This Makita Dust extraction & vacuum system. Developed for use in the building maintenance industry, it boasts a large 8L tank for exceptional cleaning & extended working potential. Supplied with this item: 2x BL4025 XGT 2.5 Ah 40V Batteries DC40RB Two-port Charger 230V ADP10 XGT TO LXT Charger Adaptor Dust nozzle assembly Telescopic pipe Bent pipe 1.7m x 32mm hose Poly bag set Multi-hook Stopper Long sash nozzle ...

20 L Dust Class L vacuum Approved for Dust Class L in accordance with the EU standard Push & Clean semi-automatic filter cleaning system for extended operating time & filter life Convenient integrated carry handle for easier transportation Designed for domestic & commercial vacuum cleaning (not connection to power tools for dust extraction Double Insulation Max Airflow:3.6m&sup 3;/min Dust Bag Capacity :16 litres Max Sealed Suction :21.0k Pa Tank Capacity :20 litres Tank capacity Wet :13 litres Noise sound pressure :72d B (A) Hose length :3.5m Hose Diameter :32mm Input Wattage :1000w Net weight :7.5kg ...

20L Dust Class L vacuum Approved for Dust Class L in accordance with the EU standard Push & Clean semi-automatic filter cleaning system for extended operating time & filter life Convenient integrated carry handle for easier transportation Designed for domestic & commercial vacuum cleaning (not connection to power tools for dust extraction Double Insulation Max Airflow:3.6m&sup 3;/min Dust Bag Capacity :16 litres Max Sealed Suction :21.0k Pa Tank Capacity :20 litres Tank capacity Wet :13 litres Noise sound pressure :72d B (A) Hose length :3.5m Hose Diameter :32mm Input Wattage :1000w Net weight :7.5kg ...

The Makita VC3011L is a class L wet & dry dust extractor that removes 99.0% of dust & is suitable for extractions involving mica, china clay & gypsum. The motor head has a flat top design with a handy tool deposit area & an innovative hose storage solution with a flexible rubber strap. There is a washable PET cartridge filter that protects the turbine by holding back fine dust & debris. The fleece filter bag means you can pick up most particles without damaging the filter bag & it takes just seconds to clean thanks to the ‘push & clean system. There is an automatic on/off function that means the machine will activate when a connected power tool is used & the integrated carry handle makes lifting & tilting the unit easy & convenient. Protection level IP24 240V model

Includes:: power take off (2000W) Max Airflow
- 3.6 m&sup 3;/min Dust Bag Capacity
- 28 litres Max Sealed Suction
- 21.0 k Pa Tank Capacity
- 30 litres Tank capacity Wet – 23 litres Noise sound pressure
- 72 d B (A) Hose length
- 3.5m Hose Diameter
- 32mm Input Wattage – 3000W Net weight
- 11kg









...

The Makita VC3011L is a class L wet & dry dust extractor which removes 99.0% of dust & is suitable for extractions involving mica, china clay & gypsum. The motor head has a flat top design with a handy tool deposit area & an innovative hose storage solution with a flexible rubber strap. There is a washable PET cartridge filter which protects the turbine by holding back fine dust & debris. The fleece filter bag means you can pick up most particles without damaging the filter bag & it takes just seconds to clean thanks to the ‘push & clean system'. ...

34 L Dust Class M vacuum (Wet & Dry) Wet & Dry M-Class Dust Extractor with power take-off Class M
- Removes 99.9% of dust with
...

34 L Dust Class M vacuum (Wet & Dry) Approved for Dust Classes M in accordance with the EU standard. Automatic filter cleaning system. Durable PTFE filter with high filtration efficiency. Washable non-stick membrane Flat top design for deposit of hand tools & accessories. x Hatchback with big opening for easy access to filter Individual settings for different hose diameters (21, 27, 32, 36 & 38mm) Speed regulation Air flow sensor beeps when air flow is reduced by clogged filter, full tank etc. Automatic On/ Off function: machine activates when a connected power tool is used. Integrated hose, cable & accessory storage Double-wall container with big wheels & steel castors. Makpac cases can be attached to the unit with optional adapter plate 32A Plug ...

305 mm (12") 1, 800 W Slide Compound Miter Saw, Laser Motor head slides on fixed pipes without extending machine at rear end, so the machine can be placed close to wall. Front knob for easy bevel adjustment Holders to support a wide workpiece Easy-to-operate mitre angle lock One-touch sliding lock Large turn base Connects to dust extractor Electric brake Soft start Constant speed control Double Insulation Built in laser guide. Max mitre range: 60
- 60° Max mitre cut at 90 degrees: 92 x 382mm
...

The 191U48-0 Power Source Kit consists of 4 x BL4050F 40V Max XGT Li-ion 5.0 Ah batteries & a DC40RB/2 240V twin port fast charger, supplied in a Makpac case. The MKP 5.0 Ah Power Source Kit is specially designed for use with 40V Max & 18V LXT products being used in continuous operation. The BL4050F is a 40V Max Li-ion XGT 5.0 Ah Battery, a new type of cell with increased water & drop impact resistance. Communication between the battery & charger, allows to read more detailed information on the battery usage history. The BL4050F communicates digitally between the battery & the tool & battery & the charger & is equipped with 4 LED battery fuel gauge with a check button & cooling system for maximum battery life. The average charging time for a BL4050F is Approx. 50 minutes. The DC40RB is a 240V Twin Port Fast Charger, designed for charging battery ranges from 14.4V LXT to 40V Max XGT; ADP10 Interchangeable Adapter Set is required (sold separately) to charge 14.4V & 18V LXT batteries. The DC40RB is not compatible with G-Series range of batteries. The DC40RB is able to charge two Makita 40V Max Li-ion XGT batteries at the same time as fast as a DC40RA charger charges one battery. The DC40RB performs consecutive fast charges of batteries for increased convenience & features optimum charging control using feedback of real-time battery data. DC40RB is equipped with large charging status indicator light, selectable melody sound for full charge notification, two cooling fans; one for the battery & the other for the charging circuit & electronic current limiter for overload protection. The DC40RB is capable of fully charging a BL4050F 40V Max 5.0 Ah battery in Approx. 50 minutes, BL4040 40V Max 4.0 Ah battery in Approx. 45 minutes & BL4025 40V Max 2.5 Ah battery in Approx. 28 minutes. ...

The 191V42-8 Power Source Kit consists of 2 x BL4050 40V Max XGT Li-ion 5.0 Ah batteries & a DC40RA/2 240V fast charger, supplied in a Makpac case. The MKP 5.0 Ah Power Source Kit is specially designed for use with 40V Max & 18V LXT products being used in continuous operation. The BL4050F is a 40V Max Li-ion XGT 5.0 Ah Battery, a new type of cell with increased water & drop impact resistance. Communication between the battery & charger, allows to read more detailed information on the battery usage history. The BL4050F communicates digitally between the battery & the tool & battery & the charger & is equipped with 4 LED battery fuel gauge with a check button & cooling system for maximum battery life. The average charging time for a BL4050F is Approx. 50 minutes. The 240V DC40RA 40V Max Fast Charger is designed for charging 40V Max Li-ion XGT batteries, equipped with raised & enlarged charging indicator status light for a more visible indication, selectable melody sound for notification of fully charged battery & has two cooling fans, one for the battery & one for the charging circuit. The DC40RA is capable of performing consecutive fast charges of batteries & is compatible with the Makita Interchangeable Adapter ADP10 (available separately) for charging Makita Li-ion LXT slide type batteries. DC40RA is wall mountable. The charging time for a BL4020 40V 2.0 Ah battery is Approx. 22 minutes, BL4025 40V 2.5 Ah battery is Approx. 28 minutes & a BL4040 40V 4.0 Ah battery is Approx. 45 minutes. ...