MOT Approved tool, which simplifies vehicle testing by allowing any test that requires the brakes to be applied to be carried out by one person rather than two. ...

One-man pressure brake & clutch bleeding system suitable for the professional workshop. Low pressure tank (20-40psi) can be pre-charged with compressed air, making the unit fully portable. Large reservoir means reduced risk of running the system dry during bleeding process or complete fluid change. Suitable for use on ABS systems. Features a long delivery hose for operation with a low level ramp, & long reach handle for easy mobility. Supplied with a range of European, Japanese & US vehicle adaptors. ...

A one man pressure break & clutch bleeding system suitable for the professional workshop. The low pressure tank (20
- 40psi) can
...

Powered by the vehicle’s own 12V battery. Allows single-handed bleeding of the vehicle’s brake or clutch system & unit is fitted with a long, high pressure hose. Bleed pressure is closely controlled up to 2.5bar
- suitable for most vehicles (even those with ABS). Unit fitted with auto-shut-off device to prevent the system running dry & is supplied with a variety of European, Japanese & US vehicle adaptors, bleed bottle & fluid extractor.
...

Specially designed for the removal of corrosion from brake & fuel pipes for fast & thorough inspection. Features 12 cleaning edges for different sizes & types of pipes.

Includes:: curved cleaning edges for hard-to-reach areas. MOT Compliant tool.

...

Permits the removal of the top suspension nut by holding the strut piston, so it doesn’t rotate while turning the nut. The go-through design of the socket & ratchet allows the extension to pass through the middle. To be used in conjunction with a 1/2" Sq drive ratchet or T-bar (not included). ...

Sockets manufactured from Chrome Vanadium steel. Permits the removal of the top suspension nut by holding the strut piston, so it doesn’t rotate while turning the nut. The go-through design of the socket & ratchet allows the extension to pass through the middle. To be used in conjunction with a 1/2" Sq Drive ratchet or T-bar (not included). ...

Die-cast tools suitable for press-type quick disconnection joints found on Chrysler, Ford & Vauxhall/ Opel vehicles. Swivel action allows quick selection of correct sized tool. ...

The Sealey brake caliper repair kit saves your valuable time when replacing damaged brake caliper threads with a new threaded insert &

Includes:: three alignment plates to ensure the correct alignment of the insert. This kit

Includes:: a 7mm hex key, stepped drill M9 tap & ten inserts in a handy carry case.



...

A comprehensive automotive fuel line & air conditioning hose disconnection kit. suitable for a wide variety of vehicles. The kit is designed for radiators, transmissions, oil coolers & power steering lines. It is compatible with low profile fuel lines on a range of Ford & Vauxhall/ Opel models. Contents: Colour-Coded Fuel/ Air Conditioning Disconnecting Set; 5/16"/8mm, 3/8"/9.5mm, 3/8"/9.5mm Cooler Line, 3/8"/9.5mm Oil Cooler Line, 2 x 1/2"/13mm, 1/2" Oil, 5/8"/16mm, 3/4"/19mm & 7/8"/22mm, Fuel Line/ Air Conditioning Disconnect Set; 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8", Air Line Disconnect; 1/4"/6mm, 3/8"/9mm, 1/2"/12mm, 5/8"/16mm, Vauxhall/ Opel & Ford Low Profile Fuel Line Disconnect Tools; 5/16" & 3/8", Universal Connectors for Radiators, Transmission, Oil Cooler & Power Steering Lines ...