This waterproof & reflective Breakdown Warning Sign gives maximum visibility in emergency situations & is magnetic for fixing to vehicles etc. Eyelets are also included for other situations & environments. LED directional lights have three programed patterns. Ideal for broken down cars, wheel changes or for emergency recover or breakdown services. ...

This product will take images & video clips from within the confines of the engine etc & download them to your laptop. Investigate easily the cause of the problem with this simple sighted probe with light. It is packed in an aluminium case with software & instruction manual on CD. Ideal for automotive, construction, industrial, plumbers electricians, inspectors, aircraft & many more. Capture straight line footage or stills of action within confined spaces. Ideal for identifying problems within the cylinder head such as piston pick up, where the engine has been run on low oil or lack of lubrication & the pistons have become scored or marked. A dropped valve can also be identified by viewing through the relevant spark plug port. Each valve can be looked at independently. If valves are deep seated the Video Scope can be used through the inlet or exhaust manifold port. This tool is also ideal for other tradesmen including plumbers, electricians, plant maintenance, construction engineers etc. The VIGS can be used single handed by using the controls on the unit or with one person operating the camera & the other watching the investigation & directing from the screen. ...

Brake Caliper piston rewind tool with two adaptors. Applications
- Astra-G (98-03), Astra-H (04-09), Corsa C (01-06), Corsa
...

The extending handle in the closed position allows the tool to be used in confined spaces or if more leverage is required. ...

Timing Tool Set for VAG 2.0 Litre TDI PD DOHC engines fitted to Audi A4, A6, Skoda Octavia II, Volkswagen Golf, Golf Plus, Jetta & Touran models. ...

A four piece toothed Injector Socket Set for use on Commercial Vehicles. 1/2"D x 72mm x 4 tooth, Hex 32mm x 70mm x 4 tooth (with Spline M14 x 1.5 receiver thread), 1/2"D x 120mm x 3 tooth, Hex 32mm x 120mm x 4 tooth for Mercedes, Neoplan, Setra & MAN. Also suitable for some Iveco, Scania & Renault. ...

This five piece set is essential for replacing the Cam belt on Ford Focus/ Cmax 1.6 Ti-VCT with engine code HXDA (2003-2007) plus 2.0 TDCi with engine codes G6DA, G6DB, G6DC 2003-2007. Set

Includes:: Camshaft Sprocket Holding Tool (OEM 303-1097), Tensioner Pulley Locking Pin (OEM 303-1054), Flywheel Timing Pin (OEM 303-1059), Crankshaft timing pin (OEM 303-748), Camshaft Sprocket Locking Tool (OEM 303-735). Also required Flywheel Locking Tool & adaptors (OEM 303-393/303-393-02) Laser Part No 4275.

...

Camshaft alignment pin (KM 6340) & tensioner locking pin (KM 6333) for Vauxhall/ Opel, Astra-G, Astra-H, Meriva (VXR), Zafira-B 1.6 16v with engines Z16LET, Z16XEP 2003-2007. ...

Exhaust camshaft alignment tool (11 9 291/3), Inlet camshaft alignment tool (11 9 292), flywheel timing pin (11 5 120), sensor gear alignment tool (11 9 350), timing chain pre-tensioning tool (11.9.340), thumbscrew M8 x 1.25 x 20 (11 9 293), for 118i/120i (E87), 318i/320i (E90) & Z4 2.0 (E85) also 316i/316ti Compact (E46) & 318i/318ti Compact (E46) with flywheel timing pin (11 9 190) with N42 & N46 engines. ...

This comprehensive kit has E sockets for Torx fastenings & a high quality, patented Quick Chuck for use with the nine Silicon Steel bits. A 1/4" drive socket adaptor completes the set. Star Bits include: T10, T15, T20, T25, T27, T30x 2, T40x 2 whilst the 6 colour coded E sockets allowing easy selection are E4, E5, E6, E7, E8, E10. The spring loaded, pop up case has belt clip for easy selection. ...