United Kingdom
France
Germany
Netherlands
Sweden
USA
Italy
Spain
More From Contributor
JOYO JP-02 Power Supply Isolated Output For 9V 12V 18V Guitar Effect
Features:
Ten isolated output.
Isolated short circuit / overcurrent protection.
Powers for 9V, 12V or 18V effect.
Bright blue LED for Pedal Board lighting short circuit indicating.
Includes cables.
Part Name and Functions:
1. Switch for LED lights: Turn the switch towards those LED lights, normally all lights will go on after the power is connected. If you dont want all LED lights, please turn the switch back. The front panel of this unit has 10 high-brightness LED lights working as indicators, as well as lighting for pedal board.
2. DC 18V INPUT: Please plug in the output of power adapter here, and do not use adapter from elsewhere.
3. OUTPUT 1-7: All DC 9V power output with the maximum volume of 100mA; they are suitable for ordinary analog effectors. Under the circumstances of all
LED lights on, instantaneous overcurrent in certain output will lead to the corresponding LED lights flash and the current of this channel is limited to 100mA. That is to say, output 1-7 might not be able to work properly if the connected digital effectors are of larger power consumption, then you need to use output 8. 4. OUTPUT 8: Also DC 9V power output with maximum volume of 500mA, it is suitable for digital effectors and DC 9V low-power digital guitar amplifiers. When instantaneous overcurrent occurs in this channel, the corresponding LED light will flash and the current is limited to 500mA. 5. DC12V OUTPUT: The maximum output current is 100mA. When instantaneous overcurrent occurs in this channel, the corresponding LED light will flash and the current is limited to 100mA. 6.
DC18V OUTPUT: The maximum output current is 100mA. When instantaneous overcurrent occurs in this channel, the corresponding LED light will flash and the current is limited to 100mA. Attention: Incorrect polarity may damage this unit, please make sure the correct positive and negative polar before wiring.
LED lights on, instantaneous overcurrent in certain output will lead to the corresponding LED lights flash and the current of this channel is limited to 100mA. That is to say, output 1-7 might not be able to work properly if the connected digital effectors are of larger power consumption, then you need to use output 8. 4. OUTPUT 8: Also DC 9V power output with maximum volume of 500mA, it is suitable for digital effectors and DC 9V low-power digital guitar amplifiers. When instantaneous overcurrent occurs in this channel, the corresponding LED light will flash and the current is limited to 500mA. 5. DC12V OUTPUT: The maximum output current is 100mA. When instantaneous overcurrent occurs in this channel, the corresponding LED light will flash and the current is limited to 100mA. 6.
DC18V OUTPUT: The maximum output current is 100mA. When instantaneous overcurrent occurs in this channel, the corresponding LED light will flash and the current is limited to 100mA. Attention: Incorrect polarity may damage this unit, please make sure the correct positive and negative polar before wiring.
Product Description
Reviews/Comments
Add New
Vouchers
No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.
Denmark