Heavy duty fabric tool holder with a selection of assorted Craft Pro tools. Magnetic Quick Chuck which is fitted into a standard 3/8-inch key or keyless chuck & allows any direct drive 1/4-inch hex bits to then 'snap' in effortlessly. Flat bits 16mm, 19mm, 22mm, 25mm & 30mm diameter. Auger bits 10mm & 13mm diameter. Hex drill bits 1mm, 2mm 3mm, 4mm, 5mm, 6mm & 7mm diameter. Drill bit guides 2mm & 2.75mm for hinges. Drill countersinks with 2.5mm, 3.25mm & 3.5mm drill bits. Twenty-three 25mm insert bits Pozi, Phillips, slotted, Torx & hex. Three Pozi 50mm screwdriver bits. Magnetic bit holder with retractable barrel. Magnetic nut drivers for 6mm, 8mm, 10mm & 12mm A/F bolts. Square drive adapters 1/4-inch, 3/8-inch & 1/2-inch A/F. Tungsten Carbide Tipped masonry drills 5mm, 6mm, 7mm & 8mm diameter. Deburr countersink & hole enlarger tools. Set supplied in tool holder with elasticated pockets to hold quick change shank & belt strap & are hook & loop fastening. ...

Quick release 14; inch hex shank for use in quick tool change drills. Five pack. Tool Steel (WS) body with High Speed Steel (HSS) drlll bit for longer life. Countersink ensures screw head is sub-flush & neat. For use in quick chuck drill tools. Can be used to counterbore deeper holes for plugs. For timber, fibre-board & chipboard. Case hardened body for longer life. Adjustable drill bit to suit material thickness. Use in quick chucks & impact drivers. ...

Quick release 14;" hex shank for use in quick tool change drills. Accurate self centred pilot hole drilling for hinges & lock face plates. Use on timbers & boards. High Speed Steel (HSS) drlll bit for longer life. Sprung loaded to ensure drill bit retracts safely. Easily dismantled for cleaning & drill bit replacement. Use in quick chucks & impact drivers. ...

The Combination Router Base is a retro fit, quick change, multi-functional router base designed to: Increase the overall versatility of the router. Improve the quality of finish of every routing pass. Reduce the possibility of error. Increase stability during routing. Increase the level of precision achieved. Save set up time between tasks. Save space on storing hand made jigs. The CRB has seven functions
- an offset baseplate, router compass from 19mm to 224mm radius, adjustable trenching with a clamp guide with 40mm micro adjustment, adjustable anti-tilt support, adjustable mortising of timber from 50mm to 200mm width, adjustable false panel groove copier & also enhances the Varijig frame system as an anti-tilt device when used with routers that can accept Euro style guide bushes (a special guide bush ref GB40/B is required). The CRB will fit most routers with two 8mm, 10mm & 12mm fence rod holes at centres of 78mm to 130mm. This product
Includes:: 1 x Plastic baseplate with handle 1 x Bridge 2 x Rods 8mm dia x 270mm 1 x Bridge shim pack (2x 2mm, 1x 2mm, 1x 1mm, 1x 0.5mm) 1 x Scale 1 x Pivot pin 1 x Pair of mortise pillars

...

This is an important safety attachment when profiling with bearing guided cutters. ...

The Craftsman Router Table has many features & comes complete with various accessories making this table perfect for craftsmen & woodworking enthusiasts. Featuring a large laminated working surface, parallel adjustment system, high back fence, sliding tenon push block for producing tenons & built-in safety on/off switch for safe operation & peace of mind. Accessories include: 2 x Insert rings, 1 x Mitre fence, 1 x Lead-on-pin, 1 x Safety guard 1 x Pushstick, 1 x side pressure, 1 x top pressure & 1 x no-volt release switch. ...

Heat treated tool steel countersink with a HSS drill. The adjustable design allows for different length screws & can produce a counterbored hole for woodplugs. The drill produces pilot holes only. ...

Heat treated tool steel countersink with a HSS drill. The adjustable design allows for different length screws & can produce a counterbored hole for woodplugs. The drill produces pilot holes only. ...

Heat treated tool steel countersink with a HSS drill. This tool can be used in abrasive materials such as laminated chipboard. The drill produces pilot holes only. ...

Sawblades designed for a professional finish in soft wood, hard wood, plasterboard, stone fibre board, particle board, veneer, plywood, MDF & hardboard. ...