Lumag designed the HC15 RAMBO Chipper to break down branches & sticks up to a 120mm diameter. The Chipper is powered by a 15HP single cylinder petrol engine. The engine transmits its power to the chipper drum via a centrifugal clutch & a pair of thick rubber drive belts. The HC15 features both an electric key start as well as a traditional recoil start as a backup. The chipper drum is mounted on 2 sealed bearings & features 2 opposing double-sided (reversible) hardened chipper blades, these blades rotate anti-clockwise toward the adjustable counter knife at between 3000 & 4000 RPM. The blade clearance between the chipper blades & chippers counter knife is optimal between 0.5 & 1mm. The chipper can process branches with a maximum diameter of 120mm. We have found that its optimal working range is around 80-100mm depending on the moisture level hardness & all manner of other factors affecting the wood you are chipping. The Lumag HC15 Chipper is mounted on an 800mm wide towable chassis with a 50mm ball hitch & safety chain. The chipper is fitted with large pneumatic tires making it easy to handle & maneuver to your desired chipping area. The HC15 Chipper has been designed with two useful handles integrated into the intake hopper, these are at a nice working height & allow the chipper to be tilted back to a point of balance & moved around easily by hand without a tow vehicle. The intake hopper of the chipper is also fitted with a hinge making access to the chipper drum & blades very easy. The chipper outlet chute is fitted with a 360-degree swivel head allowing the material from the chipper to be directed to where you need. The garden chippers stand leg folds up & is retained by a locking pin for transporting around. (while on tow). The Lumag HC15 Chipper is fitted with an emergency cut out switch operated by a safety bar around the chipper’s intake hopper, the chippers other safety features include a belt guard covering the chipper’s drive belts. ...

The Lumag RP1100pro Compactor Wacker Plate offers great value for your money in terms of Kn per £. This machine is Great ...

The new Lumag RP130-HPC is a forward/reverse compactor plate. This machine is powerful & maneuverable, great for large paved areas, trench, & groundwork. Fitted with the excellent Loncin engine (A Honda can be fitted at extra cost). The machine is easily controlled from the rubber mounted handle with both throttle & directional controls close at h&. The engine cover frame has an integral lifting eye. ...

The Lumag RP160-HPC 20" petrol Compactor Wacker Plate is a forward/reverse compactor plate. This machine is powerful & manoeuvrable & is great for large paved areas, trench & ground works. The plate size can be increased & decreased by the removal of the side extension plates. It is fitted with an excellent Loncin engine. ...

The new Lumag RP300-HPCA is a forward/reverse compactor wacker plate. This machine is powerful & manoeuvrable, great for large paved areas, trench & ground works. Fitted with the excellent Loncin engine. The machine is easily controlled from the rubber mounted handle with both throttle & directional controls close at h&. The engine cover frame has an integral lifting eye. ...

The Lumag RPi 12 compactor wacker plate comes complete with water tank, transport wheels & rubber mat. It is perfect for use with tarmac or dust suppression. The machine is powered by an excellent Loncin G200 engine which is easy to start & faultlessly reliable. The machine is surrounded by a frame protecting the engine & other workings. Comes complete with rubber paving mat & transport axle worth £105.00 ...

The RPi 31 DE is a Diesel forward/reverse compactor plate. This machine is powerful & manoeuvrable making it great for large paved areas, trench & ground works. The plate size can be increased & decreased by the removal of the side extension plates. Fitted with the excellent Loncin engine & a cast iron base plate. ...

The Lumag RPi 38DE is a diesel reversible compactor plate. This machine is powerful & manoeuvrable, great for large paved areas, trench & groundwork. The machine is easily controlled from the rubber mounted handle with both throttle & directional controls close at h&. The engine cover frame has an integral lifting eye. ...

The Lumag VH500 track barrow is a quality track barrow. Fully hydrostatic, robustly made machine is fitted with a Loncin G200 Engine. This machine was made with durability & ease of use in mind. It is propelled by a top of the range hydraulic pump. This machine will offer years of great service. ...

The Lumag VP60 Compactor Wacker Plate is a lightweight, durable & reliable machine. The machine is powered by an excellent Loncin engine which is protected by a steel frame that also acts as a sturdy lifting eye. For ease of use, the throttle control is mounted on the top of the folding handles. Wheel kit (pictured) sold separately. ...