Redesigned from the ground up-the all new R300DCT electric disc cutter is the simplest tool for cutting concrete, reinforced concrete, stone, brick, paving & more! It has an enhanced cut capacity of 115mm vs the existing model making this one of the deepest cutting 300mm machines on the market! The high torque 2400W electric motor delivers consistent peak power & stops the machine from slowing down under heavy load. The motor starts first time, every time & does not emit any harmful fumes making this suitable for use indoors or in enclosed spaces. Plus, you don't need to worry about expensive fuel or servicing! It features a wheeled skid plate which makes light work of long, ground level cuts & it also lifts the blade off the ground so it can be put down even while the blade is spinning. This saw utilises Power Protect Technology which protects internal parts from dust & water ingress for longer tool life & comes backed by a 3 year guarantee. Try it for yourself! ...

Born to conquer the professional job site, the all new R300DCT+ electric disc cutter is the perfect masonry saw for the pro’s when effective dust control is a must. It has an impressive cut depth of 115mm making this one of the deepest cutting 300mm machines on the market. The built-in dust suppression features dual sided water delivery, armoured hose routing & robust brass hose connection & is compliant with dust management regulations. This saw comes armed with a 300mm premium diamond blade packed with 35% more diamond* & features a multi-compound cutting edge designed to cut faster, cleaner & for longer. The high torque 2000W electric motor delivers consistent peak power & stops the machine from slowing down under heavy load. It starts first time, every time & does not emit any harmful fumes making this suitable for use in enclosed spaces. Plus, you don't need to worry about expensive fuel or servicing allowing you to focus on the job. The wheeled skid plate takes the strain out of long, ground level cutting & also means that you can put the saw down while the blade is still spinning. This saw utilises our Power Protect Technology which protects internal parts from dust & water ingress making it fit for use in the most demanding environments & comes backed by a 3 year guarantee. ...

Born to conquer the professional job site, the all new R300DCT+ electric disc cutter is the perfect masonry saw for the pro’s when effective dust control is a must. It has an impressive cut depth of 115mm making this one of the deepest cutting 300mm machines on the market. The built-in dust suppression features dual sided water delivery, armoured hose routing & robust brass hose connection & is compliant with dust management regulations. This saw comes armed with a 300mm premium diamond blade packed with 35% more diamond* & features a multi-compound cutting edge designed to cut faster, cleaner & for longer. The high torque 2400W electric motor delivers consistent peak power & stops the machine from slowing down under heavy load. It starts first time, every time & does not emit any harmful fumes making this suitable for use in enclosed spaces. Plus, you don't need to worry about expensive fuel or servicing allowing you to focus on the job. The wheeled skid plate takes the strain out of long, ground level cutting & also means that you can put the saw down while the blade is still spinning. This saw utilises our Power Protect Technology which protects internal parts from dust & water ingress making it fit for use in the most demanding environments & comes backed by a 3 year guarantee.* Vs Evolution general purpose diamond blade. ...

The R355CPS cuts a variety of materials including steel, with ready-to-weld, accurate, clean & square cold-cuts with no hot sparks or burrs, leaving an instantly workable finish. This device can also handle aluminium, wood with embedded nails, plastic, copper & more thanks to the 36 tooth TCT blade & optimised gearbox & motor speed. Included: 355mm Multi-Material Cutting TCT Blade (Fitted), Instruction Manual, 8mm (Blade Change) Allen Key, V-Block. CUTTING CAPACITIES Mild Steel Plate (Max Thickness): 6mm Stainless Steel Plate (Max Thickness): 5mm Square Tube at 90° (Mild Steel): 120 x 120mm Square Tube at 45° (Mild Steel): 89 x 89mm Rectangle Tube at 90° (Mild Steel): 95 x 180mm Rectangle Tube at 45° (Mild Steel): 78 x 110mm Round Tube at 90° (Mild Steel): & Oslash; 130mm Round Tube at 45° (Mild Steel): & Oslash; 105mm Minimum Cut Off Piece Length: 8 mm Optional diamond blade cuts stone, concrete & brick (Sold separately) ...

The R355CPS cuts a variety of materials including steel, with ready-to-weld, accurate, clean & square cold-cuts with no hot sparks or burrs, leaving an instantly workable finish. The unit cuts aluminium, wood with embedded nails, plastic, copper & more thanks to the 36 tooth TCT blade & optimised gearbox & motor speed. Included: 355mm Multi-Material Cutting TCT Blade (Fitted), Instruction Manual, 8mm (Blade Change) Allen Key, V-Block. CUTTING CAPACITIES Mild Steel Plate (Max Thickness): 6mm Stainless Steel Plate (Max Thickness): 5mm Square Tube at 90° (Mild Steel): 120 x 120mm Square Tube at 45° (Mild Steel): 89 x 89mm Rectangle Tube at 90° (Mild Steel): 95 x 180mm Rectangle Tube at 45° (Mild Steel): 78 x 110mm Round Tube at 90° (Mild Steel): & Oslash; 130mm Round Tube at 45° (Mild Steel): & Oslash; 105mm Minimum Cut Off Piece Length: 8 mm Optional diamond blade cuts stone, concrete & brick (Sold separately) ...

Easily cuts Steel, Aluminium, Wood (even wood with nails), Copper & Plastics. The cut through steel is fast & clean producing no burr or heat. Featuring a twin blade system, where the blades spin in opposite directions – one counteracts the other, resulting in virtually no kickback. Ideal for plunge cuts & work in tight areas. Download Product

Specification Sheet 230V Version available here

...

Easily cuts Steel, Aluminium, Wood (even wood with nails), Copper & Plastics. The cut through steel is fast & clean producing no burr or heat. Featuring a twin blade system, where the blades spin in opposite directions – one counteracts the other, resulting in virtually no kickback. Ideal for plunge cuts & work in tight areas. Download Product

Specification Sheet 110V Version available here

...

This incredibly useful, multi-purpose saw cuts both ferrous & non-ferrous metals quickly, cleanly & efficiently. Its real versatility, however, lies in the fact that not only will it cut metal but it will also happily saw through aluminium, plastic & u PVC, even hard & soft timbers too! This product comes with a fantastic three year warranty. Register your product warranty here. ...

Replacement blade fits: RAGE Multipurpose Circular Saw, RAGE4 Mulitipurpose Advan-Saw & OUTRAGE 36V Li-Ion Cordless Multipurpose Circular Saw. Advanced TCT technology enables Steel, Aluminium & Wood (even wood with nails) to be cut with this single blade. Please Note
- This blade is only suitable for the RAGE Saws.
...

Replacement blade fits: RAGE2 Multipurpose Cut Off Saw. Advanced TCT technology enables Steel, Aluminium & Wood (even wood with nails) to be cut with this single blade. Please Note
- This blade is only suitable for the RAGE2 Saw.
...