More From Contributor

This chain wear indicator gauge should be used periodically to measure how much a chain has worn & stretched, ensuring it can then be replaced before it has caused any additional wear to the components that it runs on. A worn chain can be noisy, cause running & gear shifting issues & prematurely wear out sprockets & chain rings which can be costly to replace ...

Available

A 15mm pedal wrench, with super slim profile & long handle, for removing pedals on most modern bicycles. It's slim enough to fit comfortably between the pedal body & crank arm, minimising marking or damage to the pedal arm. The long handle, with comfort grip, allows for enough force to be exerted to remove even the most stubborn of pedals ...

Available

Disc brake tool combining two different functions to ensure that brake rotors can run freely & quietly through the caliper. At one end is a rotor truing fork, with two different length slots allowing for different degrees of leverage to be applied to the rotor to straighten it. The other end is the brake piston press tool, used for gently pushing the pads & pistons back into the caliper when replacing or adjusting the brake pads. ...

Available

Combines a 15mm pedal wrench for removing the pedals on the majority of most modern bicycles, 16mm box spanner, & a chain whip for use when removing & installing sprockets/cassettes. Also known as a sprocket remover, the chain whip holds the cogs on the rear wheel in place as a cassette remover or lockring tool is used to undo the cassette in the opposite direction. ...

Available

Set of 3 compact tyre levers, ideal for road & trail side repairs, as well as general workshop use. The narrow profile makes them easy to slide in & hook underneath the tyre. The spoke hook end allows the levers to hold themselves in place when more than one is required ...

Available

Folding tool kit including a range of essential tools to carry out most road & trail side repairs. The ultra slim size of this alloy multi-tool means that it will easily fit into any saddle bag, back pack, or pocket ...

Available

This headset cup removal tool allows for the quick, easy & safe removing of bearing cups from a bicycle frame. It is designed to slide through the frame until the sprung end engages onto the top of the cup allowing for a simple hammer blow to remove it without causing damage. ...

Available

Allows for the quick & easy installation of press fit bottom brackets without risking damage to the frame. The stepped plates clamp either side of the axle allowing the force screw to be turned, pressing the bearing cups into the bottom bracket shell. Covers a range of different frame sizes ...

Available

Used to install or remove bearing bottom brackets on the majority of bikes fitted with 16-notch external bearing threaded cups. The splines engage securely onto the bottom bracket notches allowing for easy removal or tightening of the cups, without the risk of the tool slipping. It also features an adjustment cap tool for removing & adjusting the end caps on Shimano Hollow Tech II cranks. ...

Available

Designed to access the narrow spaces behind the chainset, this low profile chainring nut spanner holds the nut still to prevent it from turning when tightening or loosening the chainring bolt using a Hex or Star key. ...

Available

Laser Laser 8165 LTR Hub Cone Spanner Set 8pc

Typically 5mm thinner than a regular spanner, cone nut spanners slide between the hub and the axle locking nut, onto the cone nut to allow for the hub bearings to be correctly adjusted. This set of cone nut spanners is ideal for use by both the home or shop mechanic. It includes sizes 13mm to 20mm, with each having a long handle with comfort grip, allowing enough leverage to be applied to cope with tight or corroded cone and axle lock nuts.

Availability: In Stock
Supplier: Machine Mart
SKU: 040818165

Description Reviews / Comments Add New

Product Description

Typically 5mm thinner than a regular spanner, cone nut spanners slide between the hub & the axle locking nut, onto the cone nut to allow for the hub bearings to be correctly adjusted. This set of cone nut spanners is ideal to be used by both the home or shop mechanic. It

Includes:: sizes 13mm to 20mm, with each having a long handle with comfort grip, allowing enough leverage to be applied to cope with tight or corroded cone & axle lock nuts.

Reviews/Comments

Add New

Intelligent Comparison

Available

Laser Laser 8171 LTR 2 Piece Hub Cone Spanner Set Machine Mart

£6.98

Available

Laser Laser 4887 6 Piece 34 - 50mm Jumbo Combination Spanner Set Machine Mart

£130.80

Supplier Information

Machine Mart

Get the job done with Machine Mart (http://www.machinemart.co.uk)! Explore our extensive range of power tools, hand tools, workshop equipment, and more, designed to tackle any DIY project or professional task with ease. From robust drills and saws to sturdy workbenches and storage solutions, we provide everything you need to build, repair, and maintain your home or workplace. With top brands like DeWalt, Makita, and Clarke, you can trust in quality and reliability. Plus, enjoy expert advice, unbeatable prices, and convenient delivery options. Shop now and unleash your potential with Machine Mart!

More From Contributor

Laser Laser 8165 LTR Hub Cone Spanner Set 8pc

Product Description

Reviews/Comments

Add New

Intelligent Comparison

Price History

Vouchers

Facebook

Jargon Buster

Supplier Information

Community Generated Product Tags

Contact Us

Information

My Account