The Makita DDF456RFE 13mm Drill Driver 18V LXT has a 22 minute charge time with the air cooled Makstar Optimum Charging System. Fully compatible with 18V 4.0 Ah Battery with 36 minute charge time. Lithium-ion batteries have greater life spans than their Ni-MH or Ni-Cad counterparts giving 430% greater run time. Lithium-ions 40% weight saving means 18 volt power can be obtained by a battery that weighs the same as a 12 volt Ni-MH battery. This drill/driver has a 4 pole motor with a 2 speed gearbox, featuring all metal gears. There are high comfort grips for maximum usability & a well placed push button for forward & reverse functionality. There is a keyless chuck & an LED job light with an afterglow function to illuminate the work area. ...

The Makita DDF456Z 13mm Drill Driver 18V is highly powered yet lightweight. It has a 4 pole motor & has high comfort grips for comfort on long jobs. There is a conveniently located push button to access the forward & reverse functionality as well as an LED job light with an afterglow function to illuminate the work area. It has a two speed gear box with all metal gears & a keyless 13mm chuck system. * Bare Unit only. Use with your existing batteries & charger. ...

The Makita DFR550Z 18V Auto Feed LXT Screwdriver has been developed as the advanced model of the BFR440, featuring higher durability. This model features a more reliable casing attachment. It also features an anti-tilt device to prevent screws from swaying as well as dust proof construction for reliability on the job. There is a foldable screw guide that keeps the screw strip tangle free as well as a silent clutch. * Bare Unit only. Use with your existing batteries & charger. ...

The Makita DFR750RFE accepts screws up to 75mm long & features an anti-tilt device to ensure the screws are applied straight & true. Its powerful LXT motor produces a no load speed of 4000rpm, while its reliable Li-Ion batteries mean it can be used time & time again with ease. Also featuring the forward & reverse rotation, foldable screw guide & auto feed facility. ...

The Makita DGA452RFE LXT 115mm 18V Angle Grinder has been developed as the first Angle grinder of the MAKSTAR series models. It will charge in just 22 minutes with the air cooled Makstar Optimum Charging System & the Lithium-ion batteries have greater life spans than their Ni-MH or Ni-Cad counterparts, giving 430% greater run time. Lithium-ions 40% weight saving means 18 volt power can be obtained by a battery that weighs the same as a 12 volt Ni-MH battery. It features a 4 pole motor & an anti-restart function with accompanying warning lamp. It is capable of using wheels or discs for mains grinders & has an easy grip body along with high comfort grips. Added user safety is provided by an electronic current limiter with an integrated warning lamp. It comes complete with an 18V Li-ion battery & replacement wrench. Battery Type Lithium-ion Charging Time
- 22min Battery Quantity
- (3.0 Ah)2 Voltage
- 18 V Noise sound pressure
- 73d B (A) Noise K factor
- 3d B (A) Max Wheel Diameter
- 115mm No Load Speed
- 10000rpm Vibration K factor
- 1.5 m/sec&sup 2; Vibration Artificial Wheel
- 8.5 m/sec&sup 2; Net weight
- 2.3kg









...

The DGA900Z angle grinder from Makita is driven by two 18V batteries to give you extra power for those more demanding jobs. Brushless motor Electronic current limiter for overload protection. Soft start Anti-restart function. Electric brake Active Feedback Sensing Technology (AFT): Shuts down the tool to protect the user if the rotation speed suddenly slows down Automatic Torque Drive Technology: Automatically changes the cutting speed according to load condition for an optimum operation Ergonomically designed handle with soft grip. Battery guard Large switch lever with lock off function Battery indicators for over-discharge & overheating protection ...

The Makita DHP453RFE LXT Combi Drill has a single sleeve keyless drill chuck for easy bit changes & removals. This drill has been designed with user comfort in mind
- it is compact, lightweight & easy to use. It has a conveniently located push button for selection of forward & reverse functionalities as well as high comfort grips. There is a 2 speed gear box with all metal gears. 22 minute charge time with the air cooled Makstar Optimum Charging System. Lithium-ion batteries have greater life spans than their Ni-MH or Ni-Cad counterparts giving 430% greater run time. Lithium-ions 40% weight saving means 18 volt power can be obtained by a battery that weighs the same as a 12 volt Ni-MH battery.
...

The Makita DHR202RFE 20mm Rotary Hammer has been especially designed to tackle drilling tasks in a variety of materials with ease, including: wood, steel & masonry, all while free from cumbersome cabling. This hammer is designed with user comfort in mind, with high comfort grips & an easily locatable push button for forward & reverse functionality. There is an LED job light feature that has an afterglow function to illuminate the work area & bit changes are simple & quick thanks to the one-touch sliding chuck. There are 3 separate operational modes: rotary only, hammer only & rotary hammer function. The chisel can rotate a full 360 degrees with 40 separate locking positions for job versatility. 22 minute charge time with the air cooled Makstar Optimum Charging System. Lithium-ions 40% weight saving means 18 Volt power can be obtained by a battery that weighs the same as a 12 Volt Ni-MH battery. Lithium-ion batteries have greater life spans than their Ni-MH or Ni-Cad counterparts giving 430% greater run time. ...

This 81cc, 4.5 horsepower 16” Disc Cutter by Makita is a heavy duty, powerful tool, ideal for any cutting jobs. With a maximum wheel speed of 3800rpm, cutting depth of 145mm & two position cutting positions (central & lateral), this tool has all the attributes you need. Usability & practicality is key with this cutter, boasting blade cover hand grip, dust suppression system, quick & simple wheel guard adjustment & vibration dampening. You will find this tool as easy to use as it does to cut. ...

The DPT351RFE Pin Nailer features a unique nail driving mechanism, meaning you can shoot 18, 25, 30 & 35mm pin nails without the need for an air hose or air compressor, massively cutting down on the equipment needed to complete a job. The DPT351Z has high comfort grips so testing jobs in hard to reach areas will feel less painful & tiring. A double safety trigger ensures you are protected from misfires or accidental discharge on the job. There is easy depth adjustment which means you can work material & job specifically with ease & there is an LED job light to illuminate dark work areas. ...