This tool is used to assist in the diagnosis of an airbag light being constantly on. This set can assist in the diagnosis of a failed air bag unit, failed airbag clock spring, seat-belt pre-tensioners ect. Simply connect in place of the air bag unit to allow the system to test for easy confirmation of component failure. The tool is a 2.5 Ohm resistor with two pin probes & when connected to the associated wiring effectively becomes a dummy airbag. In the UK in 2013 new legislation came in, meaning that MOTs have become stricter in relation to airbags. From this date all airbag warning lights (SRS malfunction warning lights) on the dashboard must light up when the ignition is turned on & must go out once the car is started. Making this a must have set for all garages. ...

The Laser 6325 is part of the range of engine timing tools for GM/SAAB models. This unit works with the following vehicles: Vauxhall/ Opel Signum Turbo 2003-2008, Vectra-C Turbo 2002-2008 Saab 9-3 1.8T 2002-2011, 9-3 1.8T Bio Power 2002-2011, 9-3 2.0t 2002-2012, 9-3 2.0t Bio Power 2010-2012, 9-3XT 2009-2011 Engine codes: Z20NET, B207E, B207, B207L OEM KM-J 38122-A, KM 6362-1, KM 6362-2, KM 6077, 83 96 210, EN-48366-01, EN-48366-002, 83 96 392 Completing this handy tool is a reliable build in Sheffield. ...

The Laser 6328 is designed to remove air brake filters from commercial vehicles which can be extremely tight & difficult to remove without the correct tool. This unit has a size range of 104
- 150mm with a leg length of 64mm. This tool is also spring loaded meaning the product can be driven by a 1/2'' Drive power bar or 24mm ratchet or wrench.
...

This brake rewind tool from Laser features an adjustable adaptor which will fit pistons with a pin distance between 20
- 35 millimetres,
...

The Laser 6332 is a 1/2'' drive crankshaft rotator for use with Man Atego/ Vario HGV vehicles. This unit benefits from a phosphate finish & S45C steel manufacture for added reliability. ...

The Laser 6348 is an engine timing tool kit for use with 1.2/1.4TSI four cylinder, petrol engines. This tool is compatible with the following car models: Audi A1, A3, Q3, Volkswagen Golf VII, Passat, SV, Sportsvan, Polo, Jetta, Seat, Leon, Leon ST, & Skoda Octavia III, Fabia III from 2012 onwards ...

The Laser 6349 is designed for use with all Ducati multistrada models fitted with Sachs type forks. This tool can be driven by a 1/2"drive ratchet or a 27mm ring spanner & is completed with a robust design & manufacture. ...

This stretch belt fitting tool is for use on BMW vehicles fitted with the N52K 3.0L petrol engine for instances where a separate stretch belt is used to drive the air conditioning pump. ...

The Laser 6355 is used for the removal & refit of the front suspension bush with minimum dismantling. This unit is designed to be used with the Discovery 3 & 4 (2004 on), Range Rover Sport (2005 on) & is completed with a robust build, making it ideal for garages & workshops. ...

The Laser 6356 is designed to be used with an impact gun to remove both rear & front fixings that have been over tightened or partially seized. This tool is designed to be used with Ducati Super Bike 1098, 1198, 1199, Panigale, Street fighter 1098, Multistrada 1200 & Diavel models & benefits from a durable SCM440 alloy steel manufacture for extra reliability. ...