More From Contributor

A must for the keen home mechanic or workshop this truing stand holds the wheel firmly, allowing for free movement & adjustment. Designed to fit hubs with diameters of 100mm & 135mm, which are then held in place using the wheels usual fixings. It features a radial gauge, enabling you to check any up & down movement the rim may have, & two lateral probes to check any side to side movement & straighten if necessary. ...

Available

By hooking on to one of the pedals & supporting under the wheels, this wall mounted bike holder allows a bicycle to be stored on a wall out of the way. The pedal bracket is angled downwards so the bike is held away from the wall to help avoid marking either the bike or the wall. This also makes it easier to hook the pedal in & out of when lifting the bike on & off the holder ...

Available

A compact kit, perfect to take out on the road, that offers a solution for having to replace a broken cable miles from home in an emergency. It contains cables with two different diameters, catering for both gear & brake applications & a selection of cable end adaptors to carry out a temporary or 'get you home' repair. ...

Available

Owning your own workshop stand is essential for any keen home mechanic. This fully adjustable, & strong stand allows for the bike to be set at a comfortable working height. The clamp fits 20mm
- 55mm diameter tubes & seat posts, & can be rotated through 360°. It also

Includes:: a stabilising bar to hold the handlebars in place, to prevent them from turning when working on the front of the bike, & a magnetized organizer tray to keep tools & small parts to h&.

...

Available

Oval rear view mirror providing a wide field of vision together with an easy & safe way to see the traffic behind at a glance. It pushes into the end of any straight, raised or traditional shaped handlebars & is easy to rotate & adjust. ...

Available

For the installation & removal of the lockring on both Shimano HG & SRAM cassettes, when used together with a 24mm spanner or socket & a cassette holding tool or chain whip. It can also be used on Centerlock brake discs that use a 12-spline (Ø23.4mm) lockring. ...

Available

This freewheel remover not only a fits Shimano freewheels, allowing for their quick & easy removal so that wheel bearings & axles can be accessed, but it is also suitable for use on Campagnolo Cassette lockrings when used with a holding tool or chain whip. ...

Available

Fixes onto the drive side of the frame, in place of the rear wheel, keeping the chain tensioned & held away from the frame. The chain sits in a roller, which allows the cranks to be rotated, making this ideal to be used when cleaning the chain & derailleur ...

Available

Fixes into the frame in place of the rear wheel, being held in place by the bikes thru axle, keeping the chain tensioned & held away from the frame. The chain sits in a roller, which allows the cranks to be rotated, making this ideal to be used when cleaning the chain & derailleur. It can also be adjusted to fit dropout spacings from 135mm to 150mm, meaning that the rear of the frame cannot be compressed or damaged during transport ...

Available

Used for the installation of a fork crown race, the lowest part of a headset. Ensures the race is correctly fitted & set, without causing damage to either the forks or the crown race & bearing surface. Simply select the correct size adaptor so that it sits on the outside shoulder of the crown race, slide the setting tool onto the fork steerer & tap the end cap firmly with a dead blow hammer until the race has been seated. ...

Available

Laser Laser 8196 LTR Headset Cup/BB Cup Press Tool

Allows for the quick and easy installation of headset cups and press fit bottom brackets, without risking any damage to the frame. The stepped cup guides ensure the cups are correctly supported and sitting straight when being pressed into the frame. The handles have a cushioned grip and the fine thread makes it smooth to turn and also allows for precise adjustment when applying the force necessary to press the cups into the frame. It also features a quick release system so that it does not have to be fully unwound to be removed from the frame.

Availability: In Stock
Supplier: Machine Mart
SKU: 040213518

Description Reviews / Comments Add New

Product Description

Allows for the quick & easy installation of headset cups & press fit bottom brackets, without risking any damage to the frame. The stepped cup guides ensure the cups are correctly supported & sitting straight when being pressed into the frame. The handles have a cushioned grip & the fine thread makes it smooth to turn & also allows for precise adjustment when applying the force necessary to press the cups into the frame. It also features a quick release system so that it does not have to be fully unwound to be removed from the frame.

Reviews/Comments

Add New

Intelligent Comparison

Available

Laser Laser 8167 LTR Headset Cup Removal Tool Machine Mart

£20.99

Supplier Information

Machine Mart

Get the job done with Machine Mart (http://www.machinemart.co.uk)! Explore our extensive range of power tools, hand tools, workshop equipment, and more, designed to tackle any DIY project or professional task with ease. From robust drills and saws to sturdy workbenches and storage solutions, we provide everything you need to build, repair, and maintain your home or workplace. With top brands like DeWalt, Makita, and Clarke, you can trust in quality and reliability. Plus, enjoy expert advice, unbeatable prices, and convenient delivery options. Shop now and unleash your potential with Machine Mart!

More From Contributor

Laser Laser 8196 LTR Headset Cup/BB Cup Press Tool

Product Description

Reviews/Comments

Add New

Intelligent Comparison

Price History

Vouchers

Facebook

Jargon Buster

Supplier Information

Community Generated Product Tags

Contact Us

Information

My Account