The Laser 6526 Ratchet has been constructed with a composite handle for a lightweight & easy to use design, along with the quick release function & hanging tag. ...

The Laser Wheel Stud Thread Restorer Master Kit is designed to align & restore both external & internal damaged wheel stud threads. The new master kit brings together two existing sets is for external stud threads & for restoring the internal threads on the hub, & thus offers a complete solution. For external threads on wheel studs & bolts, the split die design allows the two halves of the thread restorer to be fitted to the good thread (normally at the base of the stud). Then the 24mm hex adaptor is fitted over the two halves of the repair die & wound back over the damaged portion of the thread, straightening & restoring it. The set

Includes:: three split dies to suit the most common wheel stud or bolt

Sizes: M12 (1.25mm pitch), M12 (1.5mm pitch) & M14 (1.5mm pitch)



...

The Laser 6528 is designed to set the fuel pump & engine timing. This model is for the Renault Magnum & benfits from a 1/2'' drive & black manganese finish for added reliability. ...

The Laser 6531 is a pneumatic jack with extended height of 550mm, & a minimum height of 200mm. This is combined with a lifting weight of 2 tonnes making it the ideal addition for workshops & garages. This model can also be used in conjunction with axle stands & is lightweight & fast as a lift, for added efficiency while working. Completing this jack is a reliable build, & robust design to ensure it gets the job done time & time again. ...

This versatile oil & fluid extractor from Laser has been designed to extract engine oil from engines via the dipstick tube (or oil service pipe if no dipstick is fitted), using vacuum generated by workshop compressed air pressure. The 10 litre capacity allows the unit to be used on most modern engines, & provides the capacity for at least one sump full of oil while still maintaining a good level of portability. Three extraction hoses are supplied, specifically sized for extracting oil via the dipstick tube, two semi-rigid nylon for use on dipstick tubes & one flexible silicone hose to fit & seal over the oil service pipe. The unit can also be used to extract gearbox oil, automatic transmission fluid & final drive oil & is completed with a reliable manufacture. ...

The Laser 6540 is used to seal flange with integrated sender wheel & is designed for the Volkswagen Crafter (2006<) 5 cyl with BJM engine code. Completing this handy tool is a robust build for long term reliability. ...

The 6549 resistance multimeter tests insulation resistance across three voltage ranges: 250V, 500V, 1000V. This unit also benefits from LCD backlight & low battery indication & comes supplied with test leads & clips, manual & batteries. Completing this multimeter is a solid & hard wearing design, & conformity to CE, EMC, LVD, ROHS alongside meeting IEC10101, CAT111 1000V. ...

The Laser 6551 is a digital clamp tester for AC/DC current measurement & features a small clamp probe for ease of acces to to a 0.5'' jaw aperture. This model also benefits from a special low Amps model for diagnostic work on 4a/80a ranges with 1m A resolution & is ideal to be used with hybrid & electric vehicles. Specification: AC/DC current to 80a, AC/DC voltage 400m V-600V, resistance 400-40, frequency, duty cycle, capacitance, diode & continuity check This unit comes supplied with test leads, carry case & battery CE certification & Ro HS compliance. ...

The Laser 6552 is a digital clamp tester for AC/DC current measurement & features a small clamp probe for ease of acces to to a 0.5'' jaw aperture. This model also benefits from a special low Amps model for diagnostic work on 4a/80a ranges with 1m A resolution & is ideal to be used with hybrid & electric vehicles. Specification: AC/DC current to 1000a, AC/DC voltage to 600v, AC/DC power to 240kw, resistance to 40m, frequency to 10mhz, continuity & diode check, low battery indicator, data hold facility, auto power off. This unit comes supplied with test leads, carry case & battery CE certification & Ro HS compliance. ...

The Laser 6554 camshaft alignment tool is designed to be used with post 2012 Volkswagen Audio group of cars which utilise a 1.4TFSi petrol engine. This tool is compatible with: Audi A1/ Sportback, A3 Cabrio/ Saloon, A3/A3 Sportback, Q3, Seat Ibiza & Volkswagen Golf VII, Passat & Polo Completing this alignment kit is a sturdy & robust build making it ideal for workshops or garages. ...