The Laser 7383 is ideal to be used on hybrid & electric vehicles & for professional electricians, with 50 essential tools with 1000V certification. This set is completed in a robust case &

Includes:: the following: 16 piece 3/8'' Drive socket set: 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 22mm plus 2pc Extension bar 250mm, 150mm, 3/8"D Ratchet & 3 Spline Bits M8, M10, M12 11piece Screwdriver Set: T30x 150mm, T25x 125mm, T20x 100mm, Flat 4mmx 100mm, Flat 3.5mmx 100mm, Flat 3mm x 100mm, Flat 2.5mmx 75mm Circuit Tester, Ph 2x 150mm, Ph 2x 100mm, Ph 1x 80mm 6 piece Plier set including Cable Shears, Bent Nose Plier, Long Nose Plier, Flat Nose Plier, Side Cutter & Water Pump Pliers plus 1 x Insulated Ratchet & 2 x Extension Bars Plus 10 Protective 100mm Sleeves: 5 x 18mm & 5 x 24mm & 1 x insulated cable stripping knife

...

This Short Circuit Diagnostic Kit provides the solution in the form of a set of circuit breaker fuses that are designed to fit in place of the traditional fuse. The circuit breaker will safely break the circuit when an over load is detected just like a conventional fuse but unlike a conventional fuse, it is manually resettable allowing the technician to reset the circuit breaker fuse to run their tests as many times as they need. The kit provides resettable fuses for both standard & mini size blade fuses, & where space is really tight, the set also

Includes:: two 300mm extension leads which allow the Circuit breaker fuse to be connected where space in the fuse box is tight.
Includes:: 7 standard blade manually resettable circuit breaker fuses & 7 mini blade manually resettable circuit breaker fuses.


...

This Short Circuit Diagnostic Kit provides the solution in the form of a set of circuit breaker fuses which are designed to fit in place of the traditional fuse. The circuit breaker will safely break the circuit when an over load is detected just like a conventional fuse but unlike a conventional fuse, it is manually resettable allowing the technician to reset the circuit breaker fuse to run their tests as many times as they need. The kit provides resettable fuses for both standard & mini size blade fuses, & where space is really tight, the set also

Includes:: a 300mm extension leads which allows the Circuit breaker fuse to be connected where space in the fuse box is tight.
Includes:: 7 manually resettable circuit breaker standard blade fuses + 300mm extension loop lead.


...

The Laser 7393 features a 1/4'' drive for bits with a 1/4'' shank with a range of 0.3 Nm
- 1.2 Nm. This unit also features a 1/4''
...

The Laser 7394 features a 1/4'' drive for bits with a 1/4'' shank with a range of 1.2 Nm
- 3.6 Nm. This unit also features a 1/4''
...

The Laser 7403 is a two piece wire cutter, crimper & stripper set that is essential for the electrical workshop. These units feature soft grip handles & heavy duty construction for reliability & hardened steel blades ensure excellent performance. ...

Surprisingly small, but packs a powerful punch! The new Multi-function Jump Starter from Laser Tools (part number 7405) is an efficient & extremely compact emergency engine starting power pack. Packed full of features, it also features a bright LED to illuminate the work area, (flashing mode can be used as an emergency beacon), two USB (Universal Serial Bus) outputs (for charging mobile phones, etc), a Type-C input/output port & a digital voltage display on the cable clamp adaptor. The unit & accessories are supplied in a convenient & protective case. The unit is charged from a suitable USB (Universal Serial Bus) port on a PC, taking Approx. three hours to fully charge. As it charges, the power/charging LED display will cycle through the four LEDs. Once fully charged, the LED display shows four indicator lights ON. To jump start a car with a flat battery, simply connect up the cable clamp adaptor to the jump starter, connect the clamps to the car’s battery & start the car. The jump starter is equipped with two USB (Universal Serial Bus) ports that are suitable for charging & powering mobile phones, tablets, etc. Output 1 is a USB (Universal Serial Bus) QC 3.0 rated port (3.6V – 12V; 1.5A – 3A). Output 2 is a standard USB (Universal Serial Bus) port (5V 2.1A). These are used with the multi-function lead which

Includes:: the following device connectors: USB (Universal Serial Bus), 2 x Type C & a micro-USB (Universal Serial Bus). Port 7 is a Type C input/output port which is used when charging the device but can also output (5V / 3A). Don’t let the small size fool you, the Multi-function Jump Starter will start diesel engines up to 3.5 litres & petrol engines up to 4.5 litres. It is a remarkably versatile & very powerful little jump starter

...

The Laser 7408 is an interchangeable hose clamp plier with three extended flexible cables for standard hose clips, clip-r hose clips & spring & truck hose clips. This product has extended length to get to hard to reach places, & comes with three interchangeable hose clamps in the following

Sizes: 1 x 670mm cable for standard hose clamps 3-52mm 1 x 670mm cable with dual side clamp for spring type & truck hose clamps 0-75mm 1 x 635mm cable for Clic-R hose clamps 0-24mm

...

These angled head bolt cutters are spring loaded for high leverage & benefit from a 35 degree angle head. This unit is completed with dipped handles offering excellent comfort & grip at all times. ...

This tool is designed to allow the brake wheel cylinder to be removed without removing the brake shoes or climbing in the car to apply the hand brake. The tool is used to spread the brake shoes & hold them spread while the cylinder is safely removed & a new cylinder fitted. ...