control. It is economical, low noise, odourless & highly cost efficient to run. This heater consumes only 40W of electricity to keep the burner operating & it consumes as little as 0.9 litres of diesel fuel per hour. Unlike traditional fan heaters, infrared heat spreads evenly in all directions. It can be used indoors & semi-enclosed areas, with the installation of the supplied flue kit. Designed for heating spaces of Approx. 66m-square
- ideal for heating outbuildings, garages, greenhouses & workshops. It is fitted with wheels for manoeuvrability. The remote control is supplied with Lithium CR2025 battery.
...

This indirect far infrared diesel heater with flue kit features a remote control & digital thermostat for easy heat control. It is economical, low noise, odourless & highly cost efficient to run. This heater consumes only 50W of electricity to keep the burner operating & it consumes as little as 1.2 litres of diesel fuel per hour. Unlike traditional fan heaters, infrared heat spreads evenly in all directions. It can be used indoors & semi-enclosed areas, with the installation of the supplied flue kit. Designed for heating spaces of Approx. 85m 2
- ideal for heating outbuildings, garages, greenhouses & workshops. It is fitted with wheels for manoeuvrability. The remote control is supplied with Lithium CR2025 battery. Highly efficient to run consuming just 50W of electricity & 1.2 litres of diesel fuel per hour Low noise & it heats evenly in all directions Comes with a remote control for ease of operation Thermostatically controlled with easy to use control panel & digital display Supplied with flue kit for a more permanent installation & it must be used in indoor areas that are not well-ventilated
...

This indirect far infrared diesel heater with flue kit features a remote control & digital thermostat for easy heat control. It is economical, low noise, odourless & highly cost efficient to run. This heater consumes only 50W of electricity to keep the burner operating & it consumes as little as 1.7 litres of diesel fuel per hour. Unlike traditional fan heaters, infrared heat spreads evenly in all directions. It can be used indoors & semi-enclosed areas, with the installation of the supplied flue kit. Designed for heating spaces of Approx. 110m 2
- ideal for heating outbuildings, garages, greenhouses & workshops. It is fitted with wheels for manoeuvrability. The remote control is supplied with Lithium CR2025 battery.
...

This lightweight & simple to use tiller will have borders, vegetable plots or allotments turned super quickly. It saves valuable time & effort compared to using a fork or spade. The adjustable blades allow the user to work in tight spaces, such as flower beds or with the addition of the two outer rotors, the work area can be easily increased. ...

H&-held dual reading gauge with flexible 250mm long hose. Swivel angled tyre connection & air release valve. Large easy-to-read scale graduated 5-100psi in increments of two psi & 0.5-6bar in increments of 0.1 bar. ...

Features: Interchangeable base & finger plates, Hook & loop base pads, Dust collection box & extraction facility. Supplied
...

For use on 14-23mm diameter track rods This track rod end tool is for loosening & adjusting stubborn track rods. The solid forged steel head & jaws allow more torque for less effort while the large surface area of the serrated jaws help prevent damage to the track rod. ...

The Draper TRRT-4PC Tool Kit is designed for easy removal & installation of ball joints on track rods. Knurled handle provides extra grip & three interchangeable heads offer complete versatility. Supplied with robust impact resistant plastic carrying box. ...

For the easy removal & installation of track rod knuckles with the knurled handle for extra grip. ...