Fixes into the frame in place of the rear wheel, being held in place by the bikes thru axle, keeping the chain tensioned & held away from the frame. The chain sits in a roller, which allows the cranks to be rotated, making this ideal to be used when cleaning the chain & derailleur. It can also be adjusted to fit dropout spacings from 135mm to 150mm, meaning that the rear of the frame cannot be compressed or damaged during transport ...

Used for the installation of a fork crown race, the lowest part of a headset. Ensures the race is correctly fitted & set, without causing damage to either the forks or the crown race & bearing surface. Simply select the correct size adaptor so that it sits on the outside shoulder of the crown race, slide the setting tool onto the fork steerer & tap the end cap firmly with a dead blow hammer until the race has been seated. ...

Used for the installation of a fork crown race, the lowest part of a headset. Ensures the race is correctly fitted & set, without causing damage to either the forks or the crown race & bearing surface. Simply select the correct size adaptor so that it sits on the outside shoulder of the crown race, slide the setting tool onto the fork steerer, & tap the end cap firmly with a dead blow hammer until the race has been seated ...

Ideal for both road & mountain bikers, this tyre & repair kit is compact enough for road & trail side repairs & are strong enough for workshop use. The levers feature a wide & rounded profile, making them comfortable to hold, & giving them the strength needed for both tubeless & tight fitting tyres. They clip together making them easy to store & carry, & feature a spoke hook at the other end so that they hold themselves in place when more than one of them is required. It also comes with a patch kit containing 6 self-adhesive patches, sand paper (to roughen up the surface of the tube), that are supplied in a plastic box which slots into the tyre levers. ...

This impact quality 1/2"D universal joint features a special design that allows strong, smooth torque at every angle. The narrow profile combined with the 40 degrees working angle & 360 degrees rotation ensures that this swivel socket adaptor is ideal to be used on fixings that have very limited access in engine bays & confined spaces. ...

For use when fitting, shortening or tidying up gear & brake cables. These cutters feature hardened triangular jaws to give a clean & precise cut, to help prevent the cable fraying, allowing the end of the cable to be threaded through the outer housing or pinch bolt. ideal to be used by both the home or shop mechanic ...

This freewheel remover fits 5 to 10 speed Shimano freewheels, allowing for their quick & easy removal so that wheel bearings & axles can be accessed ...

Set of 3 compact aluminium tyre levers, for road side repairs as well as general workshop use. The narrow profile makes them easy to slide in & hook underneath the tyre. The spoke hook end allows the levers to hold themselves in place when more than one is required. The slim size & lightweight of these aluminium tyre levers means that they will easily fit into any saddle bag, back pack, or pocket, & are ideal for packing together with a spare tube, multi-tool & pump, as part of an on-bike tool kit. ...

Required for tightening or loosening spoke nipples, a spoke wrench allows for the tension in the wheel spokes to be adjusted so that the wheel runs straight & true. This wrench fits 8 different sized spoke nipples & is ideal for both the keen home or shop bike mechanic ...

This slim ratchet screwdriver features a magnetic bit holder that fits both 1/4” & 4mm bits, an aluminium body with knurled non-slip surface for grip, & a swivel head cap. It comes supplied with 11 assorted bits & is ideal for repairing glasses, watches, cameras & other electrical devices. ...