The Laser 7393 features a 1/4'' drive for bits with a 1/4'' shank with a range of 0.3 Nm
- 1.2 Nm. This unit also features a 1/4''
...

The Laser 7394 features a 1/4'' drive for bits with a 1/4'' shank with a range of 1.2 Nm
- 3.6 Nm. This unit also features a 1/4''
...

The Laser 7395 features a 1/4'' drive for bits with a 1/4'' shank with a range of 2 Nm
- 6 Nm. This unit also features a 1/4''
...

The Laser 7403 is a two piece wire cutter, crimper & stripper set that is essential for the electrical workshop. These units feature soft grip handles & heavy duty construction for reliability & hardened steel blades ensure excellent performance. ...

Surprisingly small, but packs a powerful punch! The new Multi-function Jump Starter from Laser Tools (part number 7405) is an efficient & extremely compact emergency engine starting power pack. Packed full of features, it also features a bright LED to illuminate the work area, (flashing mode can be used as an emergency beacon), two USB (Universal Serial Bus) outputs (for charging mobile phones, etc), a Type-C input/output port & a digital voltage display on the cable clamp adaptor. The unit & accessories are supplied in a convenient & protective case. The unit is charged from a suitable USB (Universal Serial Bus) port on a PC, taking Approx. three hours to fully charge. As it charges, the power/charging LED display will cycle through the four LEDs. Once fully charged, the LED display shows four indicator lights ON. To jump start a car with a flat battery, simply connect up the cable clamp adaptor to the jump starter, connect the clamps to the car’s battery & start the car. The jump starter is equipped with two USB (Universal Serial Bus) ports that are suitable for charging & powering mobile phones, tablets, etc. Output 1 is a USB (Universal Serial Bus) QC 3.0 rated port (3.6V – 12V; 1.5A – 3A). Output 2 is a standard USB (Universal Serial Bus) port (5V 2.1A). These are used with the multi-function lead which

Includes:: the following device connectors: USB (Universal Serial Bus), 2 x Type C & a micro-USB (Universal Serial Bus). Port 7 is a Type C input/output port which is used when charging the device but can also output (5V / 3A). Don’t let the small size fool you, the Multi-function Jump Starter will start diesel engines up to 3.5 litres & petrol engines up to 4.5 litres. It is a remarkably versatile & very powerful little jump starter

...

These angled head bolt cutters are spring loaded for high leverage & benefit from a 35 degree angle head. This unit is completed with dipped handles offering excellent comfort & grip at all times. ...

This tool is designed to allow the brake wheel cylinder to be removed without removing the brake shoes or climbing in the car to apply the hand brake. The tool is used to spread the brake shoes & hold them spread while the cylinder is safely removed & a new cylinder fitted. ...

The Laser 7435 is a 14 piece interchangeable VDE screwdriver set that comes supplied with 2 x main handle (1 x VDE) & a voltage tester (110-230V). This set is manufactured from 86660 steel for added durability &

Includes:: the following: 11 x Screwdriver Heads: Flat 2.5mm, 3.5mm, 4.0mm, 5.5mm, 6.5mm, Phillips Ph 0, Ph 1, Ph 2, Star T10, T15, T20

...

This set is suitable for use on live circuits up to 1500V DC or 1000V AC & is available in the following

Sizes:

...

Hose clip fitting tool for clipless, pre-opened spring band clamps. For fitting pre-tensioned spring clips used on Audi from 2011, Volkswagen, Skoda & Seat from 2013 & found on models across the Ford range from 2018. ...