The Specialized S-Works Exos Carbon Road Cycling Shoes in White weigh in at just 150 grams, making them the lightest cycling shoes to ever come with a Boa dial. & not only are they ridiculously light, but they still have all the features that are synonymous with the S-Works label. They’ll still perform at the World Tour level, just ridiculously light. To get the weight down to the 150-gram mark without sacrificing power transfer the carbon outsole was developed using an advanced form of Finite Element Analysis & pressure mapping to pull out material where it wasn’t needed. This allowed Specialized to keep crazy-high stiffness numbers, too. For the uppers, Specialized completely removed the heel counter. & with a little help from the space-grade Dyneema mesh & some Cubic Tec reinforcement, the heel moulds to the back of your foot, so hardly a watt is wasted. Lastly, Specialized developed a new Warp Sleeve vamp that lets them get rid of the toe box, & this further cuts down the weight & increases the comfort. None of the weight saving sacrifices coveted Body Geometry features, like the Longitudinal Arch, Varus Wedge, & Metatarsal Button. Each one of these features have been ergonomically designed & scientifically tested to not only boost power, but to also increase efficiency & to reduce the risk of injury. Features Body Geometry sole & footbed are ergonomically designed & scientifically tested to boost power, increase efficiency, & reduce the chance of injury by optimizing hip, knee, & foot alignment. Our lightest FACT Powerline™ carbon plate maximizes power transfer: Stiffness Index 13.0 A revolutionary Dyneema® Mesh allows us to achieve weight without sacrificing hold for the ultimate connection & comfort. BOA® IP1 Fit System for on-the-fly micro-adjustment, backed by the Boa guarantee. Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Non-slip, replaceable heel tread with internally recessed screws for security. Form Fit last with a Warp Sleeve vamp for the ultimate in connectivity, comfort, & speed. Three-bolt cleat pattern fits all major road pedals. Approximate weight: 140g (1/2 pair, Size 42) ...

The Specialized S-Works Exos Carbon Road Cycling Shoes in White weigh in at just 150 grams, making them the lightest cycling shoes to ever come with a Boa dial. & not only are they ridiculously light, but they still have all the features that are synonymous with the S-Works label. They’ll still perform at the World Tour level, just ridiculously light. To get the weight down to the 150-gram mark without sacrificing power transfer the carbon outsole was developed using an advanced form of Finite Element Analysis & pressure mapping to pull out material where it wasn’t needed. This allowed Specialized to keep crazy-high stiffness numbers, too. For the uppers, Specialized completely removed the heel counter. & with a little help from the space-grade Dyneema mesh & some Cubic Tec reinforcement, the heel moulds to the back of your foot, so hardly a watt is wasted. Lastly, Specialized developed a new Warp Sleeve vamp that lets them get rid of the toe box, & this further cuts down the weight & increases the comfort. None of the weight saving sacrifices coveted Body Geometry features, like the Longitudinal Arch, Varus Wedge, & Metatarsal Button. Each one of these features have been ergonomically designed & scientifically tested to not only boost power, but to also increase efficiency & to reduce the risk of injury. Features Body Geometry sole & footbed are ergonomically designed & scientifically tested to boost power, increase efficiency, & reduce the chance of injury by optimizing hip, knee, & foot alignment. Our lightest FACT Powerline™ carbon plate maximizes power transfer: Stiffness Index 13.0 A revolutionary Dyneema® Mesh allows us to achieve weight without sacrificing hold for the ultimate connection & comfort. BOA® IP1 Fit System for on-the-fly micro-adjustment, backed by the Boa guarantee. Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Non-slip, replaceable heel tread with internally recessed screws for security. Form Fit last with a Warp Sleeve vamp for the ultimate in connectivity, comfort, & speed. Three-bolt cleat pattern fits all major road pedals. Approximate weight: 140g (1/2 pair, Size 42) ...

The Specialized S-Works Exos Carbon Road Cycling Shoes in White weigh in at just 150 grams, making them the lightest cycling shoes to ever come with a Boa dial. & not only are they ridiculously light, but they still have all the features that are synonymous with the S-Works label. They’ll still perform at the World Tour level, just ridiculously light. To get the weight down to the 150-gram mark without sacrificing power transfer the carbon outsole was developed using an advanced form of Finite Element Analysis & pressure mapping to pull out material where it wasn’t needed. This allowed Specialized to keep crazy-high stiffness numbers, too. For the uppers, Specialized completely removed the heel counter. & with a little help from the space-grade Dyneema mesh & some Cubic Tec reinforcement, the heel moulds to the back of your foot, so hardly a watt is wasted. Lastly, Specialized developed a new Warp Sleeve vamp that lets them get rid of the toe box, & this further cuts down the weight & increases the comfort. None of the weight saving sacrifices coveted Body Geometry features, like the Longitudinal Arch, Varus Wedge, & Metatarsal Button. Each one of these features have been ergonomically designed & scientifically tested to not only boost power, but to also increase efficiency & to reduce the risk of injury. Features Body Geometry sole & footbed are ergonomically designed & scientifically tested to boost power, increase efficiency, & reduce the chance of injury by optimizing hip, knee, & foot alignment. Our lightest FACT Powerline™ carbon plate maximizes power transfer: Stiffness Index 13.0 A revolutionary Dyneema® Mesh allows us to achieve weight without sacrificing hold for the ultimate connection & comfort. BOA® IP1 Fit System for on-the-fly micro-adjustment, backed by the Boa guarantee. Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Non-slip, replaceable heel tread with internally recessed screws for security. Form Fit last with a Warp Sleeve vamp for the ultimate in connectivity, comfort, & speed. Three-bolt cleat pattern fits all major road pedals. Approximate weight: 140g (1/2 pair, Size 42) ...

The Specialized S-Works Fast Trak 2 Bliss Ready Mountain Bike Tyre 29 x 2.1 has become synonymous with fast & lightweight tyres that are able to handle the most technical XC courses in the most gruelling conditions. The block pattern is carefully arranged for fast rolling abilities & superb traction, while the blocks have been optimized to adapt to slippery surfaces with enough bite for loose ground. They use Specialized’s own GRIPTON compound that maximizes mechanical grip, damps vibration, & offers unparalleled traction in either wet or dry conditions. Features· Casing: 120 TPI· Bead: Foldable· Butyl wrapped bead = 2 Bliss Ready· Compound: GRIPTON®· 29 x 2.1", psi 25-50, approximate weight 550g ...

Specialized S-Works Prevail II Helmet Replacement Visor. This replacement visor works with all Specialized S-Works Prevail helmets. Genuine Specialized Parts from authorised UK retailer. We stock a wide selection of Specialized helmet spare parts. If you can’t find what you want just drop us an email & we’ll try & find the correct part for you. ...

Specialized S-Works Prevail II Helmet Replacement Visor. This replacement visor works with all Specialized S-Works Prevail helmets. Genuine Specialized Parts from authorised UK retailer. We stock a wide selection of Specialized helmet spare parts. If you can’t find what you want just drop us an email & we’ll try & find the correct part for you. ...

The new Specialized S-Works Prevail II Road Cycling Helmet looks cosmetically similar to the old Prevail II but it has been almost completely re-designed & packs in a bunch of new technology. The main body of the new Prevail II is made from Specialized’s patented EPS construction that relies on multi-density foam paired with a robotically woven, Aramid-reinforced skeleton. This creates a reduction in the overall size of the helmet, creating a smaller profile that fits lower down on your head for a better fit & safety. It also has deep internal channels that are aligned from front-to-rear, so the air intake & exhaust are optimized to cool your entire head. If you head does get too hot the Gutter Action System manages the flow of sweat, keeping it away from your eyes & dripping it off of the pads over your temple. When tested in the Specialized wind tunnel the new design saves six seconds over 40km when compared to a "standard" road helmet. The new Prevail II also comes with big safety improvements in the form of MIPS & ANGi. The MIPS system sits inside the helmet & allows it to move slightly with side on impacts, reducing the shock to your brain. If you are unlucky enough to have a crash then the ANGi sensor will detect it & send a text message with your GPS coordinates to your emergency contacts. It also lets friends & family track your rides to see where you are & can alert them if you are out for longer than intended. Put all of this together & you have a super light, super ventilated & super safe helmet for racing or training. Features Patented Energy Optimized Multi-Density EPS construction helps to manage impact energy. Patented aramid-reinforced skeleton provides internal EPS support. Ultra-light Mindset Hair Port II micro-dial fit system with height adjustability for the perfect fit. Mega Mouthport optimizes cooling & sweat evaporation. Aerodynamic design. 4th Dimension Cooling System with deep internal channels, large vents, & aligned exhaust ports. Thin, soft, & lightweight 4X Dry Lite webbing won’t stretch out with sweat or water. Tri-Fix web splitter for enhanced comfort & ease of strap adjustments. Instrap webbing system for ultra-light construction & security. Gutter Action brow pad design for increased comfort & sweat management. Reflective decals for increased visibility to motorists in low-light conditions. Patented clip-on visor included. MIPS-equipped. Integrated ANGI crash sensor. Patented clip-on visor included. ...

The new Specialized S-Works Prevail II Road Cycling Helmet looks cosmetically similar to the old Prevail II but it has been almost completely re-designed & packs in a bunch of new technology. The main body of the new Prevail II is made from Specialized’s patented EPS construction that relies on multi-density foam paired with a robotically woven, Aramid-reinforced skeleton. This creates a reduction in the overall size of the helmet, creating a smaller profile that fits lower down on your head for a better fit & safety. It also has deep internal channels that are aligned from front-to-rear, so the air intake & exhaust are optimized to cool your entire head. If you head does get too hot the Gutter Action System manages the flow of sweat, keeping it away from your eyes & dripping it off of the pads over your temple. When tested in the Specialized wind tunnel the new design saves six seconds over 40km when compared to a "standard" road helmet. The new Prevail II also comes with big safety improvements in the form of MIPS & ANGi. The MIPS system sits inside the helmet & allows it to move slightly with side on impacts, reducing the shock to your brain. If you are unlucky enough to have a crash then the ANGi sensor will detect it & send a text message with your GPS coordinates to your emergency contacts. It also lets friends & family track your rides to see where you are & can alert them if you are out for longer than intended. Put all of this together & you have a super light, super ventilated & super safe helmet for racing or training. Features Patented Energy Optimized Multi-Density EPS construction helps to manage impact energy. Patented aramid-reinforced skeleton provides internal EPS support. Ultra-light Mindset Hair Port II micro-dial fit system with height adjustability for the perfect fit. Mega Mouthport optimizes cooling & sweat evaporation. Aerodynamic design. 4th Dimension Cooling System with deep internal channels, large vents, & aligned exhaust ports. Thin, soft, & lightweight 4X Dry Lite webbing won’t stretch out with sweat or water. Tri-Fix web splitter for enhanced comfort & ease of strap adjustments. Instrap webbing system for ultra-light construction & security. Gutter Action brow pad design for increased comfort & sweat management. Reflective decals for increased visibility to motorists in low-light conditions. Patented clip-on visor included. MIPS-equipped. Integrated ANGI crash sensor. Patented clip-on visor included. ...

The new Specialized S-Works Prevail II Road Cycling Helmet looks cosmetically similar to the old Prevail II but it has been almost completely re-designed & packs in a bunch of new technology. The main body of the new Prevail II is made from Specialized’s patented EPS construction that relies on multi-density foam paired with a robotically woven, Aramid-reinforced skeleton. This creates a reduction in the overall size of the helmet, creating a smaller profile that fits lower down on your head for a better fit & safety. It also has deep internal channels that are aligned from front-to-rear, so the air intake & exhaust are optimized to cool your entire head. If you head does get too hot the Gutter Action System manages the flow of sweat, keeping it away from your eyes & dripping it off of the pads over your temple. When tested in the Specialized wind tunnel the new design saves six seconds over 40km when compared to a "standard" road helmet. The new Prevail II also comes with big safety improvements in the form of MIPS & ANGi. The MIPS system sits inside the helmet & allows it to move slightly with side on impacts, reducing the shock to your brain. If you are unlucky enough to have a crash then the ANGi sensor will detect it & send a text message with your GPS coordinates to your emergency contacts. It also lets friends & family track your rides to see where you are & can alert them if you are out for longer than intended. Put all of this together & you have a super light, super ventilated & super safe helmet for racing or training. Features Patented Energy Optimized Multi-Density EPS construction helps to manage impact energy. Patented aramid-reinforced skeleton provides internal EPS support. Ultra-light Mindset Hair Port II micro-dial fit system with height adjustability for the perfect fit. Mega Mouthport optimizes cooling & sweat evaporation. Aerodynamic design. 4th Dimension Cooling System with deep internal channels, large vents, & aligned exhaust ports. Thin, soft, & lightweight 4X Dry Lite webbing won’t stretch out with sweat or water. Tri-Fix web splitter for enhanced comfort & ease of strap adjustments. Instrap webbing system for ultra-light construction & security. Gutter Action brow pad design for increased comfort & sweat management. Reflective decals for increased visibility to motorists in low-light conditions. Patented clip-on visor included. MIPS-equipped. Integrated ANGI crash sensor. Patented clip-on visor included. ...

The new Specialized S-Works Prevail II Road Cycling Helmet looks cosmetically similar to the old Prevail II but it has been almost completely re-designed & packs in a bunch of new technology. The main body of the new Prevail II is made from Specialized’s patented EPS construction that relies on multi-density foam paired with a robotically woven, Aramid-reinforced skeleton. This creates a reduction in the overall size of the helmet, creating a smaller profile that fits lower down on your head for a better fit & safety. It also has deep internal channels that are aligned from front-to-rear, so the air intake & exhaust are optimized to cool your entire head. If you head does get too hot the Gutter Action System manages the flow of sweat, keeping it away from your eyes & dripping it off of the pads over your temple. When tested in the Specialized wind tunnel the new design saves six seconds over 40km when compared to a "standard" road helmet. The new Prevail II also comes with big safety improvements in the form of MIPS & ANGi. The MIPS system sits inside the helmet & allows it to move slightly with side on impacts, reducing the shock to your brain. If you are unlucky enough to have a crash then the ANGi sensor will detect it & send a text message with your GPS coordinates to your emergency contacts. It also lets friends & family track your rides to see where you are & can alert them if you are out for longer than intended. Put all of this together & you have a super light, super ventilated & super safe helmet for racing or training. Features Patented Energy Optimized Multi-Density EPS construction helps to manage impact energy. Patented aramid-reinforced skeleton provides internal EPS support. Ultra-light Mindset Hair Port II micro-dial fit system with height adjustability for the perfect fit. Mega Mouthport optimizes cooling & sweat evaporation. Aerodynamic design. 4th Dimension Cooling System with deep internal channels, large vents, & aligned exhaust ports. Thin, soft, & lightweight 4X Dry Lite webbing won’t stretch out with sweat or water. Tri-Fix web splitter for enhanced comfort & ease of strap adjustments. Instrap webbing system for ultra-light construction & security. Gutter Action brow pad design for increased comfort & sweat management. Reflective decals for increased visibility to motorists in low-light conditions. Patented clip-on visor included. MIPS-equipped. Integrated ANGI crash sensor. Patented clip-on visor included. ...