More From Contributor

An update to the perennial shop favourite The CT-3.2 features an adjustable locating shelf so it will remove & install the chain rivet on any bike chain, from 5 to 11-speed derailleur chains to 1/8 & 3/16 inch single-speed chains, making it our most versatile chain splitter Made from investment cast steel, the CT-3.2 has a comfortable to use size & fine thread for making easy work of even the toughest rivets Replaceable pin Please note that CT-3.2 will not peen the rivets on Campagnolo 11-speed chains: for these chains, a CT-11 Rivet Peening Tool is also required Made in the USA & covered by Parks legendary limited lifetime warranty ...

Available

Replacement clamp covers for PRS-2OS, PRS-3OS, PRS-5, PRS-6 (made after 1996), PRS-7 & PRS-8 Workstands with double cable reliefs This is the common shop stand jaw cover Clamp models that use this are the 100-3C, 100-5C, & 100-8C clamps Simply discard old covers & install new covers; each set

Includes:: two circlips

...

Available

A chain tool that is small enough to go anywhere yet performs like a full-size workshop tool Fine thread & slide-away T-handle gives plenty of pressure at the pin head to move stubborn chain rivets

Includes:: a loosening shelf to release stiff links after assembly Replaceable driving pin head Works on most bicycle chains, including 10-speed Weighs just 77 grams

...

Available

CTPC
- Pair of replacement chain tool pins for CT2 / CT3 / CT5 / CT7 Genuine Park Tool replacement part ...

Available

The CWP-7 is a compact crank puller with a built-in 8mm hex for removing crank bolts

Includes:: two rotating

...

Available

Precision component screwdriver machined to exact standards to ensure a perfect fit on compatible component fasteners Featuring an ergonomic, CNC machined & hard anodized 6061 aluminium handle Cross tip (2 Phillips) driver built to exceed JIS standards Covered by Park Tools legendary limited lifetime warranty ...

Available

Also called a sleeping hub, the DH-1 fits into a frames rear dropouts to replace the rear wheel for chain cleaning & transport The unique design allows shifting with the DH-1 installed Works with all derailleur & 1/8 inch chains Works on frames with both open-type dropouts & 12 mm thru axle dropouts ...

Available

Part of a comprehensive range of freewheel removal tools 12 splines, 22.6mm diameter. Fits Shimano, Sachs Aris, Sun Race, DNP Epoch & other 5-10 speed freewheels The FR-1.3

Includes:: an enlarged thru-hole to accommodate 14mm axles Made in the USA & covered by Park Tools legendary limited lifetime warranty

...

Available

12 splines, 23.5mm diameter Fits Shimano®, SRAM® (including 1x), Sun Race®, Sun Tour®, Chris King® & other cassette lockrings Also fits some Shimano® disc brake lockrings Made in the USA & covered by Park Tools legendary limited lifetime warranty ...

Available

The FR-5.2GT is designed specifically for use when removing & installing cassette lockrings from thru axle hubs Utilizes a 12mm guide pin to stabilize the tool in use Fits 12-spline cassette lockrings from Shimano®, SRAM® (including 1x), Sun Race®, Sun Tour®, Chris King® & others (23.5mm diameter) Fits some Shimano® & similar disc brake rotor lockrings Made in the USA & covered by Park Tools legendary limited lifetime warranty ...

Available

Park Tool Derailleur Hanger Gauge

The DAG-2.2 is an indispensable shop tool that can be used to both measure and straighten misaligned derailleur hangers, solving a high percentage of shifting problems Gauge bar made from heavy gauge, chrome plated steel Updated with tighter tolerances for improved accuracy Adjusts to fit 20 to 29+ wheels Upgraded, large inner shaft for added strength Replaceable 10mm x 1 threaded tip Improved clearance and reach to work on more frame/derailleur hanger combos, including low clearance thru axle derailleur hangers Made in the USA and covered by Park Tools legendary limited lifetime warranty

Availability: In Stock
Supplier: Cycles U K
SKU: QKDAG22

Description Reviews / Comments Add New

Product Description

The DAG-2.2 is an indispensable shop tool that can be used to both measure & straighten misaligned derailleur hangers, solving a high percentage of shifting problems Gauge bar made from heavy gauge, chrome plated steel Updated with tighter tolerances for enhanced accuracy Adjusts to fit 20 to 29+ wheels Upgraded, large inner shaft for added strength Replaceable 10mm x 1 threaded tip enhanced clearance & reach to work on more frame/derailleur hanger combos, including low clearance thru axle derailleur hangers Made in the USA & covered by Park Tools legendary limited lifetime warranty

Reviews/Comments

Add New

Jargon Buster

Steel - An alloy made predominately of Iron combined with <2% carbon

Chrome - A shiney metalic finish where chromium is electroplated onto an object

Warranty - A service provided by the retailer or manufacturer to ensure a device works for a period from new

Chrome - A shiney bright metalic coating of chromium applied to metals

heavy - A concept of weight indicating an item may require some effort to lift or move

Large - something that takes up more space than normal.

Warranty - A purchasers guarantee from the manufacturer for replacement/fix of goods when faulty.

More From Contributor

Park Tool Derailleur Hanger Gauge

Product Description

Reviews/Comments

Add New

Intelligent Comparison

Price History

Vouchers

Facebook

Jargon Buster

Supplier Information

Community Generated Product Tags

Contact Us

Information

My Account