Part of the Laser range of timing tools the 6292 is designed for 1.75 TBi double overhead camshaft turbocharged belt driven engines. Compatible models include: Alfa Romeo 159, Brera, Giulietta, Spider & Lancia Delta from 2009 Engine codes include – 939B1.000, 940A1.000 Completing this kit is a durable manufacture in Sheffield for the highest quality, & presentation in an insert for easy storage. ...

This kit is designed to allow top & bottom steering ball joints fitted to the Land Rover & Range Rover models listed below to be replaced with the axle casing attached to the vehicle. This kit is can be used with: Application: Land Rover Discovery 2 (1998-2004) Range Rover P38 chassis (1995-2002) Completing this joint tool is a robust manufacture in Sheffield & a handy carry case for easy storage. ...

The Laser 12 piece spanner set is made from a reliable chrome vanadium steel with a polished finished. This metric set features the following

Sizes: 8/9/10/11/12/13/14/15/16/17/18/19mm

...

Up to 40, 000 miles the coil packs don’t want to budge in VW/ Audi petrol cars. They sit deep down between the camshafts, access is difficult, & the tight fitting rubber boot will not easily come apart from the spark plug. The answer is this ignition coil puller from Laser. The coil pack securing screw is removed & the coil puller is inserted into the screw hole. Turn the knob & the shaft expands to firmly grip the coil pack which can then be steadily removed without any damage. Equivalent to the OEM T10530 & fits the Golf 2013 onwards, Audi A3 2013 onwards, Seat Leon 2013 onwards & Octavia 2013 onwards, running the 4-cylinder 1.2/1.4 litre direct injection engine, & 4-cylinder direct injection 2.0 litre 4v turbocharger chain drive Generation 111 engines. ...

The Laser 6301 is a BMW timing tool for use with BMW N47 & N57 1.6/2.0/3.0 diesel engines. This handy tool is completed with a reliable manufacture in Sheffield. ...

This tool is used to assist in the diagnosis of an airbag light being constantly on. This set can assist in the diagnosis of a failed air bag unit, failed airbag clock spring, seat-belt pre-tensioners ect. Simply connect in place of the air bag unit to allow the system to test for easy confirmation of component failure. The tool is a 2.5 Ohm resistor with two pin probes & when connected to the associated wiring effectively becomes a dummy airbag. In the UK in 2013 new legislation came in, meaning that MOTs have become stricter in relation to airbags. From this date all airbag warning lights (SRS malfunction warning lights) on the dashboard must light up when the ignition is turned on & must go out once the car is started. Making this a must have set for all garages. ...

The Laser 6325 is part of the range of engine timing tools for GM/SAAB models. This unit works with the following vehicles: Vauxhall/ Opel Signum Turbo 2003-2008, Vectra-C Turbo 2002-2008 Saab 9-3 1.8T 2002-2011, 9-3 1.8T Bio Power 2002-2011, 9-3 2.0t 2002-2012, 9-3 2.0t Bio Power 2010-2012, 9-3XT 2009-2011 Engine codes: Z20NET, B207E, B207, B207L OEM KM-J 38122-A, KM 6362-1, KM 6362-2, KM 6077, 83 96 210, EN-48366-01, EN-48366-002, 83 96 392 Completing this handy tool is a reliable build in Sheffield. ...

The Laser 6328 is designed to remove air brake filters from commercial vehicles which can be extremely tight & difficult to remove without the correct tool. This unit has a size range of 104
- 150mm with a leg length of 64mm. This tool is also spring loaded meaning the product can be driven by a 1/2'' Drive power bar or 24mm ratchet or wrench.
...

This brake rewind tool from Laser features an adjustable adaptor which will fit pistons with a pin distance between 20
- 35 millimetres,
...

The Laser 6332 is a 1/2'' drive crankshaft rotator for use with Man Atego/ Vario HGV vehicles. This unit benefits from a phosphate finish & S45C steel manufacture for added reliability. ...