The Lumag MD500H PRO mini dumper is based on the original Lumag MD500H configuration. It offers the same reliable, easy starting Loncin engine & simple drive system but with a “dumper style” tipping butt which is more suited for shifting s&, soils etc. Tipping is fully mechanized by the hydraulic ram. The machine is still only 700mm wide & great to get in those hard to reach areas. The new Pro model now has a innovative Japanese gearbox making a huge difference in usability & efficiency. The chassis has been further enhanced increasing ground clearance & off road ability. ...

The Lumag MD500H PRO-ht mini dumper is based on the original Lumag MD500H configuration. It offers the same reliable, easy starting Loncin engine & simple drive system but with the added high-tip feature. This dumper is suited for all transport work, it's extremely slim & compact design allow it to pass throughy narrow gates whilst the high tip feature allows easy loading & unloading at differing heights. Despite being slim, the MD500H Pro-HT is an extremely powerful unit & the steel construction with hydraulic cylinder provides effective performance & makes it absolutely ideal for all transport tasks. ...

Lumag designed the HC10 RAMBO Chipper to break down branches & sticks up to a 100mm diameter. The Chipper is powered by a 6.5HP single cylinder petrol engine. The engine transmits its power to the chipper drum via a centrifugal clutch & a pair of thick rubber drive belts. The chipper drum is mounted on 2 sealed bearings & features 2 opposing double-sided (reversible) hardened chipper blades, these blades rotate anti-clockwise toward the adjustable counter knife at between 3000 & 4000 RPM. The blade clearance between the chipper blades & chippers counter knife is optimal between 0.5 & 1mm. The chipper can process branches with a maximum diameter of 100mm. We have found that its optimal working range is around 60-80mm depending on the moisture level, hardness & all manners of other factors affecting the wood you are chipping. The Lumag HC10 Chipper is mounted on a 570mm wide chassis. The chipper is fitted with large pneumatic tires making it easy to handle & manoeuvre to your desired chipping area. The HC10 Chipper has been designed with two useful handles on the intake hopper, these are at a nice working height & allow the chipper to be tilted back to a point of balance & moved around easily by h&. The intake hopper of the chipper is also fitted with a hinge making access to the chipper drum & blades very easy. The chipper outlet chute is fitted with a 360-degree swivel head allowing the material from the chipper to be directed to where you need. The Lumag HC10 Chipper is fitted with an emergency cut out switch operated by a safety bar around the chipper’s intake hopper, the chipper’s other safety features include a belt guard covering the chippers drive belts. ...

Lumag designed the HC15 RAMBO Chipper to break down branches & sticks up to a 120mm diameter. The Chipper is powered by a 15HP single cylinder petrol engine. The engine transmits its power to the chipper drum via a centrifugal clutch & a pair of thick rubber drive belts. The HC15 features both an electric key start as well as a traditional recoil start as a backup. The chipper drum is mounted on 2 sealed bearings & features 2 opposing double-sided (reversible) hardened chipper blades, these blades rotate anti-clockwise toward the adjustable counter knife at between 3000 & 4000 RPM. The blade clearance between the chipper blades & chippers counter knife is optimal between 0.5 & 1mm. The chipper can process branches with a maximum diameter of 120mm. We have found that its optimal working range is around 80-100mm depending on the moisture level hardness & all manner of other factors affecting the wood you are chipping. The Lumag HC15 Chipper is mounted on an 800mm wide towable chassis with a 50mm ball hitch & safety chain. The chipper is fitted with large pneumatic tires making it easy to handle & maneuver to your desired chipping area. The HC15 Chipper has been designed with two useful handles integrated into the intake hopper, these are at a nice working height & allow the chipper to be tilted back to a point of balance & moved around easily by hand without a tow vehicle. The intake hopper of the chipper is also fitted with a hinge making access to the chipper drum & blades very easy. The chipper outlet chute is fitted with a 360-degree swivel head allowing the material from the chipper to be directed to where you need. The garden chippers stand leg folds up & is retained by a locking pin for transporting around. (while on tow). The Lumag HC15 Chipper is fitted with an emergency cut out switch operated by a safety bar around the chipper’s intake hopper, the chippers other safety features include a belt guard covering the chipper’s drive belts. ...

The Lumag RP1100pro Compactor Wacker Plate offers great value for your money in terms of Kn per £. This machine is Great ...

The Lumag RP160-HPC 20" petrol Compactor Wacker Plate is a forward/reverse compactor plate. This machine is powerful & manoeuvrable & is great for large paved areas, trench & ground works. The plate size can be increased & decreased by the removal of the side extension plates. It is fitted with an excellent Loncin engine. ...

The new Lumag RP300-HPCA is a forward/reverse compactor wacker plate. This machine is powerful & manoeuvrable, great for large paved areas, trench & ground works. Fitted with the excellent Loncin engine. The machine is easily controlled from the rubber mounted handle with both throttle & directional controls close at h&. The engine cover frame has an integral lifting eye. ...

The Lumag RP700pro Compactor Wacker Plate is a great “all rounder”. This machine is light enough to maneuver & handle but packs enough punch to get the job done. The handles fold down for easy storage. This machine is powered by an excellent Loncin G200 engine. ...

The Lumag RPi 12 compactor wacker plate comes complete with water tank, transport wheels & rubber mat. It is perfect for use with tarmac or dust suppression. The machine is powered by an excellent Loncin G200 engine which is easy to start & faultlessly reliable. The machine is surrounded by a frame protecting the engine & other workings. Comes complete with rubber paving mat & transport axle worth £105.00 ...

The RPi 31 DE is a Diesel forward/reverse compactor plate. This machine is powerful & manoeuvrable making it great for large paved areas, trench & ground works. The plate size can be increased & decreased by the removal of the side extension plates. Fitted with the excellent Loncin engine & a cast iron base plate. ...