The Laser 6161 is a suspension checker which can test the amount of play & wear in a vehicle's suspension. This tool is designed to be used in conjunction with a 1/2'' power bar. ...

The Laser 6162 pre chamber removal adaptor & slide hammer kit for Mercedes Benz comes supplied with a double ended adaptor incorporating M22x 1mm & M22x 1.5mm threads in one adaptor. This tool is used to remove the pre-chamber from the cylinder head on early indirect injection Mercedes diesel engines. ...

The Laser 6163 is designed to install or remove the bush on the vehicle without the need to disconnect the brake lines or removal of the bush positioning bolts or mounting plates. This unit will work with Ford Mondeo Mk IV 2007-2013, Galaxy 2006-2010, S-Max 2006-2013 plus Volvo S60 II, S80 II, XC60, XC70 II, V60, V70 III 2006-2013. ...

The Laser 6165 is an internal bearing puller set supplied with chrome plated slide hammer with 300mm working shaft. This unit is also supplied with a chrome plated slide hammer with 300mm working shat &

Includes:: a space collar & tapered bolt. This set

Includes:: adapters with diameters of: 8mm/10mm x 100mm, 12mm/15mm /17mmx 60mm, 20mm x 95mm, 25mm/30mm/32mm x 60mm



...

The Laser 6167 is a high quality & accurate detachable-head, mechanical torque wrench supplied with a 1/4" drive ratchet head, plus a selection of open ended spanner heads. This set enables accurate tensioning of difficult to access fasteners & is particularly useful when changing the cambelt, & for critical items like idler pulleys, tensioner pulleys, balance shafts, where access at the front or side of the engine is often tight. The torque spanner features a display range of 10
- 50 Nm (7.4 – 36.9 ft/lb) with an accuracy of ±4% (right-hand thread torque measurement only). Included in the set is a reversible 1/4" drive ratchet head, plus 8 open ended spanner heads including: 7, 8, 9, 10, 11, 12, 13, 14mm This unit comes supplied with calibration certificate & the set comes complete in a fitted plastic blow-mould case for easy storage.
...

The Laser radial brake caliper are used on radially mounted brake calipers to allow safe replacement of the brake pads, while reducing the risk of the caliper hitting & damaging the ceramic brake discs. This tool is designed to be used with Audi Q7, Volkswagen Touareg & Porsche Cayenne models. Completing this pin set is a reliable manufacture in Sheffield & and a unique design that allows the caliper to sit on while the pads/ discs are replaced. ...

The Laser 6190 is a fuel sender spanner that can be used with the following vehicle models: Audi A3/A4/A6/A7/A8, Q3/Q5/Q7, R8, TT, Volkswagen Polo, Beetle, Golf, Golf Plus, Golf Cab, Jetta, Eos, Scirocco, Passat, Passat CC, CC, Sharan, Touran, Tiguan, Touareg, Phaeton, Caddy, Transporter including LCV models. Completing this handy tool is an all steel construction & a 1/2'' drive that provides a safe grip on the sender ring to prevent damage & 120mm internal diameter with three slotted teeth to grip the ring securely. ...

The Laser 6191 is required when replacing the crank seal & when you remove the front engine cover to replace the chain. This kit can be used with Duratorq engines with the Ford Transit, Ranger with 2.0/2.2/2.4/3.2 TDCi/TDDi engines, plus Jaguar X Type X400 & Land Rover Defender. ...

The Laser 6192 is designed to remove locking rings on the following vehicles: Vauxhall/ Opel Applications include: Antara from 2007, Astra-J from 2010, Insignia from 2009, SIGNUM 2003 to 2008, Vectra-C 2003 to 2008. Equivalent to Vauxhall/ Opel OEM EN-48279 Mercedes Benz W204/W207/W212 E & C Class BMW/F01/F02/F10/F12, 7, 6 & 5 series Volvo T4/T5 engine 2010 onwards & S40, V40 ...

For use with Land Rover vehicles, the Laser 6193 is a rear suspension upper hub bush remover & installer. This unit is completed with a reliable manufacture & manufacture in Sheffield. ...