The tool works as fast as you do with consistent nail penetration. The sequential operating mode allows for precision placement & the bump operating mode provides the user with production speed. Depths can be easily referenced utilizing numbered dial & user does not sacrifice performance when changing depths. Headlights provide increased visibility in low-light conditions or confined areas without any light. ...

Powerful 18 Volt combination tool for hammer drilling & screw driving applications. Compact, lightweight design. 17 position adjustable torque control for consistent screw driving into a variety of materials with different screw sizes. Two speed settings, variable speed & reverse switch for controllable use. Ergonomically designed trigger & rubber grip. 13 mm single sleeve key less chuck with automatic spindle lock for quick & easy bit change with one h&. Electronic motor brake for added control. High performance fan cooled motor for maximum power & durability. All metal gearing for efficient power transmission & longer tool life. LED light for enhanced visibility.* Bare Unit = No Battery or Charger supplied ...

Durable frame less high speed motor delivers up to 150 Nm of torque. All metal gearing for efficient power transmission & long tool life. Aluminum front housing provides greater heat dispersion increasing motor life. enhanced variable speed switch & electronic motor brake for complete control for both setting & removing fasteners. 6.35 mm key less hex-drive allows for quick & easy bit changes. Compact body enables use in tight spaces. Rubber coated grip & rear of the tool to reduce surface vibration & user fatigue. LED light to improve visibility of fastener. Available belt clip accessory allows the user to hang the tool on belt when not in use. * Bare Unit only. Use with your existing batteries & charger. ...

The De Walt DCB102 XR Dual Port USB (Universal Serial Bus) Lithium-Ion Battery Charging Station is an excellent & simple solution to your charging requirements. This dual port charging station is capable of simultaneously charging 2 XR Li-Ion DEWALT 10.8V, 14.4V, 18V Slide Pack batteries & is handily equipped with 2 USB (Universal Serial Bus) charging points for maximum charging versatility. The unit is capable of charging a 1.5 Ah battery pack in 30 minutes & utilises the ‘ De Walt 2 stage charging system. There are battery diagnostics with a bright LED indicator that tells you the status of the charging battery. The diagnostics include: charged, charging & power problem, as well as telling you if you are attempting a charge in conditions that are too hot or cold, further protecting a batteries quality & lifetime. ** Please Note: This charging station does not include batteries. ...

This 10.8V 1.5 Ah Lithium Ion battery from De Walt is compatible with all De Walt 10.8V XR power tools, so it is very versatile. Providing optimum power & boasting an impressive extended running time, this 1.5 Ah battery suffers no memory effects & virtually no discharging when not in use, so it is always ready to provide you with the power you need, when you need it. ...

The De Walt DCD790M2 is an 18V XR Li-Ion compact drill driver that comes complete with 2 x 4.0 Ah XR Li-Ion battery packs. It features brushless motor technology for supreme efficiency & reliability while remaining ultra compact, lightweight & ideal to be used in confined spaces. There is a two speed all metal gearing transmission for maximum runtime & a long tool life. Torque control is offered in the form of 15 positions for consistent screw driving into a variety of materials. The intelligent trigger design allows for total control of the tool & thus the job at h&, while the enhanced ergonomic design with rubber grip means increased comfort. There is a foot LED with a delay feature for enhanced visibility on the job, which also doubles as a flashlight & the Li-Ion battery packs allow for superior insertion & removal, they also come with a state of charge indicator. A steel belt hook & magnetic bit holder ensure the tool is always close at h&. A multi voltage charger for use with 18V, 14.4V & 10.8V XR Li-Ion battery packs is included, along with 2 x 4.0 Ah XR Li-Ion battery packs, belt hook, magnetic bit holder & a heavy duty kit box. ...

The De Walt DCJ069L Heated Jacket is especially designed to provide hours of warmth to the core of your body utilising De Walt XR batteries (not included). The jacket itself is created from a durable outer shell that is resistant to water, rain & wind. 3 core zones are heated during wearing, these include: the upper left chest, right chest & mid back, evenly spreading the heat to the most important parts of your body. There are 3 temperature settings to chose from
- low, medium or high. There is also a convenient pre-heat function so you can be warm as soon as the jacket is put on. The XR battery adapter features a battery charge indicator so you know when you are about to run dry. Also present are 2 handy USB (Universal Serial Bus) power ports for charging portable electronic devices, so you can achieve more on the go. The battery storage pouch expands to fit the De Walt 4.0 Ah & 5.0 Ah battery packs. This jacket runs on 10.8/14.4/18V batteries. * Bare Unit only. Use with your existing batteries & charger.
...

Compact, lightweight design with impact resistant housing. Flashlight head can rotate 180 degrees horizontally. Flashlight head also rotates 180 degrees vertically with ratchet lock. Flashlight has belt clip, magnetic mount or can be free standing. * Bare Unit only. Use with your existing batteries & charger. ...

The De Walt DCN692N-XJ Nailer features Bushless Motor Technology which helps to allows maximum run times, whilst the sequential operating mode allows accurate placing & a bump mode provides superb production speeds. DCN692N-XJ Nailer provides a quick firing sequence, less recoil & durability when firing short nails. This De Walt Nailer has a fault indicator light communicates immediately why the nailer has failed to fire, low battery levels or nail jamming. The 18V De Walt Nailer uses a mechanical action which helps to reduced cleaning & service requirements. With a versatile 30 to 34 degree magazine angle DCN692N Nailers accept most clipped head & off centre round head paper tape collated framing nails * Bare Unit only. Use with your existing batteries & charger. ...

The De Walt DCR017 DAB Radio is the perfect companion for long days on site. Not only is it a DAB+ & FM tuner that receives both digital & analogue signals but also a multi-voltage XR charger with an LED charge indicator. This site radio can be powered by a 100V AC power connection for versatility on site & can also be powered by 10.8V, 14.4V & 18V XR Li-Ion batteries for added versatility. Not only does the radio receive radio signals but it also features a 3.5mm auxiliary port that allows for your favourite audio device to be connected. The radio is surrounded by a 6 point blow moulded roll cage to protect it from impacts & knocks & there is a two metre power cord with a wrap-around storage facility. The speakers are twin sets of woofers & tweeters with ported bass for high fidelity audio. * Bare Unit only. Use with your existing batteries & charger. ...