The Sherpa Petrol Multi Tool Kit thanks to the powerful & reliable engine unit, this system means that you can connect multiple attachments quickly & easily, allowing the user to switch between many gardening tasks. This Sherpa Multi-Tool kit means that you can easily switch between strimming grass with the trimmer attachment, cutting back heavier vegetation by using the brushcutter blade, through to cutting hedges of any height with the long reach hedgecutter & even prune trees with the chainsaw style pole pruner. ...

The Sherpa STS40-S is a versatile petrol scarifier perfect for keeping your lawn healthy & looking its best. This scarifier comes with two different cassettes to help take care of your lawn. The spring tine cassette is fitted with 24 heavy duty tines with angled tips ideal for powerfully raking the lawn; removing dead grass, thatch build up & moss from the lawn. The angled tips provide increase bite into the tuft for enhanced scarifying performance. The second cassette is fitted with 18 fixed solid steel blades designed to cut deeper into the turf layer, both removing thatch & helping to aerate. This boosts airflow & drainage to give a healthier lawn. The powerful 212cc OHV engine delivers drive to the blades / tines & is straightforward to start. Refilling the large 3.6 litre fuel tank is mess free with its top mounted position & large fill opening. Adjusting the working depth couldn’t be simpler. Turn the deck mounted dial to adjust the working height. Use the lever by the handle to lower the machine to your chosen scarifying depth quickly & simply. Once you’re done you can quickly switch back to the transport position allowing you to easily move the machine around without damaging any lawn or paths. The handle is padded for comfortable use over longer periods & it is fitted with an ergonomic light touch operator presence control bar (OPC). Find the right working height for you with adjustable handle height on the STS40-S. The handles on the STS40-S fold down, taking up less space when stored. The front grab handle allows it to be lifted; ideal if you have a few steps to your lawn or need to get it into a vehicle. ...

The Sherpa STWV58L is a wheeled leaf collector comes complete with a multipurpose collection bag & is made from heavy duty fabric with a solid base & rear facing zipped opening flap for easy emptying. It also has two side opening exhaust vents which allow for increased air flow through the bag if needed. Inside this machine is a four-blade steel impeller that can give an impressive 12:1 Mulching Ratio
- this metal blade will really reduce the debris collected into manageable volumes. The Sherpa Petrol Wheeled Leaf Vacuum is completed with a 159cc Loncin petrol engine for reliability & easy maintenance, & a rubberised foam grip handle grip for extra comfort.
...

The Sherpa STWV58L is a wheeled leaf collector comes complete with a multipurpose collection bag & is made from heavy duty fabric with a solid base & rear facing zipped opening flap for easy emptying. It also has two side opening exhaust vents which allow for increased air flow through the bag if needed. Inside this machine is a four-blade steel impeller that can give an impressive 12:1 Mulching Ratio
- this metal blade will really reduce the debris collected into manageable volumes. The Sherpa Petrol Wheeled Leaf Vacuum is completed with a 159cc Loncin petrol engine for reliability & easy maintenance, & a rubberised foam grip handle grip for extra comfort. This unit also

Includes:: a hose kit which can be connected to both front & rear hose ports on the STWB58L, to work as a vacuum or blower hose.


...

The 16 Litre Sherpa SXMD16E Cordless Knapsack Multi-Sprayer is lightweight & versatile. It offers the convenience of a go anywhere rechargeable carry sprayer without any need to pump the machine. All you have to do is fill the tank & switch it on. The SXMD16E comes with a detachable wheeled trailer with a telescopic back. It is extremely well balanced & easy to transport. The shoulder harness is strong, rugged & padded. The ergonomic tank design matches the contours of the human body to make it ultra comfortable to wear. In order to reduce fatigue from long days spent spraying, the trigger features a locking function to make it effortless & easy. You can use the control knob to adjust the pump pressure to be tailored to the task at hand & you can switch between one of the four included nozzles that provide different spraying patterns. Rechargeable The Sherpa Sprayer has a built-in rechargeable battery & is supplied with an automatic battery charger. The sprayer has an on board volt meter to display how much power is left in the machine & features an audible low battery warning alarm. Inlet Strainer To help prevent foreign matter entering the tank, a removable strainer is included in the neck to capture any solid materials. This helps keep the sprayer working at its optimum & prolongs the working life of the pump. Lockable Trigger To reduce fatigue from holding the trigger over longer periods of time, the trigger can be engaged to hold the trigger open & keep the sprayer operational until deactivated. Pressure Control Adjust the spraying pressure easily with the variable control knob as desired making it ideal for spraying in different environments. ...

This extremely sturdy British Workshop from Shire is traditionally manufactured from high grade FSC Certified timber. The ledged & braced double doors are standard & can be fitted in any panel. The 3" x 2" framing & fully braced panels make the Mammoth one of the strongest Workshops available. The roof & walls are constructed using 12mm shiplap with a heavy duty 16mm tongue & groove floor with 3" x 2" floor joists. Felt, fixing kit & instructions are all supplied Width
- 3156mm Depth
- 4524mm External Eaves Height
- 2096mm External Ridge Height
- 2709mm Door Width
- 1424mm Door Height
- 1805mm Window
- 2 no Opening Wall Panel Material
- Shiplap T & GFraming
- 44 x 70mm Roof Material
- Tongue & Groove Floor Material
- Tongue & Groove










...

Both roof & floor of the Shire Workshop are of tongued & grooved pine & the floor has close spaced bearers for added support. Framing is a robust 44mm x 44mm & the windows are storm resistant, joinery quality frames glazed with 3mm glass. All of the timber is sourced only from very slow grown, high grade, FSC, European pine. The building is provided with a basecoat treatment ready for painting in the colour of your choice.** PLEASE NOTE
- The contents shown in the example image are for display purposes only & are not included with the product. Width
- 2980mm Depth
- 4470mm External Eaves Height
- 1879mm External Ridge Height
- 2289mm Door Width
- 1550mm Door Height
- 1710mm Window
- 2no Opening Wall Panel Material
- Shiplap T & GFraming
- 44 x 44mm Roof Material
- Tongue & Groove Floor Material
- Tongue & Groove











...

This extremely sturdy British Workshop from Shire is traditionally manufactured from high grade FSC Certified timber. The ledged & braced double doors are standard & can be fitted in any panel. The 3" x 2" framing & fully braced panels make the Mammoth one of the strongest Workshops available. The roof & walls are constructed using 12mm shiplap with a heavy duty 16mm tongue & groove floor with 3" x 2" floor joists. Felt, fixing kit & instructions are all supplied. Width
- 3156mm Depth
- 7540mm External Eaves Height
- 2096mm External Ridge Height
- 2709mm Door Width
- 1424mm Door Height
- 1805mm Window
- 2 no Opening Wall Panel Material
- Shiplap T & GFraming
- 44 x 70mm Roof Material
- Tongue & Groove Floor Material
- Tongue & Groove










...

The 10 x 6 Double door overlap apex shed is an attractive feature in any garden. Windows down one side provide plenty of light. The double doors & generous eaves height make for very easy access to the entire space. It is manufactured from high grade, slow grown FSC European pine cladding boards over 34mm square framing. The doors are fitted with a hasp & staple catch, whilst the roof & floor are constructed from solid sheet OSB. The building is drip treated with a basecoat ready for top coating by the customer immediately on installation. Windows can be fitted on either side. ...

The Adjustable Shed Base is specially designed to provide a quick & easy base for your shed. Simply assemble the bearers in the kit as directed & attach each of the adjustable legs. Provided the ground is not more than 100m out of level the difference can be adjusted by moving the sliding discs on the legs & then locking them into place as the base is progressively hammered into the ground. No digging & no concrete to mix. This product is designed specifically for use with any of our appropriately sized buildings, it is not guaranteed to work with buildings from any other manufacturer. ...