More From Contributor

An accurate way to check for wear of roller & pin on chains 1% of wear is enough to affect chainrings & sprockets, & allow shifting performance to deteriorate Just insert the chain Checkers pins into two links, press the swing arm gauge, & then check the gauge window for an accurate reading Reads wear from 0.25% to 1% 10-speed compatible Made in the USA & covered by Park Tools legendary limited lifetime warranty ...

Available

A worn chain shifts poorly & wears sprockets at an accelerated rate. The CC-3.2 is a Go / No-Go gauge designed to accurately indicate when a chain reaches 0.5% & 0.75% wear
- the point at which most chain manufacturers suggest replacement The chain should be replaced soon if the 0.75% side fits into the chain, before other drive train components also start to wear out fast Longer design measures a greater length of chain, giving greater accuracy Made from precision, laser cut steel Consider that if you replace a chain because of wear other vital drive-chain components may need to be renewed too 10-speed compatible
...

Available

Prolong drive train life with this excellent kit Contains a Cyclone chain cleaner, Gear Clean brush, & 8 oz. of CB-4 Citrus Chain Brite cleaning fluid Everything you need to keep the drivetrain system clean & running super smooth Suitable for derailleur gear, hub gear, & single-speed bikes Made in the USA ...

Available

An update to the perennial shop favourite The CT-3.2 features an adjustable locating shelf so it will remove & install the chain rivet on any bike chain, from 5 to 11-speed derailleur chains to 1/8 & 3/16 inch single-speed chains, making it our most versatile chain splitter Made from investment cast steel, the CT-3.2 has a comfortable to use size & fine thread for making easy work of even the toughest rivets Replaceable pin Please note that CT-3.2 will not peen the rivets on Campagnolo 11-speed chains: for these chains, a CT-11 Rivet Peening Tool is also required Made in the USA & covered by Parks legendary limited lifetime warranty ...

Available

Replacement clamp covers for PRS-2OS, PRS-3OS, PRS-5, PRS-6 (made after 1996), PRS-7 & PRS-8 Workstands with double cable reliefs This is the common shop stand jaw cover Clamp models that use this are the 100-3C, 100-5C, & 100-8C clamps Simply discard old covers & install new covers; each set

Includes:: two circlips

...

Available

CTPC
- Pair of replacement chain tool pins for CT2 / CT3 / CT5 / CT7 Genuine Park Tool replacement part ...

Available

The CWP-7 is a compact crank puller with a built-in 8mm hex for removing crank bolts

Includes:: two rotating

...

Available

The DAG-2.2 is an indispensable shop tool that can be used to both measure & straighten misaligned derailleur hangers, solving a high percentage of shifting problems Gauge bar made from heavy gauge, chrome plated steel Updated with tighter tolerances for enhanced accuracy Adjusts to fit 20 to 29+ wheels Upgraded, large inner shaft for added strength Replaceable 10mm x 1 threaded tip enhanced clearance & reach to work on more frame/derailleur hanger combos, including low clearance thru axle derailleur hangers Made in the USA & covered by Park Tools legendary limited lifetime warranty ...

Available

Precision component screwdriver machined to exact standards to ensure a perfect fit on compatible component fasteners Featuring an ergonomic, CNC machined & hard anodized 6061 aluminium handle Cross tip (2 Phillips) driver built to exceed JIS standards Covered by Park Tools legendary limited lifetime warranty ...

Available

Also called a sleeping hub, the DH-1 fits into a frames rear dropouts to replace the rear wheel for chain cleaning & transport The unique design allows shifting with the DH-1 installed Works with all derailleur & 1/8 inch chains Works on frames with both open-type dropouts & 12 mm thru axle dropouts ...

Available

Park Tool CT5 Mini Brute Compact Chain Tool

A chain tool that is small enough to go anywhere yet performs like a full-size workshop tool Fine thread and slide-away T-handle gives plenty of pressure at the pin head to move stubborn chain rivets Includes a loosening shelf to release stiff links after assembly Replaceable driving pin head Works on most bicycle chains, including 10-speed Weighs just 77 grams

Availability: In Stock
Supplier: Cycles U K
SKU: 447437

Description Reviews / Comments Add New

Product Description

Reviews/Comments

Add New

Jargon Buster

compact - Carefuly designed to ensure an item has a minimal physical size

speed - A measurement of how fast an object travels between two points

Size - is the measurement of how big an object is in space.

Small - something that takes up less space than normal.

Compact - something that has a lot combined within a small space.

Assembly - A gathering of people for a purpose e.g. a school assembly

Assembly - A gathering of people all together for the same purpose.

Head - The upper part of a body typically separated by the neck.

More From Contributor

Park Tool CT5 Mini Brute Compact Chain Tool

Product Description

Reviews/Comments

Add New

Intelligent Comparison

Price History

Vouchers

Facebook

Jargon Buster

Supplier Information

Community Generated Product Tags

Contact Us

Information

My Account