Glow plug connector pliers for removing sheathed glow plug connectors ...

Tyre Valve Connector with 14;” BSP fitting. ...

Laser Tools has just introduced this innovative workshop blow gun specifically designed for valeting & cleaning chores. This Turbo Pulse Blow Gun is the perfect tool for the valeter with an eye for detail. It has a strong turbo vortex which is pulsed directly through the rotating head. This rotates on a continuous 360-degree spin which lifts & blows dirt & dust out of every nook & cranny. Perfect for car interiors & upholstery. Very impressive when it quickly removes stubbornly entwined pet hairs from non-woven vehicle interior fabrics. ...

A 1/2" & 3/4" drive Crowsfoot wrench set, manufactured from SCM-440 steel for superior strength. Sizes covered 33/36/38/41/46/50mm ...

The Laser 7435 is manufactured from durable chrome vanadium & is designed for safe use on live circuits up to 1000V AC or 1500V DC. ...

A security hex bit for use on tamper proof hex fittings 2mm to 14mm ...

Battery terminal ratchet wrench with twin head 8 x 10mm 72 teeth. ...

Go Thru' angled socket wrench in metric sizes, manufactured from CV6140 steel. Sizes 6-13 mm 6 & 12 point. The Go-thru function makes it absolutely ideal to be used with long threaded rods. ...

In your busy workshop there are countless ways for threads to get damaged: knocking a track rod end with a hammer; cutting a bolt or threaded rod to length; driving a driveshaft out of a hub — the threaded ends get torn & squashed. Wheel studs get damaged just by removing & refitting the wheels… Luckily there is a quick & easy solution from Laser Tools: the external deburr & chamfer tool! The chamfer tool is designed to be used with an electric drill & is fitted with a 1/4" quick-chuck shaft, maximum recommended speed is 400rpm. The tool is fitted with three super-hard High Speed Steel blades that make light work of repairing damaged bolts & damaged threads. The blades cut quickly & cleanly & are effective on stainless steel, hardened steel, mild steel, copper, brass, wood, fibreglass, & even hard plastic. Bolts, studs & threaded rod, size range from 3mm right up to 19mm. Hammer-damage or squashed & flattened threads will stop the retaining nut or wheel nut screwing back on; a couple of zaps from the deburr/chamfer tool solves the problem instantly. Cutting steel or copper pipe can leave an uneven edge that can stop an olive or tube nut being slid on. A gentle touch with the tool leaves a nicely chamfered edge, & the olive slides straight on. ...

The 7511 Flywheel Locking Tool is a Laser Tools EU registered design. Unique in its design & simplicity, this tool is designed to allow the user to quickly & simply lock the flywheel via the ring gear when removing the clutch, flywheel or front pulleys during engine strip down or clutch replacement. It can also be used to lock the ring gear when checking the dual mass flywheel play. ...