More From Contributor

For Campagnolo Record/ Chorus Part of a comprehensive range of freewheel & bottom bracket removal tools oversized centre hole & thin wall design allows use without removal of cones & locknuts investment cast & heat-treated for strength & durability one-inch base fits end of sr-1, frw-1 park tools or simply an adjustable wrench or bench vice high strength tool steel compatible with 11-speed lockrings made in the usa & covered by park tools legendary limited lifetime warranty ...

Available

An accurate way to check for wear of roller & pin on chains 1% of wear is enough to affect chainrings & sprockets, & allow shifting performance to deteriorate Just insert the chain Checkers pins into two links, press the swing arm gauge, & then check the gauge window for an accurate reading Reads wear from 0.25% to 1% 10-speed compatible Made in the USA & covered by Park Tools legendary limited lifetime warranty ...

Available

A worn chain shifts poorly & wears sprockets at an accelerated rate. The CC-3.2 is a Go / No-Go gauge designed to accurately indicate when a chain reaches 0.5% & 0.75% wear
- the point at which most chain manufacturers suggest replacement The chain should be replaced soon if the 0.75% side fits into the chain, before other drive train components also start to wear out fast Longer design measures a greater length of chain, giving greater accuracy Made from precision, laser cut steel Consider that if you replace a chain because of wear other vital drive-chain components may need to be renewed too 10-speed compatible
...

Available

Prolong drive train life with this excellent kit Contains a Cyclone chain cleaner, Gear Clean brush, & 8 oz. of CB-4 Citrus Chain Brite cleaning fluid Everything you need to keep the drivetrain system clean & running super smooth Suitable for derailleur gear, hub gear, & single-speed bikes Made in the USA ...

Available

An update to the perennial shop favourite The CT-3.2 features an adjustable locating shelf so it will remove & install the chain rivet on any bike chain, from 5 to 11-speed derailleur chains to 1/8 & 3/16 inch single-speed chains, making it our most versatile chain splitter Made from investment cast steel, the CT-3.2 has a comfortable to use size & fine thread for making easy work of even the toughest rivets Replaceable pin Please note that CT-3.2 will not peen the rivets on Campagnolo 11-speed chains: for these chains, a CT-11 Rivet Peening Tool is also required Made in the USA & covered by Parks legendary limited lifetime warranty ...

Available

A chain tool that is small enough to go anywhere yet performs like a full-size workshop tool Fine thread & slide-away T-handle gives plenty of pressure at the pin head to move stubborn chain rivets

Includes:: a loosening shelf to release stiff links after assembly Replaceable driving pin head Works on most bicycle chains, including 10-speed Weighs just 77 grams

...

Available

CTPC
- Pair of replacement chain tool pins for CT2 / CT3 / CT5 / CT7 Genuine Park Tool replacement part ...

Available

The CWP-7 is a compact crank puller with a built-in 8mm hex for removing crank bolts

Includes:: two rotating

...

Available

The DAG-2.2 is an indispensable shop tool that can be used to both measure & straighten misaligned derailleur hangers, solving a high percentage of shifting problems Gauge bar made from heavy gauge, chrome plated steel Updated with tighter tolerances for enhanced accuracy Adjusts to fit 20 to 29+ wheels Upgraded, large inner shaft for added strength Replaceable 10mm x 1 threaded tip enhanced clearance & reach to work on more frame/derailleur hanger combos, including low clearance thru axle derailleur hangers Made in the USA & covered by Park Tools legendary limited lifetime warranty ...

Available

Precision component screwdriver machined to exact standards to ensure a perfect fit on compatible component fasteners Featuring an ergonomic, CNC machined & hard anodized 6061 aluminium handle Cross tip (2 Phillips) driver built to exceed JIS standards Covered by Park Tools legendary limited lifetime warranty ...

Available

Park Tool Clamp Covers For PRS2 / 8 W/double Cable Reliefs

Replacement clamp covers for PRS-2OS, PRS-3OS, PRS-5, PRS-6 (made after 1996), PRS-7 and PRS-8 Workstands with double cable reliefs This is the common shop stand jaw cover Clamp models that use this are the 100-3C, 100-5C, and 100-8C clamps Simply discard old covers and install new covers; each set includes two circlips

More From Contributor

Park Tool Clamp Covers For PRS2 / 8 W/double Cable Reliefs

Product Description

Reviews/Comments

Add New

Intelligent Comparison

Price History

Vouchers

Facebook

Jargon Buster

Supplier Information

Community Generated Product Tags

Contact Us

Information

My Account