More From Contributor

Typically 5mm thinner than a regular spanner, cone nut spanners slide between the hub & the axle locking nut, onto the cone nut to allow for the hub bearings to be correctly adjusted. This set of cone nut spanners is ideal to be used by both the home or shop mechanic. It

Includes:: sizes 13mm to 20mm, with each having a long handle with comfort grip, allowing enough leverage to be applied to cope with tight or corroded cone & axle lock nuts.

...

Available

Folding tool kit including a range of essential tools to carry out most road & trail side repairs. The ultra slim size of this alloy multi-tool means that it will easily fit into any saddle bag, back pack, or pocket ...

Available

This headset cup removal tool allows for the quick, easy & safe removing of bearing cups from a bicycle frame. It is designed to slide through the frame until the sprung end engages onto the top of the cup allowing for a simple hammer blow to remove it without causing damage. ...

Available

Allows for the quick & easy installation of press fit bottom brackets without risking damage to the frame. The stepped plates clamp either side of the axle allowing the force screw to be turned, pressing the bearing cups into the bottom bracket shell. Covers a range of different frame sizes ...

Available

Used to install or remove bearing bottom brackets on the majority of bikes fitted with 16-notch external bearing threaded cups. The splines engage securely onto the bottom bracket notches allowing for easy removal or tightening of the cups, without the risk of the tool slipping. It also features an adjustment cap tool for removing & adjusting the end caps on Shimano Hollow Tech II cranks. ...

Available

Badly adjusted or loose cone nuts can cause unnecessary wear & damage to both the wheel bearings & inner hub components. These super slim cone spanners allow for the cone nuts to be tightened hard up against the axle lock nuts so that they don't then come undone taking the hub bearings back out of adjustment. This set covers the 4 most popular sizes & are long enough to provide a good amount of leverage. ...

Available

For use when removing & installing sprockets & cassettes. A chain whip, also known as a sprocket remover or a sprocket holder, is used to hold the cogs on the rear wheel in place as a lockring tool is used to undo the cassette in the opposite direction. ...

Available

This crank extractor is used for the correct removal of crank arms & chainsets that use a square-tapered, or splined ISIS Drive, bottom bracket. The threaded collar screws into the crank arm before the drive bolt gently forces the bottom bracket axle away from the tool & out of the crank arm. It also features a 14mm socket at one end for the removal of the crank bolt/nut. ...

Available

For use when having to guide new cables through an internally routed frame, this kit uses magnets to make light work of a task that can be both time-consuming & frustrating. It comes supplied with adaptors to fit inner gear & brake cables, Shimano Di 2 wires (e-Tube cables), outer gear & brake housing, & hydraulic brake lines ...

Available

This adjustable bike stand holds onto the rear wheel fixings, supporting the bike in an upright position, providing a safe way to store or display a bicycle without having to lean it against anything else, as well as providing a simple & steady work st&. The rear wheel can be set so that it is raised off the ground, enabling the rear wheel to be rotated allowing the gears to be checked & adjusted, chain & drivetrain cleaned & the rear wheel inspected to see if it is running true. ...

Available

Laser Laser 8170 LTR Chainring Nut Tool

Designed to access the narrow spaces behind the chainset, this low profile chainring nut spanner holds the nut still to prevent it from turning when tightening or loosening the chainring bolt using a Hex or Star key.

Availability: In Stock
Supplier: Machine Mart
SKU: 040818170

Description Reviews / Comments Add New

Product Description

Reviews/Comments

Add New

Intelligent Comparison

Available

Laser Laser 8199 LTR Chain Keeper Tool Machine Mart

£13.99

Available

Laser Laser 8197 LTR Cassette Lockring Tool Machine Mart

£6.79

Available

Laser Laser 8173 LTR Crank Removal Tool Machine Mart

£9.98

Available

Laser Laser 8172 LTR Chain Whip Machine Mart

£12.98

Available

Laser Laser 8182 LTR Chain Link Pliers Machine Mart

£9.98

Available

Laser Laser 8184 LTR Chain Rivet Extractor Tool Machine Mart

£18.98

Available

Laser Laser 8160 LTR Chain Checker Machine Mart

£6.98

Supplier Information

Machine Mart

Get the job done with Machine Mart (http://www.machinemart.co.uk)! Explore our extensive range of power tools, hand tools, workshop equipment, and more, designed to tackle any DIY project or professional task with ease. From robust drills and saws to sturdy workbenches and storage solutions, we provide everything you need to build, repair, and maintain your home or workplace. With top brands like DeWalt, Makita, and Clarke, you can trust in quality and reliability. Plus, enjoy expert advice, unbeatable prices, and convenient delivery options. Shop now and unleash your potential with Machine Mart!

More From Contributor

Laser Laser 8170 LTR Chainring Nut Tool

Product Description

Reviews/Comments

Add New

Intelligent Comparison

Price History

Vouchers

Facebook

Jargon Buster

Supplier Information

Community Generated Product Tags

Contact Us

Information

My Account